Parts for Gaggenau VC113-602: 01 - Complete Parts

This M3.5 x 6.5 machine screw secures small panels and components in compatible Bosch appliances, restoring proper fit and reducing vibration or movement. Use it to replace missing or damaged fasteners for a secure repair. What it does

• Fastens small panels, brackets, and interior components where M3.5 x 6.5 screws are specified
• Restores secure mounting to eliminate rattling or loose parts
• Replaces stripped, rusted, or missing screws that prevent proper assembly

• Disconnect power and unplug the appliance before starting any repair
• Use the correct size driver to avoid cam-out or head damage
• Tighten until snug; do not overtighten to prevent stripping or cracking nearby parts
• Keep removed hardware organized so you can match original locations during reassembly

This part has been discontinued by the manufacturer and is no longer available.

This small rubber gasket seals and cushions an M4 fastener to help prevent leaks and reduce vibration at attachment points. It's a compact replacement part used where a watertight or vibration-damping seal is needed. What it does:

• Creates a seal around an M4 screw or bolt to help prevent water intrusion
• Cushions fasteners to reduce vibration, noise, and metal-on-metal wear
• Restores a tightened fastener's proper sealing surface when the original gasket is worn
• Helps maintain appliance integrity around panels, brackets, or connections

• Power off and unplug the appliance before starting any repair.
• Confirm the gasket's size matches the fastener and seating area before installation.
• Install flat against the mating surface; tighten fastener snugly but avoid over-torquing which can deform the gasket.
• Handle small parts carefully and retain any removed hardware for reassembly.

Replacement energy regulator that helps control power delivery to the appliance's heating and control circuits, restoring stable performance and addressing power-related faults. Installs in-line with the factory wiring to replace a failed regulator. What it does:

• Regulates power to heating and control components to maintain expected operation.
• Can resolve symptoms such as inconsistent heating, intermittent operation, or unexpected shutdowns.
• Prevents erratic behavior caused by a failing power-control component.
• Works as a direct replacement for the factory energy regulator to restore proper function.

• Disconnect all power before beginning service to avoid shock or injury.
• Use basic hand tools; inspect wiring and connectors for damage and replace any compromised parts.
• Refer to the appliance service manual or OEM instructions for specific removal and installation steps.

This replacement tension spring restores proper movement and tension for the related mechanism in compatible Bosch appliances, helping components open, close, or return smoothly and reliably. What it does

• Provides restoring force for a moving component, helping ensure controlled motion and positioning
• Can correct symptoms like loose or uneven movement, sagging panels, or components that don't return to position
• Works as the original-style spring used by the manufacturer for the specified mechanism
• Intended as a direct replacement for the worn or broken spring

• One replacement tension spring

• Inspect the mating parts and attachment points before installing; replace any damaged clips or anchors
• Use appropriate hand tools and keep hands/eyes protected — springs can release stored energy
• Follow the appliance's service manual instructions for safe removal and installation; disconnect power where applicable

This supporting sheet is a stamped metal support panel that reinforces and stabilizes the appliance chassis where installed, helping keep internal components aligned for reliable operation. What it does

• Provides structural support to the appliance cabinet or internal assembly
• Helps stabilize mounted components and prevents movement or sagging
• Reduces vibration and rattling caused by loose or damaged support areas
• Can prevent misalignment that affect door seals or adjacent parts

• One supporting sheet

• Designed to mount using existing factory fasteners; inspect screws and clips and replace if damaged
• Turn off power to the appliance and disconnect power before beginning any repairs
• Handle edges carefully; metal panels may have sharp edges — wear gloves and eye protection

This wire harness connects appliance control and motor circuits to restore reliable power and signal routing. It replaces a damaged or worn harness to help eliminate intermittent operation and loss of control. What it does:

• Routes electrical power and control signals between modules and components
• Replaces frayed, pinched, or broken wiring that can cause intermittent power or failures
• Helps restore proper function when controls, lights, or motor run inconsistently
• Keeps connectors organized and secured to prevent shorts or loose connections

• Disconnect all power before starting any repair to avoid shock or injury
• Handle connectors by the housings; avoid pulling on wires or bending pins
• Route and secure the harness following original clips and channels to prevent rubbing or heat exposure

This wire harness assembly connects electrical components to restore reliable power and signal routing. It replaces a damaged or worn harness to help stop intermittent power, loss of motor function, or other wiring-related faults. What it does:

• Routes power and signal between control components and the motor or sensors
• Replaces frayed, burned, or broken wiring that can cause intermittent operation
• Restores secure connector contacts to eliminate poor or no-power symptoms
• Helps prevent shorts and arcing from damaged insulation or exposed conductors

• Disconnect all power before beginning work to avoid shock or damage
• Compare connectors and routing to the original harness before installation
• Secure harness away from heat sources and moving parts to prevent chafing

A replacement control knob that restores user control for range/oven cooktops. Fits the listed Bosch control shafts to provide a solid grip and clear position feedback when the original knob is cracked, loose, or missing. What it does:

• Replaces a worn, cracked, or missing control knob so you can safely set heat levels and oven functions.
• Provides a secure fit on the control shaft for reliable on/off and temperature selection.
• Restores clear tactile and visual detents for accurate setting changes.
• Helps stop slipping or spinning knobs that prevent proper control.

• Disconnect power (or turn off gas supply for gas ranges) before replacing knobs.
• Most knobs pull straight off the shaft; gently pull while wiggling if needed. Do not force.
• If a retaining screw is present, loosen it first; keep hardware for reassembly.
• If the new knob does not fit, stop and verify shaft style and part number before forcing.

This glass scraper is a handheld tool designed to remove stubborn, baked-on residue from smooth cooktop glass and ceramic surfaces, helping restore a clean cooking surface without harsh scouring. What it does:

• Scrapes away burnt-on food, dried spills and adhesive residue that regular cleaning can't remove
• Helps maintain an even, smooth glass-ceramic cooktop surface for better cleaning and appearance
• Useful for spot-cleaning without abrasive pads that can scratch finishes
• Works as a prep tool before routine cleaning to speed up maintenance

• Use only on cool, unheated cooktop surfaces to avoid damage and injury
• Hold the scraper at a low angle and use light, controlled strokes; avoid excessive force
• Replace blades or blade inserts as needed — handle blades carefully and dispose of used blades safely
• Keep out of reach of children and store with blade covered or retracted when not in use