Jerome B Tamarac , FL December 19, 2015 Appliance: Model W10403815A Error code f1e0 with loud continuous beep clock oven or controls wont work Burmers work but oven, clock, and all other controls on the range doesn't. Diagnosed probled using the technician service manual. Error code listed in table as internal board failure. Replace Controls (boards). I unplug the range, removethe metal backing, unscrew the main contol board (at the top just 'behind the clock') Remove the connectors from the back of the board, ensure to note the location and orientation of all connectors. The connectors may be hard to fit in the wrong n location (hard but possible) but they can be easily be installed reversed in any position, they are not keyed!!!! Ensure u not orientation, take a picture if you must. Record the part # and go internet shopping. I've used APPro before so I came directly here. Many parts are shipped from local warehouses. I got mine in 2 days and I used regular delivery. Plus connectors on the new board and carefully mount it back in position. Replace back panel and plug the range back in. Now you are good to go! Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers