Parts for Electrolux FFTR1821TD4: 02 - Door Parts

Creates an airtight seal to prevent warm air from entering your freezer. Replace if you notice frost buildup, ice formation, or detachment. Verify fit by model.

Replaces worn fresh food door seal to restore airtight closure, prevent condensation, and reduce energy loss. Replace when torn, warped, or gapped.

The Door Shelf is an OEM replacement part for Frigidaire refrigerators. This gallon door shelf measures about 23 inches wide from inside to inside. 

Causes of a bad door shelf can include frequent use, overloading, or accidental impacts, leading to cracks, breaks, or warping. When the door shelf is damaged, it can compromise the stability and security of stored items, making it less effective for storage needs.

Symptoms of a bad part may include- 

• Cracks or breaks in the plastic
• Difficulty holding items securely in place 
• Shelf not staying attached to the door 
• Difficulty closing the door

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Replacement door bin shelf for refrigerator doors. Installs on the inside door to hold condiments and bottles. Replace if cracked, broken, or missing.

The Dairy Door is an OEM replacement part for  Frigidaire side-by-side refrigerators. Located inside the fresh food compartment, it provides a dedicated storage area for milk, yogurt, cheese and other dairy products requiring colder temperatures. The door measures approximately 9 inches wide and 5 inches high.

Causes of a bad dairy door include normal wear from repeated opening and closing over time. Exposure to spills inside the refrigerator can also potentially damage door shelf components or seals.

Symptoms of a bad dairy door are: 

• Difficulty opening or closing the door smoothly  
• Door alignment issues where it does not sit flush in the frame
• Leaks or moisture inside the dairy storage area
• Damage or cracks in shelf supports or gasket seals

This OEM part is also compatible with models from brands like Electrolux, Gibson, and Kelvinator brand models.

NOTE: For white use 240337701

Replace your cracked, broken, or missing freezer door shelf. This storage bin installs on the freezer door for convenient access to frozen items.

This small black plug/button covers a hinge or bearing access hole to restore a finished appearance and help keep out dirt and debris. It's a simple, inexpensive trim piece that maintains the appliance's look and helps protect internal components. What it does:

• Covers exposed hinge or bearing access holes for a clean, finished appearance
• Helps keep dust and debris out of hinge or bearing cavities
• Prevents snagging and reduces the chance of small items entering the opening
• Matches factory appearance and fit for a seamless repair

• Push-fit design; press into the hole until fully seated
• Keep away from small children — small part is a choking hazard

This outer freezer door panel restores the sealed front surface of your freezer and helps maintain proper cold retention and appearance. It replaces a damaged, dented, or cracked freezer door to help the compartment cool efficiently. What it does

• Replaces the exterior freezer door panel to restore a proper seal and barrier between freezer interior and kitchen air.
• Helps prevent cold air loss that can cause frosting, temperature fluctuations, or overworked compressors.
• Restores structural integrity and appearance when the original door is dented, cracked, or warped.
• Works with existing hinges, gaskets, and trim when those components are undamaged.

• One outer freezer door panel.

• High-level install: remove interior contents and ice buildup, support door weight, disconnect any wiring or trim as applicable, then unbolt old door and mount replacement.
• Handle and hinge hardware may need to be transferred from the original door.
• Always unplug the appliance before starting repair and use proper lifting support to avoid injury or damage.
• If the gasket, hinges, or internal components are damaged, replace those parts as needed for a complete repair.

Factory identification label displaying model, serial, and rating information. Replace your refrigerator's worn, faded, or missing name plate label.

Limits refrigerator door opening range to prevent overextension and hinge damage. Replace worn or broken stops to restore controlled movement.

Plastic door stop that cushions refrigerator door closure and prevents impact damage to walls or cabinets. Replace if cracked, broken, or missing.

Black plug button that covers exposed holes or openings in refrigerator doors and panels. Restores a finished look and keeps dirt out of unused mounting holes.

Complete refrigerator door assembly that installs on the cabinet frame. Replace a cracked, dented, or damaged door to restore your unit's appearance.

Replacement door handle for top-mount refrigerators. Installs on the refrigerator door to restore grip and appearance when original is cracked or broken.

Replacement mounting screw for refrigerator panels, trim, and brackets. Needed when original screws are missing, stripped, or damaged during repairs.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Nylon bearing that fits on the door hinge pivot point. Replace when worn, cracked, or missing to prevent door sagging and alignment issues.

This part number contains one (1) screw.

Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.