Parts for Bosch NEM935 UC: 01 - Complete Parts

This is a 10 gauge black wire assembly used for internal power connections in appliances. It replaces damaged or worn wiring to restore a secure electrical path and help prevent intermittent power or safety issues. What it does:

• Provides a single, heavy-gauge conductor for high-current circuits inside the appliance
• Connects power between terminals, switches, and components where a 10 ga lead is required
• A damaged or frayed wire can cause loss of power, intermittent operation, or arcing; replacing it restores proper connectivity
• Matches OEM routing and connector style when specified as a complete assembly

• Disconnect power (unplug or turn off breaker) before inspecting or replacing wiring
• Replace wiring using the original routing and secure with the same clips/fasteners to prevent abrasion
• Verify connectors are fully seated and terminals are clean; do not use damaged connectors
• If splicing is required, use approved crimps/heat-shrink and follow local electrical codes

This is a 10 gauge red complete wire assembly used for power connections in compatible appliances. It replaces a damaged or worn wire to restore a safe, routed electrical path. What it does

• Carries high-current power where a 10 gauge conductor is required
• Replaces frayed, cut, or heat-damaged red power wiring
• Helps stop intermittent power loss or no-power symptoms related to a broken lead
• Preserves proper routing and insulation to reduce short or grounding risks

• Disconnect power at the breaker before inspecting or replacing wiring
• Verify correct routing and secure terminal connections; use proper crimping or terminal fasteners
• Inspect nearby insulation and components for heat or abrasion damage and replace as needed

Anti-short bushing for wall ovens and electric cooktops. Insulates electrical components to prevent shorts. Replace if cracked, damaged, or missing.

Secures your cooktop to the countertop from below. Includes brackets and hardware. Replace if worn, deformed, or screws are damaged or missing.

Razor blade with cooktop cleaner

90-degree connector cable for ovens and cooktops. Replaces damaged, frayed, or missing connectors. Essential for secure electrical connections.

If your cooktop burner won't heat or heats unevenly, a faulty heating element is often the cause. This replacement part restores proper cooking performance.

This heating element warms the appliance tub to heat water and aid in drying and sanitizing cycles. It restores normal wash and dry performance when the original heater has failed or stopped producing heat. What it does:

• Heats water and air inside the appliance to reach cycle temperatures
• Helps improve detergent activation and soil removal during wash cycles
• Supports drying and sanitizing functions by providing consistent heat
• Failure symptoms: no hot water, poor drying, longer-than-normal cycles, or error codes related to heating

• Disconnect power (and water, if applicable) before starting any repairs
• Handle carefully; avoid bending or damaging terminals and mounting tabs
• Inspect wiring and connectors; replace any corroded or damaged harnesses

Cooktop not heating or heating unevenly? This heating element restores proper cooking temperature. Common repair for electric cooktops with moderate difficulty.

Burner not heating or taking too long to boil water? This heating element assembly restores proper temperature output. Common fix for cooktops and ranges.

This stainless steel cooktop control knob replaces a worn or damaged selector on electric Bosch cooktops, restoring a solid grip and accurate temperature control. Designed to match factory fit and appearance for a clean, functional finish. What it does:

• Replaces a damaged, faded, or loose control knob so you can safely select burner settings
• Provides a clear tactile stop for reliable temperature selection
• Restores the original appearance of the cooktop surface
• Helps prevent accidental knob movement caused by worn parts

• Turn power to the appliance off at the breaker before servicing to avoid electrical hazard.
• Pull off the old knob straight away from the shaft; align the new knob with the shaft and press on until fully seated.
• If the knob does not fit, verify shaft type and part number before forcing.

Secures your cooktop to the countertop from below. Includes brackets and hardware. Replace if worn, deformed, or screws are damaged or missing.

Razor blade with cooktop cleaner

This rough-in box provides a protected mounting and connection point for a 36-inch appliance installation, keeping water, drain and electrical rough plumbing accessible and organized behind the wall. It simplifies final appliance hookup and service access. What it does:

• Houses supply lines, drain and wiring for a 36" appliance opening to keep connections tidy and reachable
• Protects rough plumbing and electrical during wall finishing and installation
• Helps prevent accidental damage to lines while installing or servicing the appliance
• Commonly used when replacing or installing a new built-in appliance that requires a recessed connection box

• One rough-in box (36 in.) as specified

• Install in wall framing per local codes and manufacturer rough-in dimensions before drywall or cabinet installation
• Secure to studs and route supply, drain and wiring per appliance installation instructions
• Do not exceed intended use — match box type and depth to appliance requirements

Replacement mounting screw for cooktop panels and brackets. Secures loose components, restores proper fit, and prevents rattling. Direct fit fastener.

Mounting screw secures cooktop components and panels. Replace if missing, stripped, or corroded. Essential hardware for proper assembly and stability.

Replace your cooktop's infinite switch if burners won't heat properly, stay on constantly, or cycle incorrectly. Controls dual heating elements.

This leaf spring provides hinge tension to help a dishwasher door open and close smoothly and hold position. It restores proper door balance for safer, more controlled operation when the original spring is worn or broken. What it does:

• Supplies tension at the door hinge to prevent the door from dropping or slamming
• Helps the door open and close evenly and remain in the desired position
• Common symptom: door feels loose, won't stay open, or closes too quickly
• Works as part of the hinge assembly to maintain alignment during operation

• Disconnect power to the appliance before beginning any repair
• Handle springs and hinges carefully — they can be under tension and may require release tools
• Follow the manufacturer service manual or wiring diagram for correct disassembly and reassembly