Conor C Waterford , VA June 12, 2014 Appliance: Model JEN AIR WW30430B Broiler element stuck on even after breaker reset Replaced the primary oven relay board which controlled the broiler element and everything worked fine. Project took a bit longer than anticipated because there are many wires connected to the relay board and I took pictures along the way and worked to swap wires a small set at a time so that it was easy to keep track of which went where. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Brian L Marietta , GA March 12, 2014 Jenn Air oven would broil but not heat for baking. Clock display no longer worked. Tested continuity on bake element and it was fine. Replaced temp sensor. Replaced control board and that fixed the clock but still did not have any voltage going to the bake element. Replaced relay board. Bam... problem solved. Now i have a clean (byproduct of pulling it out of the wall and doing the repairs) over that heats as expected and accurately keeps temperature. Service with AppliancePartsPros was way beyond expectations. Great customer support. Great delivery. Highly Recommended!!!! Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers, Socket Set
Christopher K Silver Spring , MD January 28, 2016 Lower burner did not heat Replaced top relay board. Remove oven from wall, remove lid. Remove and replace relay board. Replace lid, install oven and test. Works great again! Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Peter S Canonsburg , PA March 21, 2016 Appliance: Jenn-Air Electric Wall Oven JJW9630BAB Oven would shut off before reaching temperature or just shut off randomly Went to the repair forum and it seemed like similar issues all pointed to the upper oven controller. I thought the controller was where the power to all of the burners was switched on and off, so that made sense. The oven was about 12 years old, so based on what the forum kept pointing too and age I went for the new controller. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
James S Chester , WV June 23, 2014 Upper oven would not heat CHANGED CONTROL BOARD Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers