Parts for Whirlpool IBMS1455VS0: 01 - Control Parts

This electronic control board is the appliance's main brain. It manages power and timing for key functions so settings respond correctly and cycles run as designed, helping restore normal operation when the original board fails.

• Directs power to components based on inputs from the controls and sensors
• Coordinates cycle timing and overall operation
• Drives the display and status indicators

• Disconnect power at the breaker or unplug the unit before servicing
• Use anti-static precautions; handle the board by its edges
• Photograph wiring and transfer connectors and any mounting hardware to the new board
• Restore power and run a test cycle/diagnostics per your model's service instructions

This is a control board that is an internal part of many microwaves. It acts as the “brain” of the microwave, which ensures other components heat the appliance, turn it on and off, and otherwise ensure appropriate operations. When a user presses buttons to use the microwave oven, the control board takes the input and decides what the appliance should do next. There are many delicate parts to this component so it can start to malfunction. This may result in a microwave that doesn't turn on or doesn't properly heat.Before replacing this part, make sure it is unplugged. A Phillips screwdriver can be used to remove the screws on the top grill. Pull it down from the top to remove it. Next, unthread the screws holding the control board for the frame and lift the cover up to detach it. Note how the wires are connected before disconnecting them and removing the original control board. Reattach everything to the new part and reassemble the microwave.The control board is an authentic OEM replacement part sold as a single component. It is directly sourced from the manufacturer and made to fit microwaves by Whirlpool and Ikea.

This control knob replaces a worn or broken range/stove control knob so you can easily set burner heat and oven functions. It restores a secure grip and clear position selection for safe, predictable cooking. What it does

• Provides a user-ready grip to turn burner or oven control shafts smoothly
• Restores accurate selection of heat settings when original knob is cracked, loose, or missing
• Fits splined control stems to prevent slipping or wobbling during use
• Helps prevent accidental changes to temperature or burner output

• Align knob splines with the control shaft and press straight on until fully seated
• Do not force; if it won't seat easily, verify shaft type and orientation
• For electrical safety, turn off the appliance or unplug before servicing controls
• If the original mounting or shaft is damaged, replace the damaged component rather than relying on the knob alone

This replacement door release button lets you open the appliance door by engaging the latch mechanism when pressed. Restore smooth, reliable operation if the original button is cracked, missing, or sticks in place.

• Transfers your press to the latch mechanism to release the door
• Common symptoms include a cracked or missing button, a button that sticks or won't spring back, or a door that won't open when the button is pressed
• Helps ensure consistent, one-press door opening
• Direct-fit replacement designed for the original mounting location

• Disconnect power to the appliance before servicing
• Access is typically from behind the front trim or control panel; note screw locations before removal
• Transfer any springs/clips from the original if they are separate parts
• Test button travel and latch operation before reassembly

The Button Holders is an OEM replacement part for Whirlpool microwaves. Located behind the control panel, these holders securely mount each individual function button in place.

Causes of faulty button holders often involve standard wear and tear from repeated button pushes over time. Exposure to surrounding heat and moisture may also weaken adhesive or warp plastic.

Symptoms of bad button holders commonly include:

• Loose, rattling, or unsecured function buttons
• Missing or damaged posts that mount buttons
• Warped holder profiles exposing internal components
• Inability to consistently register button selections

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

This replacement door release button lets you open the appliance door by engaging the latch mechanism when pressed. Restore smooth, reliable operation if the original button is cracked, missing, or sticks in place.

• Transfers your press to the latch mechanism to release the door
• Common symptoms include a cracked or missing button, a button that sticks or won't spring back, or a door that won't open when the button is pressed
• Helps ensure consistent, one-press door opening
• Direct-fit replacement designed for the original mounting location

• Disconnect power to the appliance before servicing
• Access is typically from behind the front trim or control panel; note screw locations before removal
• Transfer any springs/clips from the original if they are separate parts
• Test button travel and latch operation before reassembly

The Button Holders is an OEM replacement part for Whirlpool microwaves. Located behind the control panel, these holders securely mount each individual function button in place.

Causes of faulty button holders often involve standard wear and tear from repeated button pushes over time. Exposure to surrounding heat and moisture may also weaken adhesive or warp plastic.

Symptoms of bad button holders commonly include:

• Loose, rattling, or unsecured function buttons
• Missing or damaged posts that mount buttons
• Warped holder profiles exposing internal components
• Inability to consistently register button selections

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.