Whirlpool W10323246 Venting Kit OEM Part

Used the Wpl. Vent Kit, 4-way. This is not a quick, easy job. You have to disassemble the dryer, removing the entire front, door, drum, and control panel. Take your time and take pictures as you go so you can get it all back together again after installing the conversion kit. It will take you at least an hour, and you need room to work. Also, remember that after converting the dryer over to left or right vent, you now have a wider dryer with the ducting sticking out the side. (4") Make sure it will fit in the door!

The kit provided everything needed. The most important item in the kit are the directions, as you have to almost take the dryer fully apart to do this. Unfortunately, I couldn't use the front vent on the side I wanted, had to use the one more to the rear because my model dryer had the motor in the way of the front vent. I'd already set up the outside vent to align with the front vent, so I needed two more elbows to hook up the dryer. If you want to save money you could just buy an elbow, two pieces of 4-inch pipe and some hose clamps and cut the pipe to length instead of using the kit, but the kit makes it easier.

Purchased a side vent kit from AppliancePartsPros.com.

Purchased bottom venting kit. Followed YouTube video installation guide.