Gaines S Donna , TX March 18, 2017 Door switch wasn't working Ordered new part. watched repair instructions on UTube. repair went well. Struggled with the grommet that holds the wiring harness. Didn't see that another grommet comes with the switch and wiring harness. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Roger B Montgomery , NJ January 21, 2019 Appliance: Model WED05600XWD Whirlpool dryer wouldn't start tumbling unless it had a very light load. Ordered a kit with new belt, rollers and idler pulley. Used instructions in kit, YouTube videos and instructions I found under the console of the dryer. Found that the idler pulley had frozen and that the belt was nearly worn through. Repair it self was not difficult. The problem I had was in hooking the new belt around the idler pulley. It was solved by removing the one screw holding the air discharge tube and sliding the tube rearwards. This allowed me to get my arm in behind the idler pulley and hooking it around the new belt. Remember to remove the clip holding the discharge tube at the back of the dryer so the tube can slide back giving you room to reach the idler pulley. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Screwdrivers, Socket Set