Parts for Ge HTM18IBPGRSA: 01 - Freezer Door Parts

The Screw Package is an OEM replacement part for GE refrigerators. It contains a pack of 12 identical screws for miscellaneous securing and assembly needs.

These screws play a supporting role, helping attach shelf tracks, cover panels, door hinges, and other interior parts. By maintaining components securely in place, they help ensure smooth operation and prevent rattling or other noises. 

Symptoms of insufficiently secured parts include:

• Noises heard from loose shelves or door components  
• Detaching handles, hinges, or panels
• Shelves shifting positions or becoming misaligned

Causes of needing replacement screws can include loss, stripping, or wear over time from repeated securement and removal of parts during cleaning or repairs. 

This multipack of GE screws is perfect for minor refrigerator maintenance or to stock up on extras. They are also compatible with replacement hardware from Hotpoint, RCA, and certain Kenmore models. 

The Freezer Door Gasket is an OEM replacement part for GE refrigerators. This gasket forms an insulating seal between the freezer door and the refrigerator housing, preventing warm air and moisture from entering the freezer compartment. A properly functioning door gasket is crucial to maintaining optimal storage conditions inside the freezer.

Symptoms of a bad freezer door gasket include:

• Icy buildup around the freezer door seal area
• Moisture or warm air entering the freezer when the door is closed
• Declining freezer temperatures and inefficient cooling

Causes of a bad gasket can be normal wear over time from continuous door openings and closings, damage sustained from mishandling, or cracking/deterioration due to age.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This left-hand shelf front cap for refrigerator shelves secures the front trim/rail on the shelf's left side. Replace a cracked or missing cap to restore a snug, reliable fit for the front edge trim.

• Secures the front shelf trim/rail on the left side
• Helps prevent the front edge trim from loosening or falling off
• Restores a clean, finished front edge appearance
• Common symptoms: broken or missing cap, front trim won't stay attached, loose or sagging front trim

• Remove items and the shelf; handle glass carefully to avoid breakage
• Release the old cap's locking tabs, then align and snap the new cap into the front trim/rail
• Reinstall the shelf and ensure the front trim is fully seated

This front shelf end cap replaces the right-hand piece that anchors the refrigerator shelf's front trim/rail. A secure cap keeps the front edge supported so the trim stays in place and the shelf remains stable.

• Retains the front shelf trim/rail on the right-hand side
• Supports the shelf's front edge to help prevent sagging
• Replaces a cracked, worn, or missing cap
• Common symptoms: trim won't stay attached, loose or wobbly front edge, visible damage to the cap

• Unplug the refrigerator and remove the shelf before servicing
• Handle glass shelves carefully; support both sides to avoid breakage
• Right-hand is determined when facing the shelf from the front; RH is not interchangeable with LH
• Align tabs/slots with the trim and shelf frame; press or snap fully into place, then reinstall the shelf

This full-width shelf front attaches to a refrigerator shelf or door bin to help keep items from sliding forward and to finish the shelf edge. It restores the barrier that secures bottles and containers on the shelf. What it does:

• Replaces a cracked, chipped, or missing shelf front that lets items fall forward
• Secures items on the shelf or door bin to prevent spills and shifting during door use
• Restores the finished appearance of the shelf edge
• Works with compatible full-width refrigerator shelves and bins as the OEM trim/retainer

• One full-width shelf front

• Typically snaps into place on the shelf/bin; align tabs and press until seated
• No special tools required for most installs; use a soft tool to avoid scratching
• Handle glass shelves carefully and support weight while replacing trim

A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:

• Covers the power inlet opening to protect the plug and inlet from dust and debris.
• Reversible design lets you route the power cord to either side to fit against the wall.
• Helps keep the cord tucked close to the appliance so the unit can sit flush with cabinetry or walls.
• Replace when the door is cracked, broken, missing, or no longer holds the plug securely.

• Always unplug the appliance before starting any repair or inspection.
• May require access to the rear panel; check your owner's manual for disassembly steps.
• Check orientation before finalizing installation to ensure correct left/right cord routing.

The Screw is an OEM replacement part for GE refrigerators. Countless screws are used throughout the refrigerator to securely hold parts in place.

Symptoms of a bad or missing screw can include:

• Rattling or vibration noises coming from inside the appliance 
• Doors or other parts that are no longer properly aligned
• Increased frost or cold air leaks due to compromised seals

Causes may include normal wear and tear over time, accidental damage or loss of a screw during repairs, or improper assembly leaving crucial screws omitted. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.