Parts for Gaggenau VF332-610: 01 - Complete Parts

M4 rubber gasket creates watertight seal and reduces vibration around fasteners. Replace when worn, cracked, or leaking. Verify fit with your model number.

Replacement name plate for your appliance. Installs on the exterior to display model information. Needed when original plate is damaged, faded, or missing.

Headless screw (M3 x 4mm) for securing internal components in appliances. Replace if missing, stripped, or damaged during repairs or maintenance.

This terminal connector provides a secure electrical connection for appliance wiring, replacing a worn or damaged spade-style terminal to restore reliable power flow. It fits into the appliance's existing terminal block for a lasting repair. What it does:

• Replaces a damaged or corroded spade terminal to re-establish a solid electrical connection
• Helps eliminate intermittent power, arcing, or overheating at the wiring junction
• Works where a right-angle terminal is required to connect a wire to the appliance terminal block
• Compatible with standard insulated or non-insulated spade-style wire terminations

• Disconnect power at the circuit breaker or unplug the appliance before inspecting or replacing terminals
• Verify terminal orientation and fully seat the connector on the mating spade to ensure a tight fit
• Use proper crimping or soldering techniques if attaching bare wire; avoid loose or exposed conductors

This terminal connector provides a secure electrical connection for appliance wiring, replacing a worn or damaged spade-style terminal to restore reliable power flow. It fits into the appliance's existing terminal block for a lasting repair. What it does:

• Replaces a damaged or corroded spade terminal to re-establish a solid electrical connection
• Helps eliminate intermittent power, arcing, or overheating at the wiring junction
• Works where a right-angle terminal is required to connect a wire to the appliance terminal block
• Compatible with standard insulated or non-insulated spade-style wire terminations

• Disconnect power at the circuit breaker or unplug the appliance before inspecting or replacing terminals
• Verify terminal orientation and fully seat the connector on the mating spade to ensure a tight fit
• Use proper crimping or soldering techniques if attaching bare wire; avoid loose or exposed conductors

This terminal connector provides a secure electrical connection for appliance wiring, replacing a worn or damaged spade-style terminal to restore reliable power flow. It fits into the appliance's existing terminal block for a lasting repair. What it does:

• Replaces a damaged or corroded spade terminal to re-establish a solid electrical connection
• Helps eliminate intermittent power, arcing, or overheating at the wiring junction
• Works where a right-angle terminal is required to connect a wire to the appliance terminal block
• Compatible with standard insulated or non-insulated spade-style wire terminations

• Disconnect power at the circuit breaker or unplug the appliance before inspecting or replacing terminals
• Verify terminal orientation and fully seat the connector on the mating spade to ensure a tight fit
• Use proper crimping or soldering techniques if attaching bare wire; avoid loose or exposed conductors

This terminal connector provides a secure electrical connection for appliance wiring, replacing a worn or damaged spade-style terminal to restore reliable power flow. It fits into the appliance's existing terminal block for a lasting repair. What it does:

• Replaces a damaged or corroded spade terminal to re-establish a solid electrical connection
• Helps eliminate intermittent power, arcing, or overheating at the wiring junction
• Works where a right-angle terminal is required to connect a wire to the appliance terminal block
• Compatible with standard insulated or non-insulated spade-style wire terminations

• Disconnect power at the circuit breaker or unplug the appliance before inspecting or replacing terminals
• Verify terminal orientation and fully seat the connector on the mating spade to ensure a tight fit
• Use proper crimping or soldering techniques if attaching bare wire; avoid loose or exposed conductors

This is a metal grid or grate that sits on top of a range burner, providing a stable surface for pots and pans during cooking. It supports cookware directly over the flame or heating element to allow even heat distribution. Replace this part if it is cracked, warped, rusted through, or no longer sits level on the cooktop.

M4 square nut for securing components in appliances. Replace if stripped, corroded, or missing to properly fasten panels and parts during assembly.

This VG 352 hinge secures and guides an appliance door for smooth opening and reliable closure, restoring proper alignment and operation. Designed to match the OEM fit and function for straightforward replacement. What it does

• Provides a secure pivot point so the door opens and closes smoothly
• Restores proper door alignment and helps eliminate sagging or uneven gaps
• Helps ensure the door seals correctly to improve performance
• Reduces rattling or sticking caused by worn or damaged hinges

• One VG 352 hinge (single hinge as shown)

• Basic mechanical skills and common hand tools required
• Disconnect power (and water supply for dishwashers) before servicing
• Keep track of screws and any trim; reinstall in the original orientation

This replacement sieve is a small mesh screen that traps debris and particles to protect internal components and help maintain normal flow and performance. It restores proper filtering where the original sieve is worn or clogged. What it does:

• Filters grit, food particles, and debris to prevent blockages in fluid or airflow paths
• Helps maintain consistent flow and operation by keeping downstream parts clear
• Common symptom: reduced flow or slow operation when the sieve is clogged
• Common symptom: unusual noises or strain from downstream components working harder

• One replacement sieve

• Disconnect power and/or water supply before attempting service
• Remove the old sieve carefully; inspect surrounding seals and housing for damage
• Install the new sieve in the same orientation; ensure a secure, seated fit
• If any gaskets or retainers were damaged, replace them before returning the appliance to service

This is a slide rail that supports and guides a drawer in and out of a range or oven. It mounts inside the cavity where the storage or warming drawer sits, allowing smooth opening and closing. Replace this part if the drawer sticks, wobbles, does not glide smoothly, or falls off its track.

This small spring fits behind the control knob to provide tension and a positive, secure feel. Replace it to restore proper knob height and a snug fit when the knob feels loose, wobbly, or won't stay seated.

• Provides spring tension between the knob and control shaft for proper engagement
• Helps keep the knob centered and at the correct height on the control panel
• Restores firm, consistent knob feel during operation
• Common symptoms: loose or wobbly knob, knob doesn't stay seated or sits unevenly

• Disconnect power; for gas appliances, also shut off the gas supply
• Pull the knob straight off the shaft; note the spring's position/orientation
• Remove the old spring and seat the new spring on the shaft or in the knob recess
• Reinstall the knob and check for smooth operation; do not force the knob onto the shaft