Whirlpool WP9781049 Light Lens OEM Part

Troubleshot the oven by checking the broiler which worked good (same fuel valve). After reading the some tips about troubleshooting the Glow Ignitor I could see the broiler ignitor got white hot and the oven ignitor only got bright orange (orange to red causes intermittent ignition or mini explosions). Watched the how to video and it was good information. You should be observant about which openings in the back of the oven as to where the two wires are coming out of. My oven is over 12 years old and I had to use a Dremal to cut the heads off the four screws retaining the flame spreader (piece of metal over the burner). The screws I ordered from the Illustrate Parts Breakdown were not the correct thread type so I had to go buy four more from HD. Replacing the Glow Ignitor was an easy task after watching the DIY video. Replacing the lightbulb is an ongoing issue. I need to troubleshoot that a little more. Changed out the bulb (no help). I think the socket has been heat damaged because my renters removed the light lens and broke the bulb off down to the socket which I had to remove with needle nose pliers (disconnect the electrical first). But the oven works great! I've always receive great reliable support from ApplicancePartsPro. On this particular oven I've changed out; the wiring harness going to the stove top burner valves, oven door glass, stove top burner valves, plastic end pieces and now the oven glow ignitor. I recommend and I let others know about this website. Semper Fi

Unscrewed the broken one, received the new one and screwed it in place

Ordered the part from you, then fixed it. Thanks, Larry

Simply removed the cracked lens, had to use a tool to remove the lamp Once all removed, re-installation took less then 5 minutes

Ordered a new light cover and screwed it in. It was easy and works fine.