Parts for Gaggenau AH250-760: 01 - Complete Parts

This stud bolt is a threaded fastener used in the assembly of a range hood or ventilation unit. It provides a secure mounting point for internal components or ductwork connections. Replace this stud if the threads are stripped, the bolt is bent or corroded, or if a component it secures has become loose or detached.

This is a threaded stud bolt used as a fastener in the appliance assembly, providing a secure mounting point for panels, brackets, or other components. It threads into the appliance frame and allows parts to be bolted firmly in place. Replace this stud if the threads are stripped, the bolt is bent, or if it has broken off, preventing proper attachment of the connected component.

This is a threaded stud bolt used to secure components within the appliance assembly. It provides a mounting point for attaching panels, brackets, or other structural parts. Replace this stud if the threads are stripped, the bolt is broken, or if the component it secures has become loose or detached.

This terminal connector provides a secure electrical connection for appliance wiring, replacing a worn or damaged spade-style terminal to restore reliable power flow. It fits into the appliance's existing terminal block for a lasting repair. What it does:

• Replaces a damaged or corroded spade terminal to re-establish a solid electrical connection
• Helps eliminate intermittent power, arcing, or overheating at the wiring junction
• Works where a right-angle terminal is required to connect a wire to the appliance terminal block
• Compatible with standard insulated or non-insulated spade-style wire terminations

• Disconnect power at the circuit breaker or unplug the appliance before inspecting or replacing terminals
• Verify terminal orientation and fully seat the connector on the mating spade to ensure a tight fit
• Use proper crimping or soldering techniques if attaching bare wire; avoid loose or exposed conductors

This terminal connector provides a secure electrical connection for appliance wiring, replacing a worn or damaged spade-style terminal to restore reliable power flow. It fits into the appliance's existing terminal block for a lasting repair. What it does:

• Replaces a damaged or corroded spade terminal to re-establish a solid electrical connection
• Helps eliminate intermittent power, arcing, or overheating at the wiring junction
• Works where a right-angle terminal is required to connect a wire to the appliance terminal block
• Compatible with standard insulated or non-insulated spade-style wire terminations

• Disconnect power at the circuit breaker or unplug the appliance before inspecting or replacing terminals
• Verify terminal orientation and fully seat the connector on the mating spade to ensure a tight fit
• Use proper crimping or soldering techniques if attaching bare wire; avoid loose or exposed conductors

This is a set of nuts used to secure a fixing bracket on compatible Bosch appliances, providing a stable connection and restoring proper bracket alignment. Ideal when existing fasteners are missing, worn, or loose. What it does:

• Secures a mounting/fixing bracket to the appliance chassis or assembly
• Restores bracket stability to reduce rattling, movement, or misalignment
• Replaces missing or corroded nuts to ensure proper fit and function

• Disconnect power and water before servicing the appliance
• Use the correct-size wrench or socket to avoid rounding the nut heads
• Thread nuts by hand first, then tighten securely; do not overtighten to avoid stripping threads
• If other bracket hardware is worn or damaged, replace those parts as well for a reliable repair

This guide component directs and supports valve movement within a range hood or ventilation system. It ensures the valve opens and closes smoothly to control airflow through the vent. Replace this guide if the valve sticks, moves unevenly, makes excessive noise, or if the original guide is cracked or worn.

This replacement standard odor filter uses activated carbon to help reduce common refrigerator smells for fresher-smelling food storage. Designed as a direct-fit consumable for refrigerators with a removable carbon filter cartridge. What it does:

• Adsorbs and reduces everyday food and household odors in the fresh-food compartment
• Helps prevent odor transfer between foods so flavors stay truer
• Works as part of the refrigerator's air circulation system to maintain a neutral-smelling interior
• Commonly replaced when you notice persistent or recurring odors despite cleaning

• Install in the refrigerator's designated filter slot per your model's instructions; ensure correct orientation
• Replace periodically or when odors persist; follow OEM replacement interval if available
• Disconnect power or follow the manufacturer's safety guidance if access requires panel removal
• Dispose of used filter according to local regulations for household waste

This part is the grease filter made to trap the grease from the exhaust air on an range hood. It is made out of metal mesh. It is important that this component is clean and clear for the range hood to operate at optimal levels. This product contains two filters.If the filter becomes clogged and cannot be cleaned with soap and water, then this will be a high-quality replacement part. Over time, the filter becomes dirt due to its function. If it begins to stink or become unsightly, the owner may wish to replace it. Doing so can often improve the overall performance of the oven hood.This particular set of grease filters is compatible with range hoods that have been manufactured by the Bosch and Maytag brands. This set is sold individually. It is sourced straight from the manufacturer as a genuine OEM part.

Metal mesh filter captures grease and particles from cooking vapors. Replace when damaged or heavily soiled. Verify fit using your model number.

This is a replacement tension spring for AH 250/900 assemblies. It restores proper tension in the original mechanism so moving parts operate smoothly and reliably. What it does

• Provides tension for the AH 250/900 assembly so doors/closures move and return as designed
• Replaces a stretched, broken, or weak spring that can cause sagging or improper alignment
• Helps stop rattling or uneven movement caused by a failed spring
• Restores the original fit and function of the related hinge or mechanism

• Designed to install in the original spring location; confirm orientation before removing the old spring
• Use appropriate tools and take care to avoid pinching—springs can release tension suddenly
• Disconnect power or follow appliance-specific safety steps if working near electrical components

This is a valve guide component that helps direct and stabilize a valve within the appliance assembly. It ensures proper valve alignment and smooth operation during use. Replace this part if the valve is sticking, misaligned, or not seating correctly.

This facia panel is the outer trim for the appliance's control area, restoring the finished look and protecting the underlying control components. It gives a clean appearance and helps keep controls secure and covered. What it does:

• Replaces a cracked, dented, scratched, warped, or otherwise damaged control-area facia
• Covers and protects the control components from spills, splashes and everyday wear
• Restores the appliance's finished front appearance and support for buttons/labels
• Helps prevent accidental button activation by keeping controls enclosed

• One facia panel as shown

• Disconnect power to the appliance before starting any work
• Installation typically requires removing trim/door screws and carefully prying off the old facia; keep screws and fasteners for reuse if undamaged
• Handle the new facia gently to avoid scratching the finished surface during installation
• Refer to your model-specific service manual for exact removal and reassembly steps

The range vent hood switch case houses the control switches for fan speed and lighting, located on the front of the hood. Replace when switches stick, don't click properly, or fan speeds and lights don't respond to switch positions.

This insulating strip (AH 250/900) is a replacement insulation piece that helps protect and separate appliance components from heat and abrasion. Restores proper clearance and helps reduce heat transfer and noise where installed. What it does:

• Provides thermal and physical separation between adjacent components to help prevent heat damage.
• Helps reduce heat transfer and localized hot spots that can affect nearby parts.
• Cushions and protects edges to reduce wear, chafing, and vibration noise.
• Common symptom: missing, torn, burned or dislodged insulation visible during inspection.

• One insulating strip (AH 250/900).

• Follow your appliance service manual for exact location and routing; replace like-for-like.
• Disconnect power (and gas if applicable) before accessing internal components.
• Use appropriate tools and wear gloves; avoid compressing the strip excessively during installation.
• If mounting surfaces are damaged or other insulation is compromised, inspect surrounding parts and replace as needed.

This insulating strip prevents unwanted heat transfer and cushions internal components to help reduce noise and wear. It restores proper thermal spacing for safe, efficient appliance operation. What it does:

• Provides thermal insulation between heat-generating parts and surrounding panels
• Cushions and separates components to reduce vibration and rubbing noise
• Helps prevent heat-related damage to wiring or nearby plastic parts
• Missing or damaged strip can cause increased cabinet heat, noise, or premature component wear

• One insulating strip

• Disconnect power and allow the appliance to cool before servicing
• Handle part carefully to avoid tearing; use appropriate tools to remove fasteners or clips
• Verify proper orientation and full seating before restoring power

This is a decorative panel designed to mount on the front or bottom of a range vent hood, providing a finished appearance that matches your kitchen cabinetry. It covers the internal components and rail assembly of the hood. Replace this panel if it is cracked, discolored, warped, or damaged from heat and grease exposure.

This incandescent bulb cover protects the oven light bulb and helps keep the bulb clear of food debris while letting light into the oven cavity. It's a simple replacement to restore proper interior lighting and protection. What it does:

• Shields the incandescent oven light from splatter and direct contact
• Helps maintain clear, unobstructed interior lighting
• Replaces cracked, chipped or missing covers that expose the bulb
• Restores a safety barrier between the lamp and the oven cavity

• Disconnect power to the appliance and allow the oven to fully cool before servicing
• Use gloves or a cloth to avoid cuts from broken glass and to keep the cover clean
• Remove retainers or screws as needed, replace cover, then reinstall retainers securely

This is a front glass panel designed for a range vent hood. It serves as both a decorative cover and a protective window that allows light from the hood lamp to pass through. Replace this panel if it is cracked, chipped, or broken, or if it no longer fits securely in the hood frame.

This is a replacement fluorescent lamp starter designed for use with 80W, 240V fixtures. It helps the lamp reach full brightness reliably so lighting cycles start and run normally. What it does:

• Provides the initial pulse to ignite fluorescent tubes in compatible fixtures
• Commonly restores lamps that fail to start or take multiple strikes to light
• Can stop or reduce continuous flickering or rapid flashing at startup
• Works with starter-type ballasts specified for 80W / 240V operation

• Disconnect power to the fixture before servicing to avoid shock
• Typically replaces a plug-in starter in the fixture's starter holder—pull old starter straight out and push the new starter into place
• Confirm fixture voltage and lamp wattage match the starter specifications before installing

This is a 15-watt fluorescent light bulb designed for use in a range vent hood. It provides illumination over the cooktop surface during cooking. Replace this bulb if the hood light has stopped working, flickers, or appears dim.

Fluorescent light socket that connects bulb to fixture wiring. Replace if cracked, melted, or unable to hold bulb securely. Direct fit component.

This left-side end cap is a cosmetic and protective replacement part that restores the finished edge and secure fit on the appliance. It helps cover and protect the end of the console/trim while improving appearance. What it does:

• Replaces a cracked, broken or missing left end cap to restore a secure fit and finished look
• Protects underlying components and edges from dirt, moisture and incidental contact
• Prevents snagging or exposed sharp edges on the appliance front or console
• Matches the OEM shape for correct alignment and mounting

• Disconnect power to the appliance before beginning any work
• Basic hand tools may be required to remove trim clips or screws; handle plastic parts carefully to avoid damage
• Confirm orientation (left side) and test fit before final fastening

This right-side end cap restores the finished edge and secure fit where a track or rail terminates, preventing sharp edges and keeping components aligned for smooth operation. It's a simple replacement to restore original function. What it does:

• Covers and protects the exposed end of a rail or track to prevent snags and wear
• Helps hold the rail or component in correct alignment for reliable movement
• Replaces cracked, broken, or missing end caps that cause rattling or loose rails
• Reduces sharp edges that can catch or damage dishes, clothing, or hands

• One right-side end cap

• Remove power and water to the appliance before servicing
• Use basic hand tools or pry tool to remove the old cap and press or snap the new cap into place
• Inspect adjacent rails, clips, and wheels and replace any damaged parts for best results
• Wear gloves and eye protection to avoid injury from sharp edges or debris

This replacement lamp wire harness connects the appliance light to the power supply, restoring reliable interior illumination and a secure electrical connection. It's a direct-fit wiring assembly used where the lamp circuit needs repair or replacement. What it does:

• Routes power to the interior lamp and secures the lamp connection
• Replaces damaged, burnt, or frayed lamp wiring that can cause intermittent or non-working lights
• Restores a safe, stable electrical path for consistent illumination
• Helps prevent loose connections that can lead to flickering or failure

• Disconnect power to the appliance before beginning work to avoid shock or injury
• Remove panels or trim as required to access the existing lamp harness and connectors
• Match connector style and routing; secure harness with existing clips or fasteners to prevent chafing

This terminal connector provides a secure electrical connection for appliance wiring, replacing a worn or damaged spade-style terminal to restore reliable power flow. It fits into the appliance's existing terminal block for a lasting repair. What it does:

• Replaces a damaged or corroded spade terminal to re-establish a solid electrical connection
• Helps eliminate intermittent power, arcing, or overheating at the wiring junction
• Works where a right-angle terminal is required to connect a wire to the appliance terminal block
• Compatible with standard insulated or non-insulated spade-style wire terminations

• Disconnect power at the circuit breaker or unplug the appliance before inspecting or replacing terminals
• Verify terminal orientation and fully seat the connector on the mating spade to ensure a tight fit
• Use proper crimping or soldering techniques if attaching bare wire; avoid loose or exposed conductors

This terminal connector provides a secure electrical connection for appliance wiring, replacing a worn or damaged spade-style terminal to restore reliable power flow. It fits into the appliance's existing terminal block for a lasting repair. What it does:

• Replaces a damaged or corroded spade terminal to re-establish a solid electrical connection
• Helps eliminate intermittent power, arcing, or overheating at the wiring junction
• Works where a right-angle terminal is required to connect a wire to the appliance terminal block
• Compatible with standard insulated or non-insulated spade-style wire terminations

• Disconnect power at the circuit breaker or unplug the appliance before inspecting or replacing terminals
• Verify terminal orientation and fully seat the connector on the mating spade to ensure a tight fit
• Use proper crimping or soldering techniques if attaching bare wire; avoid loose or exposed conductors