White Westinghouse Dishwasher Handle
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304442175
Color: Black
Note: White / Almond colors are no longer available.
The Dishwasher Door Latch Kit is an OEM part for Frigidaire dishwashers. This kit includes the latch mechanism and necessary components to secure the dishwasher door during operation. The latch ensures that the door stays tightly closed, preventing water leaks and enabling the dishwasher to run its cycles efficiently.
You should replace the door latch kit if it becomes faulty or damaged. Common causes of a bad door latch include regular wear and tear from frequent use, physical damage from forceful closing, or misalignment over time. A compromised door latch can lead to the dishwasher not starting, interruptions during cycles, and potential water leaks.
Symptoms of a bad door latch kit include:
- Dishwasher door not staying closed
- Dishwasher not starting or stopping mid-cycle
- Water leaks from the door area
- Difficulty in latching or unlatching the door
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Door latch failure
-
Door won't close
See more...
Do-It-Yourself Stories from Customers like You
My old door latch was not making a consistent connection the diswaher wouldd stop mid cycle and you had to jiggle it to get it to finish William K. • Gettysburg , PA • August 22, 2014
I turned off the power then removed the six or so screws from the back of the top panel. I marked the two front wires on the latch with tape so I would not get them confused. I removed the two screws holding the latch on--these take a six pointed star bit on the screw driver--the bit is in most screw driver sets with interchangeable heads. I then connected the wires to the new latach and put everything back together. The whole process took between ten and fifteen minutes.
Read more
More
$93.95
- Compare At:
-
$112.74
- You Save:
-
$18.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 154662601
The Door Strike is an OEM replacement part for Frigidaire dishwashers. It helps to secure the dishwasher door in the closed position during wash cycles. The door strike works with the door latch mechanism to provide a tight seal to help prevent water, debris, and unwanted odors from escaping the washer interior.
Symptoms of a bad door strike include:
- The dishwasher door not latching and popping open during cycles
- Leaks or water escaping around the door seal
- The door not feeling secure when closed
- Increased noise levels from a poor door seal
Over time, the door strike can become worn, bent, or damaged from normal use. Ensure your dishwasher door seals tightly with this genuine OEM Frigidaire replacement part.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Door latch failure
-
Door won't close
See more...
Do-It-Yourself Stories from Customers like You
Door was not closing properly Channoya W. • Jacksonville , NC • March 20, 2014
Replaced the door strike
Read more
More
$45.95
- Compare At:
-
$55.14
- You Save:
-
$9.19
Genuine Frigidaire part
By: Frigidaire
Part Number: A00104102
This replacement latch secures the door closed so the appliance can operate correctly. Restores a positive close and consistent door recognition to help prevent no-starts and intermittent operation. What it does / common symptoms:
- Engages the strike to hold the door/panel closed
- Ensures the door-closed signal is made so controls can run
- Worn or broken latch may cause the door not to stay shut
- Unit may not start, show a "door" message, or stop if the door is bumped
What's included:
Install notes:
- Disconnect power before servicing; turn off water supply if applicable
- Access the latch per model—typically behind the front panel or inner door liner
- Note and transfer any springs/clips from the original latch to the new one
- Verify smooth open/close and proper strike engagement before testing operation
Do-It-Yourself Stories from Customers like You
Broken dishwasher latch. Michael M. • Middle River , MD • January 24, 2018
I always come to Appliance Parts Pros for my parts. Ordered the handle, and it arrived in a few days. Took me all of 10 minutes to replace the worn part. Even picked up a new tub gasket while I was at on here. That has made the washer a lot less noisy. I recommend these guys to anyone who is even a novice DIYer.
Read more
More
$68.37
- Compare At:
-
$82.04
- You Save:
-
$13.67
White Westinghouse dishwasher handle replacement parts are essential for maintaining the efficiency and appearance of your trusty appliance. Whether you rely on your dishwasher daily or a few times a week, having a functional handle is crucial for easy access and operation. The handle plays a significant role in the overall usability, allowing you to open and close the appliance smoothly.
Using White Westinghouse dishwasher parts, particularly OEM replacement parts, ensures that you're not compromising on quality or fit. These handles are designed specifically for your dishwasher model, meaning they will seamlessly integrate into your appliance without any fuss. You can rest easy knowing that OEM parts maintain the original integrity and performance of your dishwasher.
If your dishwasher handle is showing signs of wear or has stopped working altogether, you don't have to worry. High-quality replacement handles are readily available to get your appliance back in top shape. With a new handle, your beloved White Westinghouse dishwasher will continue to serve you well for years to come.
More