Edwin N Cumming , GA January 14, 2019 Appliance: Maytag 30" Gas Built-In Downdraft Cooktop JGD8430ADB14 Stove ignition would not stop sparking even with all knobs in "off" position I disconnected the downdraft exhaust pipe and unplugged the stove. I lifted up the stove and rested, supported it over the opening with a few pieces of scrap lumber. Opening the stove, I found all 4 switches dirty. After disconnecting one-at-a-time, I found the faulty switch. Shopping for a replacement, I noticed a parts diagram showing grommets around the knobs. My stove was missing all the grommets, allowing debris to gunk up the switches. Since switches are expensive, I cleaned mine in a bath of rubbing alcohol, let them dry out, and then sprayed them liberally with DeOxit (an electronics cleaner). That fixed the immediate problem. I ordered the grommets and reassembled the stove. The grommets arrived in a few days, and installation took under 5 minutes.J Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Pliers, Screwdrivers
John Q Houston , TX April 22, 2025 Replacement of cool knobs Replaced control knobs. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Bowman M Colorado Springs , CO September 02, 2016 Appliance: Model JENNAIRE Needed new gaskets for to knobs on gas cook top old ones were disintegrating Big deal was to find the parts. Glad you had them. Once delivered, it was just pop out the old and put in the new. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Byron N Wharton , TX December 04, 2025 Missing knob Replaced the knob Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes