Parts for Gaggenau EB295-600: 02 - Cavity, Upper Parts

This oven temperature sensor probe measures internal oven temperature so the control can regulate heating cycles for more consistent cooking results. It replaces a failed probe that no longer reports correct oven temps. What it does:

• Sends live temperature readings to the oven control so heating elements are cycled correctly.
• A failing sensor can cause the oven to not reach temperature, run too hot/too cold, or show temperature-related error codes.
• Restores reliable temperature feedback for more even baking and roasting.
• Plugs into the oven's existing connector and mounts inside the oven cavity.

• Disconnect power at the breaker or unplug the appliance before starting work.
• Allow the oven to cool completely; sensor and surrounding parts may be hot.
• Handle the probe carefully—it's a delicate sensing element; avoid bending or damaging the tip.
• Verify proper operation after installation.

A female door latch that secures the appliance door and ensures a proper close for safe operation. Replaces a worn or broken latch to restore reliable door engagement and help the appliance start normally. What it does:

• Secures the door by engaging the corresponding door striker so the appliance can run
• Helps prevent the door from popping open during operation
• Commonly replaced when the door won't stay closed or the unit displays a "door"/won't-start symptom
• Fits the OEM latch location and mates with the matching male striker to restore proper function

• One female door latch

• Disconnect power (and gas, if applicable) before servicing
• Remove the outer door panel or access panel as required to reach the latch assembly
• Align the latch with the striker and secure fasteners; test door engagement before reassembly

This control panel lens cover protects the oven's display and touchpad area from spills, scratches and everyday wear while keeping the display visible and looking finished. It restores the appliance's appearance and helps prevent damage to the underlying controls. What it does

• Shields the display and control buttons from food splatter, grease and scratches.
• Keeps the display readable by reducing direct contact and surface damage.
• Replaces cracked, chipped or yellowed lens surfaces that obscure the control panel.
• Helps prevent moisture from directly contacting the control electronics when properly seated.

• One lens cover for the control panel.

• Disconnect power to the appliance before starting any work.
• Typically installs by removing the control panel trim or bezel; handle the lens by the edges to avoid fingerprints.
• Inspect mounting tabs or clips for damage and align carefully before snapping or fastening into place.
• If screws or additional trim are required, reuse OEM fasteners.

A flexible replacement gasket that seals and side lamp glass, cushioning and securing the glass to help block moisture and debris from the lamp housing. Restores a tighter fit and reduces vibration or rattling around the lamp area. What it does:

• Seals the edge of the lamp glass to keep moisture, dust and food debris out of the lamp housing.
• Cushions and centers the lamp glass to reduce vibration and prevent rattling or glass movement.
• Helps maintain a stable lamp assembly so the light cover sits flush and stays in place.
• Use when the gasket is cracked, torn, deformed or missing, or when the lamp glass feels loose.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Handle lamp glass carefully to avoid breakage; wear gloves and eye protection as needed.
• Seat the gasket evenly around the lamp glass edge and press into the channel until fully seated; avoid stretching or deforming the seal.
• Replace only with the exact OEM part number to ensure correct fit and sealing.

This convection diffuser panel directs and evens hot-air flow from the oven's convection fan for more uniform cooking and roasting. It includes openings for a rotisserie motor when applicable. What it does:

• Redirects convection airflow for consistent heat distribution across the oven cavity
• Helps reduce hot spots that can cause uneven baking or roasting
• Provides mounting/opening points for a rotisserie motor assembly
• Replaces damaged, bent, or missing diffuser panels that interfere with airflow

• Disconnect power to the appliance before starting any repair
• Installation typically requires removing oven interior panels or back access; keep fasteners and brackets for reassembly
• Handle edges carefully; metal panels may have sharp edges
• If rotisserie motor is used, verify alignment of motor shaft with diffuser openings during reassembly

This temperature limiter is a safety thermostat that stops heat when temperatures exceed safe limits, protecting the appliance from overheating and potential damage. It's a direct-fit replacement designed for the original thermal cutoff function. What it does:

• Monitors heater temperature and opens circuit if the unit overheats
• Prevents continuous heating that can cause component damage or fire risk
• Common failure symptoms: appliance won't heat, intermittent heating, or tripped thermal safety
• Works as part of the heating/temperature-control safety chain

• Disconnect power (and gas if applicable) before access and replacement
• Located near the heating element or blower housing; follow your model's service manual for access
• Inspect wiring and adjacent components for heat damage; replace damaged parts as needed