Yard Machines Leaf Blower Parts

This genuine OEM starter handle is sourced directly from the manufacturer. The starter handle is the visible part of the starter rope component of the pull-start system. This starter system is standard on outdoor lawn and garden equipment. The starter handle is attached to the end of the starter-rope by means of a pass-through hole on the handle. The rope is pushed through the hole, tied, and pulled back into the handle to conceal the knot. The starter handle is made of durable plastic. The heat from the sun and repeated daily use may cause the handle to weaken and break. Cracked starter handles can become a safety hazard. Gripping and pulling a cracked handle can cut skin. Broken handles can also be hard to grip, making it difficult to get a good pull on the starter rope. Thankfully, replacement is simple and no tools are required. Make sure the spark plug is out of the machine to prevent accidental engine starting. Push the rope back up through the handle. Untie the knot but do not let the string go; push it up through the hole in the new handle and tie a knot in the end. Reinstall the spark plug.The starter handle is sold as a single unit. It is designed for leaf blowers, wood chippers, and small engines and is compatible with MTD, Cub Cadet, Troy-Bilt, and Yard Machines.

This is a genuine OEM valve cover kit which contains the valve cover and inner gasket. The valve cover covers the engine's valves on chippers, tillers, log splitters, and other outdoor lawn and garden equipment. The cover protects the valves from exposure to weather and prevents oil from seeping out and causing damage. The gasket inside the valve cover ensures the lid is sealed tightly against the engine.Valve covers and the gasket require periodic inspection and regular maintenance. An inspection will indicate if removal and replacement are needed. Maintenance assures the gasket is replaced periodically to keep the seal tight. Heat, rain, snow, and normal wear and tear can lead to cracks in the cover and the gasket. Leaking oil, smelling burned oil, engine misfires, and reduced engine performance are good signs that the gasket and cover need to be removed and replaced. A screwdriver is required to remove and replace the cover. Always perform repairs in a well-ventilated area.This OEM valve cover kit is sourced from the manufacturer. It is sold as a single unit. Screws are not included with the valve cover kit. This valve cover kit is designed for various model MTD, Cub Cadet, Yard Machines, and Troy-Bilt engines.

This camshaft assembly is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. A camshaft assembly is a piece of hardware important to engines. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a tiller, a chipper, a shredder, a log splitter, and a snow blower. It is compatible with products by brands such as MTD, Cub Cadet, Yard Machines, and Troy-Bilt.The camshaft assembly part is very important when it comes to the mechanical operation of an engine. It rotates in conjunction with the crankshaft of the machine. It performs an important service that involves combining air and fuel as they enter cylinders and the gasses released from them.The replacement or repair process of the camshaft assembly should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This is a governor arm shaft found on lawnmowers, chippers, and other engines on lawn and garden equipment. It is a component of the governor assembly maintains a steady speed regardless of how much stress is placed on the engine. The governor arm is connected to the carburetor arm shaft. One end of this arm is connected to the governor spring and the other to the throttle linkage. Speed is increased or decreased based on the amount of push or pull that is placed on the throttle arm. If the governor arm shaft is bent, broken, or damaged, the governor arm will not be able to maintain its speed. The engine may appear to be stuck in high speed or it won't accelerate at all.Remove the carburetor to access the governor assembly. Disconnect the governor spring and take the linkage off the governor arm. Remove the governor arm from the arm shaft and then remove the broken governor arm shaft. Install the new shaft and reassemble the governor. Reinstall the carburetor. The governor arm shaft is made from heavy-duty metal and is sold as an individual unit. It is compatible with snowblowers, lawnmowers, chippers, and other small engines manufactured by MTD, Craftsman, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, and Husky.

Pistons are essential for proper engine function. When expanding gases push the piston, it turns the crankshaft. When the piston compressed the fuel-air mixture, the spark ignites and causes combustion. If the pistons are going bad, owners might notice white or gray exhaust smoke, low power when accelerating, loss of performance, or excessive oil consumption.Pistons may need to be replaced for any number of reasons. They could have damage to their crown, which could be caused by overheating. There could be impaction marks if they were not installed correctly or if the valve timing is incorrect. The pistons could be fused or have elements that have melted, or there could be cracks in the piston. Any of these issues would necessitate a replacement.This piston is used for select small engines from MTD, Troy-Bilt, Yard Machines, Columbia, and Cub Cadet. Each piston is sold individually and is a genuine OEM part sourced from the manufacturer. Those who need to replace more than one piston will need to buy them separately.

The flywheel is an engine component that attaches to a rotating shaft which helps to provide smooth power delivery from the motor to the machine. Some of the signs of a bad flywheel include strange noises when the motor starts, grabbing when the clutch engages, vibrations, and a burning smell.The flywheel is made from durable metal, but it could still need to be replaced in time. It could be damaged from debris, or it could simply be worn out from use over the years. If there is an issue with the flywheel, it should be replaced it before it causes more problems with their engines and the capabilities of their machines.This flywheel is for use with certain engine models from MTD, Troy-Bilt, Yard Machines, Craftsman, Columbia, and Cub Cadet. Each of the flywheels is made from quality materials and is sold individually. It is a genuine OEM replacement part sourced from the manufacturer.