George D Mountlake Terrace , WA November 02, 2015 The control panel on my gas oven went dark no clock or oven control the burners on the stove still worked I opened up the back of the oven and checked for input and output voltages on the power supply, After testing and seeing no voltage output to the control panel I diagnosed it as being the power supply Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Santhus K Jacksonville , FL March 17, 2015 Appliance: Whirlpool 30" Electric Ceran Freestanding Range Self Clean GR465LXLS0 Was not able to use the oven due to f2 e0 error code Call technical support and told them what was going on they help me troubleshoot, I had this code four months ago and at that time it was one of my sensor element. I used my Voltmeter to rule out the sensor this time. If you ohm the sensor out with the meter a good reading should read 1100 ohms, bad reading will read less then 1000 ohms. I order the Power Supply, Pca. After installing it my problem with my oven was corrected. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Phillip S Medon , TN April 13, 2015 Appliance: Whirlpool Range RF388LXKT0 Rf388lxkt0 control panel intermittently blanks out Checked the connector and there was a cold solder connection on the power supply board. Replaced power supply board. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers