Whirlpool WPW10475495 Roller OEM Part

Replace front & rear wheels.

The rear rollers took less than 5 mins each- tilt the frig against a wall, unscrew the single hex head bolt one at a time just behind each roller, when the frame drops down slide the pin out, replace the roller, and reinsert that bolt. Done. The front roller is a little tougher, in hindsight I'd recommend replacing the entire adjustable assembly; it's more expensive but much easier. To replace the roller alone I had to work the bucked end of each roller axle down to the same diameter as the axle so it could then slide out of the housing and a new roller put in place. Re-mushrooming that end of the pin is a challenge once the roller is in place, but not insurmountable just time-consuming.

Left side wheels damaged from tenant running over floor register. Replaced all 4-rollers in rear and front of the refrigerator. Appliance Parts repair video was important to the success of the replacement.

Lifted refrigerator in front and back. Removed roller pin holding assembly. Removed defective assembly and replaced with new.

Watched a video. Removed 3 bolts propped the frig on a 2x4 dropped the pan pulled the pin and installed the wheel.