Whirlpool WP4337605 Element - Bake OEM Part

Replaced with new one. when I typed in model num or search a picture of 2 different kind was stumped. got on parts chat and danny scored a home run .I didn't think they had it,but I learned its better to ask . so look if you don't see it ask. just in time for turkey day.

Looked up the appropriate model and verified that the part was the correct one. When it arrived, I unplugged the oven. I removed the racks. I found the proper socket to fit the screws and unscrewed the old bake element. I carefully pulled it out to make sure the cables wouldn't be disconnected. I staged the new element under the existing one, unplugged one terminal, reconnected to the new element, then unplugged the other terminal and connected it to the new element. After the terminals were securely connected, I re-seated it in the back of the oven, replaced and tightened the screws, put the racks back in, and plugged in the oven. I gave it a quick test to make sure it heated up, left it running for ~10 minutes to burn off anything on the burner, then turned off the oven. Total time was ~ 15 minutes.

Ordered and replaced the element. Was hoping the wires were long enough to pull through the back of the oven wall. They were not. Pulled the stove out from the wall, removed the cover and plugged in the wires. Pushed the stove back in place. Reconnected the power and tested the element. Worked like a charm. Heated it up until the element did not smoke any more from the new, finger oils and such. Now waiting for my customer to bake me a pie, her specialty.

I fixed it according to your video which was very helpful.