Whirlpool WP99003317 Dispenser Assembly OEM Part

Ordered the part. Arrived the next day. Took the eleven screws off the door exposing the back of the Soap/Rinse Aid dispenser. Six screws hold it on the inside of the door. Popped off easily. There is a plug that runs from the timer to the dispenser…it's a pain to get off. Use a flat head screw driver. Screwed the new unit in place. Plugged it in. Put the door back together. I accidentally caught the door catch in the door and screwed it together seizing it...so I had to take the top screws off again….release the door catch and screw it back together. Whole deal took 20 minutes even with the dog helping me the whole time. Save the $100 service call. Easy fix. BL

I checked your site for suggestions on what could be the problem. Ordered the part with standard shipping and received the part next day. Replacement was vrey easy. Took the 11 -T20 torq screws out on the inside panel of door, removed the panel, removed 3- 5/16th hex head screws on a panel covering the back side of dispenser, unpluged the wires going to dispenser.(did have to use small flat head screwdriver to loosen the plug on the actuator of the dispenser to remove wires) Removed 6 -5/16th holding in the dispenser,removed dispenser, cleaned up area where dispenser attaches and reversed the steps and within 20 minutes dishwasher up and running again.

Replaced part by removing door liner to disassemble existing Rinse Aid Dispenser and reinstalled replacement. Reconnected wires and reassembled by using existing fasteners to mount the new part and re-secure door liner.

Replaced dispenser, parts came quickly, installation video made change out easy.

Replaced the Soap/Rinse Aid dispenser. I suggest paying attention to the wiring orientation when disassembling. I didn't. Either I got lucky, or it didn't matter because it worked after I got through.