Tappan Range / Cooktop / Oven Bracket & Flange
Genuine Frigidaire part
By: Frigidaire
Part Number: 316112005
The Anti-Tip Bracket Kit is an OEM part for Frigidaire ranges and ovens. This part secures the appliance to the floor or wall, preventing it from tipping over when the oven door is opened or when heavy cookware is placed on an open door or extended rack. The kit typically includes a metal bracket, screws, and installation instructions.
Over time, or during instances of moving or remodeling, the anti-tip bracket may become dislodged or may not be reinstalled correctly, which can compromise the safety of the appliance.
Symptoms of a missing or improperly installed Anti-Tip Bracket include:
- The range or oven tilts forward when pressure is applied to an open door
- The appliance moves more easily than expected when nudged or cleaned
- Visible absence of a bracket at the lower back portion or floor area behind the appliance
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Missing anti tip bracket. Chip M. • Coconut Creek , FL • June 08, 2019
Installed the new bracket as per instructions with template enclosed and it was perfect.
Read more
More
$14.66
- Compare At:
-
$17.30
- You Save:
-
$2.64
Genuine Frigidaire part
By: Frigidaire
Part Number: 316506000
This bracket secures a component inside your range or wall oven. Replacing a bent, broken, or missing bracket restores proper mounting, alignment, and stability to help the appliance operate as designed.
- Provides a solid mounting point for the associated oven/range part
- Helps maintain correct alignment to prevent rattling or rubbing
- Replaces damaged or corroded brackets that no longer hold securely
- Symptoms can include a loose or sagging component, vibration noises, or difficulty keeping a part in position
What's included: 1 bracket Install notes:
- Disconnect power at the breaker; if applicable, shut off gas before servicing
- Use gloves; metal edges can be sharp
- Transfer and reuse original screws or clips; match hole pattern and orientation
- Take photos before removal to ensure correct reassembly
More
$3.95
- Compare At:
-
$4.74
- You Save:
-
$0.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 316416300
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 316257400
$12.61
- Compare At:
-
$13.87
- You Save:
-
$1.26
Genuine Frigidaire part
By: Frigidaire
Part Number: 316091600
$50.95
- Compare At:
-
$60.63
- You Save:
-
$9.68
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 316211900
$38.30
- Compare At:
-
$45.96
- You Save:
-
$7.66
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 316217700
$11.56
- Compare At:
-
$13.76
- You Save:
-
$2.20
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 316217701
$13.61
- Compare At:
-
$16.20
- You Save:
-
$2.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 316245900
$55.95
- Compare At:
-
$66.02
- You Save:
-
$10.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 3131041
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 316286300
This bodyside bracket secures the cabinet/body components to the refrigerator frame, helping keep panels aligned and stable for smooth door operation and consistent sealing. Durable replacement for worn or damaged mounting hardware. What it does:
- Provides a stable mounting point between the cabinet side and internal frame to maintain panel alignment
- Helps prevent cabinet movement that can cause door misalignment or uneven gaps
- Restores proper support after impact, corrosion, or stripped fastener holes
- Compatible with common service repairs where the original bracket is bent or broken
What's included: One bodyside bracket Install notes:
- Designed for use with manufacturer-specified fasteners; reuse or replace screws as needed
- Remove power and empty nearby shelves before working to avoid injury or damage
- Use basic hand tools; avoid overtightening fasteners which can crack plastic or deform panels
More
$14.77
- Compare At:
-
$17.58
- You Save:
-
$2.81
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 316401202
$10.95
- Compare At:
-
$11.33
- You Save:
-
$0.38
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 316443201
This support bracket secures and stabilizes internal appliance components to keep assemblies aligned and reduce vibration. Simple replacement restores proper mounting where worn or damaged brackets allow movement. What it does:
- Provides a secure mounting point for internal parts and assemblies
- Keeps panels and components aligned to prevent rubbing or misalignment
- Reduces rattling or vibration caused by a broken or loose bracket
- Commonly replaced when brackets are bent, cracked, or missing fasteners
What's included: One support bracket. Install notes:
- Disconnect power and water (if applicable) before starting any repair.
- Keep track of all fasteners and mounting hardware; some original screws may be reused.
- Use basic hand tools; avoid overtightening to prevent damage to bracket or mounting points.
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 316498200
$36.22
- Compare At:
-
$43.46
- You Save:
-
$7.24
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 3934057
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 3131069
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Out Of Stock
Usually ships within 4 - 14 days
If you're on the hunt for Tappan range / cooktop / oven bracket or flange replacement parts, you're in the right place. Having the right bracket or flange is essential for maintaining the stability and performance of your Tappan appliance. These Tappan range parts ensure that everything stays securely in place, allowing your cooktop or oven to function seamlessly.
Tappan range brackets and flanges are crucial components that play a key role in the overall integrity of your appliance. Whether you're dealing with the interior structure of the oven or the external mounting of the cooktop, these parts ensure everything fits together perfectly. Using OEM Tappan range replacement parts means you're opting for quality and compatibility, ensuring that each piece works in harmony with your specific model.
So, if you're looking to keep your Tappan appliance in top shape or need to make a timely repair, rest assured that high-quality brackets and flanges are readily available. These parts will get your Tappan range, cooktop, or oven back to performing its best, ensuring you can enjoy your cooking experience without a hitch.
More