Parts for Ge HTS18ICSWLBB: 01 - Freezer Door Parts

The Screw Package is an OEM replacement part for GE refrigerators. It contains a pack of 12 identical screws for miscellaneous securing and assembly needs.

These screws play a supporting role, helping attach shelf tracks, cover panels, door hinges, and other interior parts. By maintaining components securely in place, they help ensure smooth operation and prevent rattling or other noises. 

Symptoms of insufficiently secured parts include:

• Noises heard from loose shelves or door components  
• Detaching handles, hinges, or panels
• Shelves shifting positions or becoming misaligned

Causes of needing replacement screws can include loss, stripping, or wear over time from repeated securement and removal of parts during cleaning or repairs. 

This multipack of GE screws is perfect for minor refrigerator maintenance or to stock up on extras. They are also compatible with replacement hardware from Hotpoint, RCA, and certain Kenmore models. 

This freezer door gasket fits around the door to keep cold air in and moisture out. Replacing a worn or damaged gasket restores proper temperature performance and helps prevent frost and condensation around the freezer opening.

• Creates a tight seal between the freezer door and cabinet
• Helps maintain correct freezer temperature and humidity
• Reduces frost/ice buildup and moisture near the door
• Replaces gaskets that are torn, warped, cracked, shrunken, or not sealing
• Common signs: visible gaps, door not closing fully, frost along the liner, longer run times, or a warming freezer

• Disconnect power; unload items from the freezer door before starting
• Seat the gasket lip evenly into the door channel/retainer all the way around
• Warm the gasket with hot water or a hair dryer on low to help it relax and seal—do not overheat
• Close the door and check for uniform contact; allow time for the gasket to conform

The Freezer Door Gasket is an OEM replacement part for GE refrigerators. This gasket forms an insulating seal between the freezer door and the refrigerator housing, preventing warm air and moisture from entering the freezer compartment. A properly functioning door gasket is crucial to maintaining optimal storage conditions inside the freezer.

Symptoms of a bad freezer door gasket include:

• Icy buildup around the freezer door seal area
• Moisture or warm air entering the freezer when the door is closed
• Declining freezer temperatures and inefficient cooling

Causes of a bad gasket can be normal wear over time from continuous door openings and closings, damage sustained from mishandling, or cracking/deterioration due to age.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This push-button plug insulates and seals a control panel push-button, helping keep the button stable and protecting the switch from moisture and debris. Fits where a small plastic button bushing or insulator is needed on the control panel. What it does:

• Provides an insulating bushing for a control panel push-button or switch
• Helps hold the button aligned and reduces wobble or uneven operation
• Shields the switch contacts from moisture and dirt that can cause intermittent operation
• Commonly replaced when the button is loose, damaged, cracked, or missing

• Disconnect power to the appliance before removing the control panel or working near electrical components
• Remove the control panel or trim; use appropriate tools to avoid cracking surrounding plastic
• Install the plug gently; do not force or use excessive heat

This white door corner cap covers and protects the exposed corner of a refrigerator/freezer door, restoring a finished look and preventing further wear. It's a simple cosmetic replacement that keeps the door edge neat and protected. What it does:

• Covers damaged, cracked, or missing door corner for improved appearance
• Protects the door edge from chips, dings, and contact wear
• Hides exposed hardware or rough edges that can catch on clothing
• Helps maintain a consistent door seal area by replacing worn corner trim

• Snap-on replacement; may require gently prying off the old cap with a flat tool
• No wiring or electrical disconnect typically required, but unplug appliance if working near electrical components
• Inspect surrounding trim and hinge for damage while replacing the cap
• If cap does not seat easily, check for obstructions or broken mounting tabs before forcing

The Freezer Door Shelf Bar is an OEM replacement part for GE refrigerators. It securely holds up to three adjustable shelves inside the freezer door for organized food storage.

Causes of a bad shelf bar can include damage from overloading shelves, long-term wear and tear from repeatedly loading and removing items, or improper cleaning techniques.

Symptoms of an issue include:

• Shelves sliding out of place due to a loose or unstable bar
• Unable to install shelves into the freezer door
• The bar bending or sagging excessively over time

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This reversible door plug covers the unused hinge or mounting hole after changing a door swing, restoring a clean appearance and helping keep out dirt and drafts. Simple, color-matched replacement for a neat finish. What it does:

• Covers exposed hinge or mounting holes on the door edge for a finished look
• Helps block dust, pests and drafts from entering through unused openings
• Matches original geometry to sit flush with the door surface
• Designed to work with reversible door installations where a hole is no longer used

• One (1) reversible door plug

• No tools are typically required; press plug into the unused hole until it seats securely
• Confirm correct orientation before installing to ensure a flush fit
• Inspect surrounding sealing surfaces and clean area before installation
• If plug is damaged or does not seat properly, replace with the exact part number

A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:

• Covers the power inlet opening to protect the plug and inlet from dust and debris.
• Reversible design lets you route the power cord to either side to fit against the wall.
• Helps keep the cord tucked close to the appliance so the unit can sit flush with cabinetry or walls.
• Replace when the door is cracked, broken, missing, or no longer holds the plug securely.

• Always unplug the appliance before starting any repair or inspection.
• May require access to the rear panel; check your owner's manual for disassembly steps.
• Check orientation before finalizing installation to ensure correct left/right cord routing.

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

The Screw is an OEM replacement part for GE refrigerators. Countless screws are used throughout the refrigerator to securely hold parts in place.

Symptoms of a bad or missing screw can include:

• Rattling or vibration noises coming from inside the appliance 
• Doors or other parts that are no longer properly aligned
• Increased frost or cold air leaks due to compromised seals

Causes may include normal wear and tear over time, accidental damage or loss of a screw during repairs, or improper assembly leaving crucial screws omitted. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.