Morris C Laurel , MT July 09, 2021 Appliance: Kenmore Electric Dryer 11066812690 The clips and springs were damaged on the bottom compartment Replaced the clips and springs. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes
Lovell F Lexington , KY October 13, 2014 Appliance: Model LS19901A0 Parts were missing on equipment Located parts from Appliance Parts Pros.com site and ordered the parts. Took only a couple of days to gets parts shipped to me and Install the parts in the equipment. Fit perfect. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers
David W Purvis , MS March 13, 2016 Appliance: Model MAYTAG DRYER Belt pulley was worn and squeaking i got angry and ripped the front of dryer off I ordered new pulley and keeper pins. I gently lubed and pushed it in slowly. It was magnificent. So tight yet a perfect fit. I'm so satified. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Roger B Montgomery , NJ January 21, 2019 Appliance: Model WED05600XWD Whirlpool dryer wouldn't start tumbling unless it had a very light load. Ordered a kit with new belt, rollers and idler pulley. Used instructions in kit, YouTube videos and instructions I found under the console of the dryer. Found that the idler pulley had frozen and that the belt was nearly worn through. Repair it self was not difficult. The problem I had was in hooking the new belt around the idler pulley. It was solved by removing the one screw holding the air discharge tube and sliding the tube rearwards. This allowed me to get my arm in behind the idler pulley and hooking it around the new belt. Remember to remove the clip holding the discharge tube at the back of the dryer so the tube can slide back giving you room to reach the idler pulley. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Screwdrivers, Socket Set