Mary C Bronx , NY September 07, 2015 Needed a new gasket It was bad at all I was able to get it done in about 1 1/2 I had to unscrew the nuts and place new gasket and the place new gasket and put back the nuts Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Nut Drivers
Vincent M Levittown , NY July 08, 2021 Appliance: Amana Refrigerator DRB1801AC Ice build up in the freezer. 1st I unplugged the cord to the outlet then used a hairdryer to melt the ice build-up. We used a lot of towels on the floor 2 used 8mm socket to back out the screws just enough so I can use a screwdriver to pry the old gasket out 3 cleaned the crud build up over the years 4 installed the new gasket. I used a paint stick so I didn't puncture the new gasket as I guided the gasket lip into position 5 retighten the screws ( do not overtighten or you strip the screws ) Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers, Socket Set