Brian P West Covina , CA March 30, 2017 Appliance: Maytag Freestanding-Double Oven-Gas MGR6772BDS Two front burners were not lighting I noticed the spark from the electrode was weak, and sparking intermittently Upon visual inspection, I found the white insulation around the electrode had cracked on one, and was starting to show hairline cracks on the other. The electrode is held in by one screw underneath the stove top. On our particular unit, when you open the top oven door, there are two screws accessible on under the front of the stove top. Once you remove the screws, you can then lift the range top up to access the screws. Once I lifted the stove top, I did run into a problem with the screws holding the electrode to the burner. They were very difficult to remove, and I ended up stripping one of the screws having to order a burner assembly on one side. Other than that, it isn't a hard DIY job. Best of luck for those replacing their electrodes, and I hope my info is useful. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers
Lee K Fort Wright , KY October 28, 2016 Cracked end caps on our maytag gemini range Replaced both end caps. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers