Troy-Bilt Pressure Washer Parts

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

The oil seal is designed to stop fluid from leaking out, as well as to ensure that dirt and other debris do not make their way into the oil. When applied properly, it should create an impermeable seal. It also provides spacing between the crankcase and the crankshaft. If the oil seal has been damaged or has degraded because of wear and tear, it will need to be replaced. Some of the signs that the oil seal might be bad include leaks or an engine that is not performing properly. Users might also notice that the machine is going through oil quickly. This is an authentic OEM product that is sold individually. The oil seal can be used with many types of lawn and garden equipment including lawn mowers, snowblowers, tillers, pressure washers, wood chippers, generators, and other small engines. Compatible brands including Briggs & Stratton, Simplicity, Snapper, MTD, Lawn-Boy, Tecumseh, Cub Cadet, Toro, and Craftsman.

Spark plug covers can help to ensure added protection for the sparkplugs and can make sure that there is no debris getting on them. While the spark plug covers are long-lasting, they will eventually need to be replaced. Over time, they will start to dry, crack, and come apart. When this happens, replace the covers right away. Also replace the spark plugs at the same time. The OEM spark plug cover is sold individually, be sure to get enough to cover all the plugs. The cover can work with many different brands, including Craftsman, Briggs & Stratton, Toro, Cub Cadet, Troy-Bilt, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity. The covers can work for many types of machines, including lawnmowers, generators, chippers, log splitters, edgers, pressure washers, tillers, and other small engines.

This is a genuine OEM screw replacement sourced directly from the manufacturer. It is a muffler stud screw used on lawn mowers, snowblowers, and other outdoor lawn and garden engines. This muffler screw attaches the muffler to the engine. These screws go directly through the muffler case and into the engine housing. There is no need for a nut or other fastener. Over time, vibration from the engine may cause them to loosen and possibly fall out. If this happens, the muffler can fall off. Periodic inspection and tightening will prevent this from occurring. A visual inspection as well as checking the tightness by hand will reveal any issues.If the screws are missing or rusted and need to be replaced, make sure the muffler has cooled before attempting to remove the screws. Use a wrench to remove the screws from the muffler. Insert the new screws and hand tighten. Use the wrench to tighten slightly more. Be careful not to overtighten and strip the screws. These screws are 1/4-20 x 2-9/32, gold in color, and sold individually. These muffler shoulder screws are compatible with lawnmowers, snow blowers, chippers, edgers, pressure washers, and other engines manufactured by MTD, Craftsman, Tecumseh, Toro, and Cub Cadet.

This on-off switch terminal is composed of electrical contact areas that connect to a charge or load on a battery. One is marked for positive current while the other is where the current returns to. These terminals can sometimes stop working or suffer corrosion which makes them dangerous to use. Brushing and cleaning a terminal can help remove dirt and debris, but a malfunctioning terminal requires a replacement. This is the case if the corrosion is severe enough to eat away at the metal or the terminal doesn’t clamp on the way that it should. The battery terminals can be removed and replaced using tools like pliers, a socket set, a wrench set, and a hacksaw. This terminal is a genuine OEM component directly from the manufacturer. It’s designed to be used on engines of snowblowers, lawnmowers, chipper shredders, and tillers. It is compatible with Tecumseh, Husqvarna, Toro, Troy-Bilt, Craftsman, Simplicity, Cub Cadet, Briggs & Stratton, and MTD equipment. Some items that can help with installation include anti-corrosion spray, felt pads, and heat-shrink tubing.

Here is a genuine replacement governor shaft that can be used with many types of small engines. The metal governor shaft is used in the cylinder cover to help hold the governor spool and the gear. Without a properly functioning governor shaft, it will cause performance issues with the machine. The shaft is made from metal, and it is durable. However, there may still be a need to replace it at some point. It could have become corroded or damaged, or it could have become lost during another repair. Regardless of the reason, owners will want to replace it sooner rather than later. A wrench and pliers will be needed to make the replacement. This is an authentic OEM part that is the same as the original on the machine. It is sold individually. The part can work with many makes and models of lawnmower, snowblower, log splitter, generator, wood chipper, pressure washer, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.

This is a genuine cylinder head bolt replacement designed for use on select small engines found in outdoor power equipment. The cylinder head bolt is responsible for securing the cylinder head in the engine. It is exposed to constant vibrations and high pressure, which can lead to eventual wear and damage. These bolts will need to be replaced immediately if they become damaged or broken. If the bolts are not replaced, the cylinder head will not be secure and that could cause further engine damage or total failure. This genuine OEM replacement bolt is manufactured by Tecumseh and designed for use in engines in a number of its small outdoor power machines. This part is compatible with dozens of engines and the exact number of bolts and placement may vary based on the model. The parts diagram should provide information on the application and location of this part. This bolt is sold as an individual unit, and those who need more than one will have to order multiple quantities. Always wear gloves for hand protection and allow the engine to cool before performing any engine repairs. This replacement bolt requires a hex socket or screwdriver.

This is a genuine throttle return spring used on select small engines. The throttle return spring is part of the throttle system. It is attached to the throttle cable and the throttle body or carburetor, and is responsible for pushing the throttle closed when the gas is released and opening the throttle when the throttle trigger is engaged. If the spring is faulty, the throttle will not be able to open and close properly. This can affect the machine's ability to operate and even prevent it from operating at all if the throttle remains closed and no power can get through. A replacement should be done as soon as possible to prevent further damage to the engine. This genuine OEM throttle return spring is manufactured by Tecumseh, and compatible with machines from Toro, Husqvarna, MTD, Lawn Boy, and Tecumseh. There are over 150 models that can use this replacement part. It is made of durable metal and sold as an individual part. This throttle return spring is a simple replacement that should only take a few minutes. Be sure to use care when replacing the spring because it can be susceptible to damage under excessive pressure or strain.

This is a genuine replacement flywheel nut that comes from the manufacturer Tecumseh. Nuts are used in various applications in a range of different types of machines. This flywheel nut is made from metal and is used to fasten the engine's flywheel to the crankshaft assembly. It helps to ensure that the connection is tight and that it does not start to come loose during operation. Nuts are a commonly lost part when making repairs on a machine or even during routine maintenance. The flywheel nut could also become corroded or otherwise damaged over years of use. If this happens, owners will want to be sure to replace the nut as soon as possible. Replacement for the flywheel nut tends to be fast and simple. This is an authentic OEM flywheel nut that is sold individually. The nut is a common part and can be used on many different machines. These include lawn mowers, snowblowers, generators, log splitter, wood chippers, pressure washers, generators, tillers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.