Parts for Electrolux FFHT2022AS3: 02 - Door Parts

Replacement nameplate for your refrigerator. This identification plate attaches to the exterior and displays model information. Needed when original is missing, damaged, or illegible.

Insulating door gasket seals refrigerator fresh food compartment to maintain temperature and efficiency. Replace if torn, cracked, or loose fit.

Replace your refrigerator door gasket to restore an airtight seal, prevent cold air leaks, and eliminate frost buildup. Confirm fit with your model number.

Replaces a cracked, broken, or missing door bin on your top-mount refrigerator. Attaches to the inner door liner to restore storage space and organization.

Replacement door bin for top-mount refrigerators. Restores organized storage for bottles, jars, and small items. Replace if cracked, broken, or missing.

This replacement door bin restores secure, organized storage on your refrigerator door, keeping bottles and condiments in place and easy to reach. It's a direct swap for a damaged or missing bin to keep items from tipping or falling.

• Mounts on the inner door as a shelf-style bin to hold jars, bottles, and small items
• Helps organize contents and maximize usable door space
• Replace if cracked, chipped, or the retaining tabs are broken
• Common symptoms: bin falls off, won't stay seated, or the original is missing

• Empty the old bin and lift straight up to release from the door tabs/rails
• Align the new bin with the slots/rails and press down until fully seated
• Do not force cold plastic; let it warm to room temperature to reduce cracking risk
• Avoid overloading the bin after installation

This is a small gray bearing that fits inside the door hinge assembly on a refrigerator or freezer. It provides a smooth pivot point so the door opens and closes easily without binding or scraping. Replace this bearing if the door feels stiff, makes grinding noises when opening, or does not align properly with the cabinet.

Replacement cover panel for top-mount refrigerators. Installs to conceal internal components or hardware. Order when original is cracked or missing.

This factory screw secures interior or door components in your refrigerator so they stay tight and aligned. Replace missing, stripped, or corroded hardware to eliminate looseness and prevent parts from shifting or rattling during use.

• Fastens brackets, trim, rails, bins, or handles to the cabinet or door
• Restores a secure fit when the original screw is lost, damaged, or rusted
• Helps correct looseness, vibration, and rattling from unsecured parts
• Common symptoms: loose or wobbling handle/trim, misaligned parts, missing hardware

• Disconnect power to the appliance before servicing; turn off water if working near dispenser/ice areas
• Match to the original hardware and install in the same location; reuse any washers/spacers
• Start threads by hand to prevent cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to avoid stripping threads or cracking plastic

This small replacement button plug snaps into a control panel opening to restore a clean appearance and help keep dirt, moisture, and debris out of the switch area. It's a simple cosmetic and protective part for consoles and panels. What it does:

• Covers unused or damaged button openings on control panels
• Helps prevent dust, moisture, and food debris from entering the switch cavity
• Restores the panel's finished look after a broken or missing button cap
• Fits into the button hole and holds in place by friction

• Disconnect power to the appliance before attempting any work
• Press the plug firmly into the empty button hole until it snaps into place
• Small flat tool may help for removal—use caution to avoid scratching the panel
• Keep small parts away from children and pets

Replace your refrigerator's cracked, broken, or loose door handle. This handle installs on the door exterior to restore a secure grip and clean appearance.

Replace your cracked, loose, or worn refrigerator door handle with this right-hand stainless steel grip. Restores secure door access and clean appearance.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

This part number contains one (1) screw.

Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.