Belton T Round O , SC September 08, 2018 Appliance: Model W10778578 I purchased the appliance used and it was set up to use natural gas, I needed it to run on propane. I purchased a burner and a oven orifice replacement kit from Appliance Parts Pros. I downloaded an installation manual from Whirlpool and followed the instructions. It was pretty easy. The front burner orifices could be replaced by just taking off the burner cover. The back ones required removing the burner diffuser. You will need to reattach the back burner bottom assembies after you remove the diffuser before you unscrew the orifice or it might bend the burner piping causing it to not line up with the mounting holes. The instructions recommended putting some masking tape over the nut driver end to provide a interference fit for the orifices so they wouldn't fall out. This was very helpful. Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Nut Drivers, Screwdrivers, Socket Set
Phillip D Yuma , AZ December 12, 2021 Appliance: Model WFG535S0LS1 Stove configured for natural gas. I reconfigured the stove for Propane. I did it without any instructions. I replaced all jets. Can be done much quicker then I did it with written instructions. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Adjustable Wrench, Nut Drivers, Pliers
Alex M Salvo , NC July 29, 2023 Needed a conversion kit. Installed . worked well. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Adjustable Wrench, Nut Drivers, Pliers, Wrench Set
Debbie G Powhattan , KS February 18, 2025 Our new stove was a natural gas stove so had to convert to propane With these parts Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers, Socket Set