John E Rhinelander , WI January 06, 2020 Hose from whirlpool was too short Replaced hose that came with the new washer with this longer one. Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Joseph G Kapolei , HI July 04, 2014 Appliance: Whirlpool Washer WFW94HEXW2 Smelly front loading washing machine I replaced the internal drain hose and the external drain hose and I also installed the washer fan to keep the washing machine from building up mold Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Pliers, Screwdrivers, Socket Set
Thomas C Rostraver Twp , PA January 30, 2021 Drain hoses ( interior and exterior ) were old and dirty. Upon cleaning my washer filter, I noticed that the hoses were very dirty. Instead of trying to clean, I decided to purchase new ones. Good price and fit perfect. Thanks Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers
Camilo C Morton Grove , IL February 13, 2017 Smelling drain pipes Replaced 2 pipes exterior drain pipe and pipe inside the washing machine. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers
Kyle D Sikeston , MO May 10, 2019 Appliance: Maytag Washer MHW8000AG0 Leaking water from water inlet flow meter Replaced water inlet flow meter that had a crack in side of the old one. Start by unplugging machine from wall, used nut driver to remove 3 screws across top and lifted top off machine, then removed all the screws with nut driver on cover on back of machine, probably a dozen in total. The water inlet valve is located on top side, take photo with your camera then remove wires from solenoids to make access easier. Use channel locks or pliers, squeeze hose clamps and move away from water inlet flow meter. Take wire loose from WIF then twist back and forth and pull hose loose on one side, then the other. Replace with new valve and reverse procedure plugging wire back up when complete. Plug all your other wires up after looking at photo. Replace drain hoses by using channel locks, reassemble and put back and top on. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Screwdrivers