Parts for Electrolux FFTR1821TSF: 02 - Door Parts

Creates an airtight seal to prevent warm air from entering your freezer. Replace if you notice frost buildup, ice formation, or detachment. Verify fit by model.

Replaces worn fresh food door seal to restore airtight closure, prevent condensation, and reduce energy loss. Replace when torn, warped, or gapped.

The Door Shelf is an OEM replacement part for Frigidaire refrigerators. This gallon door shelf measures about 23 inches wide from inside to inside. 

Causes of a bad door shelf can include frequent use, overloading, or accidental impacts, leading to cracks, breaks, or warping. When the door shelf is damaged, it can compromise the stability and security of stored items, making it less effective for storage needs.

Symptoms of a bad part may include- 

• Cracks or breaks in the plastic
• Difficulty holding items securely in place 
• Shelf not staying attached to the door 
• Difficulty closing the door

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Replacement door bin shelf for refrigerator doors. Installs on the inside door to hold condiments and bottles. Replace if cracked, broken, or missing.

The Dairy Door is an OEM replacement part for  Frigidaire side-by-side refrigerators. Located inside the fresh food compartment, it provides a dedicated storage area for milk, yogurt, cheese and other dairy products requiring colder temperatures. The door measures approximately 9 inches wide and 5 inches high.

Causes of a bad dairy door include normal wear from repeated opening and closing over time. Exposure to spills inside the refrigerator can also potentially damage door shelf components or seals.

Symptoms of a bad dairy door are: 

• Difficulty opening or closing the door smoothly  
• Door alignment issues where it does not sit flush in the frame
• Leaks or moisture inside the dairy storage area
• Damage or cracks in shelf supports or gasket seals

This OEM part is also compatible with models from brands like Electrolux, Gibson, and Kelvinator brand models.

NOTE: For white use 240337701

Replace your cracked, broken, or missing freezer door shelf. This storage bin installs on the freezer door for convenient access to frozen items.

Control panel button won't respond? This push button restores tactile control on your refrigerator. Snaps into place for a factory-fit repair in minutes.

Replacement nameplate for your refrigerator. This identification plate attaches to the exterior and displays model information. Needed when original is missing, damaged, or illegible.

Limits refrigerator door opening range to prevent overextension and hinge damage. Replace worn or broken stops to restore controlled movement.

Plastic door stop that cushions refrigerator door closure and prevents impact damage to walls or cabinets. Replace if cracked, broken, or missing.

Gray plastic plug button that covers screw holes on refrigerator exterior panels. Replace missing, cracked, or discolored plugs for a clean finish.

Replaces the outer door panel assembly on your top-mount refrigerator. Ideal for fixing dented, rusted, or damaged door surfaces that affect appearance.

Replace your refrigerator's cracked, broken, or loose door handle. This handle installs on the door exterior to restore a secure grip and clean appearance.

Replace your cracked, loose, or worn refrigerator door handle with this right-hand stainless steel grip. Restores secure door access and clean appearance.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

Black button plug that covers upper hinge mounting holes on your refrigerator. Replace if original plug is missing, cracked, or broken for a clean finish.

Nylon bearing that fits on the door hinge pivot point. Replace when worn, cracked, or missing to prevent door sagging and alignment issues.

This part number contains one (1) screw.

Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.

This stainless steel cleaner restores and protects stainless surfaces, removing fingerprints, smudges and light soils to improve appearance and make routine cleaning easier. Safe for finished stainless when used as directed. What it does:

• Cleans away fingerprints, grease, and light residue from stainless surfaces
• Restores a streak-free shine and improves overall appearance
• Helps reduce visible smudges for easier routine maintenance
• Leaves a light protective finish that helps resist fingerprints between applications

• Read and follow the product label before use; test on an inconspicuous area first
• Apply to a soft cloth and wipe with the grain of the stainless; avoid abrasive pads
• Do not use on hot surfaces, painted finishes, or unsealed metals unless manufacturer approves
• Keep out of reach of children and avoid contact with eyes; if contact occurs, rinse thoroughly

Secures refrigerator grille or trim to cabinet, preventing rattles and gaps. Replace when broken or missing to restore proper panel alignment. Verify fit with your model number before ordering.

Mounting screw for refrigerators and freezers. Secures panels, brackets, and internal components. Replace when stripped, missing, or damaged.

Color: White