Speed Queen Washer Dryer Combo Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP338906
The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.
Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.
Symptoms that may indicate a faulty flame sensor include:
- The dryer not heating or producing heat properly
- Error codes related to the gas system or ignition failure
- The dryer shutting off unexpectedly during cycles
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models.
This part fixes the following symptoms
-
Shuts off too soon
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes Jay W. • Dallas , TX • April 05, 2015
I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil...
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Speedqueen part
By: Speedqueen
Part Number: D510185
The Spring Idler is an OEM replacement part for Speed Queen residential clothes dryers. It works with the dryer drum to facilitate the controlled tumbling of laundry items during the drying cycle. Proper functioning is important for efficiency and effectiveness.
Causes of a bad spring idler can include material fatigue from years of repetitive use. It can also result from overloading the dryer with excessively heavy wet loads that put abnormal stress on the idler mechanism.
Symptoms of a failed spring idler include:
- The dryer drum not rotating smoothly
- Clothing failing to tumble freely and wrinkling instead
- Prolonged drying cycles and increased energy use
- Noisy squeaking or creaking emanating from inside the dryer
As the mechanism responsible for facilitating optimal tumbling, this OEM Speed Queen replacement idler spring restores smooth and efficient dryer operation.
Do-It-Yourself Stories from Customers like You
Clothes rolled into ball and nothing seemed to work Gary A. • Bloomington , MN • April 17, 2017
For about the last month or so the clothes (especially sheets) would just roll into a ball (like a big sausage) the wouldn't dry. Kept readjusting the clothes. I went on the internet to see what the issue could be and found lots of advise about shaking out the sheet and clothes first, using tennis balls, and using fuller or smaller loads. None of that worked. But I finally figured out that the reason they roll into a ball is because the belt around the drum is slipping or stretched. This...
Read more
More
$3.92
- Compare At:
-
$4.31
- You Save:
-
$0.39
Genuine Whirlpool part
By: Whirlpool
Part Number: LA-1003
The Door Catch Kit is an OEM part for Whirlpool dryers. It includes the door catch and the necessary mounting hardware to secure it in place. This kit ensures the dryer door remains securely closed during operation, preventing heat loss and ensuring the appliance functions efficiently.
Causes of a bad door catch include regular wear and tear, physical damage, or misalignment of the door, which can impact the catch's ability to latch properly.
Symptoms of a bad door catch include:
- The dryer door not staying closed
- Difficulty latching the door shut
- The dryer stopping mid-cycle due to the door opening
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Door won't close
-
Shuts off too soon
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Door clip to my dryer broke Richard D. • North Dinwiddie , VA • March 15, 2014
Ordered a new clip and installed it. Easy to do. Unplugged the dryer. Removed the front. It is only held on by two screws. Removed wires to the door switch. removed the female end (it had the broken male piece in it. Inserted the new female part in the front, clipped in the male part into the door and reconnected the door switch wires, screwed the front back on. Job done.
Total time was less than 10 minutes. Works like new.
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Speed Queen washer dryer combo replacement parts are an essential component in keeping your laundry routine efficient and trouble-free. These parts ensure that your appliance maintains its effectiveness, allowing you to handle your laundry with ease. Even the most durable appliances can face wear and tear over time, making it crucial to have quality replacement parts to sustain their performance.
The various Speed Queen washer dryer combo parts, including motor belts and control knobs, are specifically designed to keep your appliance functioning as efficiently as the day you bought it. Opting for OEM replacement parts means you are getting high-quality, compatible components tailored for your machine, helping to prevent future issues and ensuring smooth operation.
You can trust that these Speed Queen washer dryer combo replacement parts are both readily available and of the highest standard. By using reliable parts, you'll extend the lifespan of your appliance and keep it working like new. Regular maintenance and timely part replacements are key to enjoying a hassle-free laundry experience.
More