Need Help?
Call
Replacement upper rack adjuster kit for dishwashers. Includes left and right side adjusters with rollers. Needed when original adjusters crack or break.
The repair kit has everything needed for both sides of the rack but there were no instructions so it took me some time to figure out how it all mounted on the basket. The original design was totally different than the repair kit so it would have been very beneficial to have at least a diagram that showed how everything fit together. That being said, once I figured out how all the parts fit, then it was a very easy repair. You won't reuse any of the old parts except for the end caps that snap... Read more
Replacement upper rack adjuster for dishwashers. Mounts to the upper rack to adjust height and provide flexible loading. Replace if cracked or broken.
I bumped into my KitchenAid dishwasher and the upper rack adjuster cracked. There was already a crack on the notch of the housing where the handle (lever) sits. In addition, the positioner popped out and I couldn't find it. So, I bought the three parts from AppliancePartsPros online. It arrived in about a week. The repair was fairly simple, but it still took about 45 minutes because I didn't want to crack the assemblies. For the housing, use a small slotted screwdriver to carefully... Read more
Replaces cracked, broken, or missing dishwasher rack stop clips. Secures upper or lower dishrack to track rail, preventing rack from sliding out too far.
My discharge would not empty after a wash cycle and I always had gross gray water left in the bottom approx 3" deep? After doing the obvious things of checking the simp for garbage, and checking that the discharge hose wasn't blocked, I removed my discharge pump ( not too hard to do) and tested. My pump which did run and turn the impeller. However, the pump evidently had weakened with time and weakened and could no longer pump the waste water up hill to the "T" connection under the sink. A... Read more
Restore safe, organized loading on the top level. Replacing a damaged upper rack brings back smooth sliding, proper item placement, and dependable use without snagging or collapsed tines.
What it does
What’s included One upper rack assembly.
Install notes
We had to order new racks by calling appliance parts pros. I gave them the model and serial number to order replacement racks with new hardware included. The racks came in 5 business days and I installed the new racks which were OEM. Fit perfect and the dishwasher runs like new. It was that easy. Read more
Bring back smooth loading on the bottom level. This lower dishrack replaces bent or rusty racks so dishes sit securely and the rack glides cleanly without snagging or collapse.
What’s included One lower rack assembly.
Replaces broken or worn dishwasher upper rack adjuster assembly. Includes wheels and mounting hardware for smooth rack adjustment and gliding action.
I replaced the adjusters on both sides (since two rollers broke off on one and one broke off on the other). Replacement was easy, just remember to keep the clips from the original adjusters. Take the clips off, remove the adjuster, replace with the new adjuster, and replace the clips. The new adjuster comes with the rollers already attached so no need to keep the ones from when plastic axle broke on the original adjusters. Read more
Lower dishrack assembly for dishwashers. Holds dishes, pots, and pans during wash cycles. Replace if rusted, cracked, warped, or damaged. Includes wheels.
We ordered a replacement Lower Dishrack KIt which arrived in a very timely manner. I was surprised to see the order included a utensil rack as ours was fine and we had not ordered one. After installing the dishrack, we discovered the old rack was obsolete. It was so nice to realize GE was on top of things in sending the replacement utensil rack instead of me having to order one after the fact. Read more
Secures the dishwasher rack to prevent it from rolling out too far. Replace this clip if it's cracked, broken, or missing to keep your rack stable.
Replaced wheel assembly because prongs were broken and replaced track because wheel assemblies were rolling out from the track when extended. Read more
Replacement dishwasher rack assembly that holds dishes during wash cycles. Needed when original rack is rusted, cracked, or wire coating is worn.
To say using Appliance Parts Pros made things as simple as it gets, is an understatement. I was able to order the parts simply by using their website and having my dishwasher make and model number. Images of the parts make confirming the order even better. They have an on line question/answer cue if needed and even offer a call in for advice number. Once the order arrived, I verified the parts and began installation. Take a few pictures of the appliance from different angles before you start.... Read more
This is the upper dishrack assembly for a dishwasher, providing the sliding rack where cups, glasses, and smaller items are loaded for washing. It includes the rack frame and tine rows that hold dishes in place during the wash cycle. Replace this assembly if the rack is rusted, has broken or bent tines, or if the rollers no longer glide smoothly on the tracks.
The Tine Row Pivot is an OEM replacement part for Whirlpool dishwashers. This component is an integral part of the upper rack assembly, allowing the tine rows to fold down or pivot inward to accommodate taller items or create additional space within the rack.
Symptoms of a faulty tine row pivot may include:
Causes of needing to replace the tine row pivot can include normal wear and tear over time, physical damage from mishandling or impact, or issues with the pivot mechanism becoming corroded or obstructed.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.
Ordered a new one. It took about 10 seconds to install. Now it’s like brand new. Read more
Replacement silverware basket for dishwashers. Holds and organizes utensils during wash cycles. Replace if cracked, broken, or mesh bottom damaged.
By replacing it with a new dishwasher silverware basket Read more
Clips onto the upper dishrack to hold the height adjuster assembly in place for balanced operation. Replace if cracked, broken, or missing.
Left-hand track assembly guides and supports your dishwasher's upper rack as it slides. Replace if cracked, broken, or ball bearings have fallen out.
Ordered numerous replacement parts. Started with the tracks which required pulling the washer out of the cabinet to reach the screws. Pushed it back in and re-secured. Then stared on the rack and replaced the rack adjusters and various clips. Everything is straight forward and easy to replace. I originally called a local repair place to have them repair it. They came out and said they needed to order parts and they would call back. A week went by and I followed up with them. Had to leave... Read more
Right-hand track assembly that guides the upper dishwasher rack as it slides in and out. Replace if cracked, broken, or ball bearings fall out.
Replaced the rack. Had to take some of the old parts that were still good and snap them into place.. pretty easy. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.