Parts for Gaggenau GM286-710: 02 - Fascia Panel, Door And Spray Assemblies & Racks Parts

This plate tray is a replacement rack insert that restores safe plate storage and loading in the dishwasher rack. It keeps plates upright and separated for effective cleaning and prevents shifting during cycles. What it does:

• Provides dedicated support for plates, keeping them upright and spaced for better water flow
• Replaces cracked, broken, or missing trays that allow plates to tip or collide
• Helps reduce noise from loose dishes and prevents plate-to-plate damage
• Fits into the existing dishwasher rack to restore original plate-holding function

• Disconnect power to the appliance before servicing and remove the rack for easier access
• Install by aligning with the rack slots or clips and snapping into place; no special tools typically required
• Inspect surrounding rack components for damage and replace if worn to ensure proper fit

This lower rack assembly replaces a worn or damaged lower dishwasher rack to restore stable support for dishes and cookware. It provides smooth rolling and secure placement to help the dishwasher hold and clean lower-basket items reliably. What it does:

• Supports plates, pots and larger items on the dishwasher's lower level
• Restores proper wheel alignment and smooth in-and-out movement
• Helps prevent tipping or shifting of dishes during wash cycles
• Works with the lower basket area to keep items positioned for effective cleaning

• Disconnect power and water supply before starting any repair
• Inspect existing mounting clips/wheels and transfer any reusable hardware
• Handle rack edges and rollers carefully to avoid damage to rack coating

This sump cover is the molded cover for the dishwasher pump/sump assembly that helps direct wash and drain flow and keeps debris away from the pump. Replacing a damaged cover restores proper water routing and component protection. What it does:

• Covers the pump/sump area to help keep food particles and debris out of the pump
• Directs water flow from the wash chamber into the drain/pump assembly
• Can resolve symptoms such as poor draining, unusual pump noise, or water pooling in the tub when cracked or broken
• Helps maintain correct sealing and alignment of sump components

• One sump cover

• Disconnect power to the appliance before beginning any service
• Access requires removing the lower kickplate and/or dishwasher tub base
• Inspect associated seals and fasteners; replace any damaged clips or gaskets for a proper fit
• Handle plastic parts carefully to avoid cracking; test operation after reassembly

This is a replacement sump mounting screw that secures the dishwasher sump/pump assembly, helping maintain a sealed, stable drain and pump connection. Use it when the original screw is missing, stripped, or corroded. What it does:

• Fastens the sump/pump housing to the dishwasher base to keep the pump assembly aligned and secure.
• Helps maintain the seal at the sump area when used with the correct O-ring (replace O-ring if damaged).
• Prevents leaks and vibration caused by loose or damaged sump fasteners.
• Restores proper mechanical connection after service or part replacement.

• One sump mounting screw

• Replace only with the exact OEM screw.
• Turn off power and water to the appliance before accessing the sump/pump area.
• Inspect the sump O-ring (referenced O-ring part) and replace if worn to ensure a proper seal.
• Use appropriate tools and hand-tighten to OEM torque recommendations; avoid over-tightening to prevent damage.

This rubber sump gasket seals the dishwasher sump to stop leaks and keep water contained in the drain/motor area. It restores a watertight seal to prevent water pooling and protect the motor assembly. What it does:

• Forms a seal between the sump and adjacent housing to prevent water leaks
• Helps stop water from pooling under the appliance or running into the cabinet
• Protects the motor and electrical components from moisture damage
• Can reduce unusual dripping or intermittent leaks from the dishwasher base

• Disconnect power and water supply before starting any repair
• Remove access panels and drain components to reach the sump area
• Inspect mating surfaces for residue or damage and clean before seating the gasket
• Seat the gasket evenly; reassemble panels and run a short test cycle to confirm there are no leaks

This change over (timer selector) controls the cycle selection and timing functions on compatible appliances, restoring proper cycle advancement and user control. It provides a direct replacement for a worn or faulty selector mechanism. What it does:

• Selects and advances wash/dry cycles according to the control settings
• Routes signals within the control assembly so the appliance runs the chosen program
• Commonly replaces a cracked, loose, or non-responsive selector knob or switch
• Resolve symptoms like cycles not advancing, selector not responding, or intermittent operation

• Disconnect power (and water, if applicable) before attempting replacement
• Handle with care to avoid bending contacts or damaging plastic tabs
• Verify alignment and secure mounting before restoring power

This part has been discontinued by the manufacturer and is no longer available.

This lid for handle is a small replacement cap that covers the dishwasher door handle's attachment hardware for a finished look and to protect fasteners from moisture and debris. It restores a clean appearance and helps prevent snagging. What it does:

• Covers exposed screws or mounting points on the door handle for a smooth exterior finish
• Protects hardware from water intrusion and dirt that can cause corrosion over time
• Helps prevent clothing or towels from catching on the handle area
• Replaces cracked, broken, or missing handle caps that affect appearance and function

• One lid for handle

• Designed for exterior snap- or press-fit installation;
• No special tools typically required; a small flat tool may help with removal of the old cap
• Disconnect power to the appliance if any disassembly exposes electrical components
• If you see additional damage to the handle or mounting hardware, replace those parts as needed

This adjustable panel fills and finishes the gap between an appliance and surrounding cabinetry, letting you achieve a clean, even appearance across variable opening widths. It adjusts to fit openings from 286 to 710 mm for flexible installation. What it does:

• Provides a finished edge and covers gaps between the appliance and cabinet opening
• Telescoping/adjustable construction lets one part fit a range of opening widths
• Helps prevent debris from entering cabinet-to-appliance gaps
• Restores proper alignment and visual continuity when trim or panels are damaged or missing

• High-level task: remove existing trim/panel, slide panel to required length, and secure per appliance bracket locations
• Use basic hand tools (screwdriver) and support the panel during fastening to avoid scratches
• Follow your appliance's service manual for exact mounting points and hardware requirements
• If working near electrical components, turn off power to the appliance and take appropriate safety precautions

This hinge guide is the door support piece that helps keep the appliance door aligned and moving smoothly. Replacing a worn guide restores proper door tracking and reduces binding or uneven closing. What it does:

• Guides and supports the door hinge to maintain correct alignment during opening and closing
• Prevents door binding, rubbing, or catching on the cabinet or frame
• Helps reduce uneven wear on hinge components and preserves smooth operation
• Works as a direct-fit replacement when the original guide is cracked, broken, or worn

• One hinge guide as shown

• Turn off power and follow appliance-specific safety procedures before servicing
• Inspect surrounding hinge hardware and mounting points; replace damaged fasteners if needed
• Typically installs with basic hand tools; do not force parts—ensure proper seating before reassembly

This rubber spacer cushions and spaces components to reduce vibration and prevent metal-to-metal contact, helping cut noise and wear in the appliance. Simple, small replacement to restore proper fit and dampening. What it does:

• Acts as a vibration damper and protective bumper between parts
• Prevents rubbing, rattling, and abrasion on panels or assemblies
• Helps maintain correct spacing and alignment of adjacent components
• Common symptom links: rattling, vibration, intermittent noise, or loose-feeling parts

• Disconnect power and water before servicing
• Access may require removing a panel or trim—keep track of fasteners
• Replace like-for-like; ensure the spacer seats fully in its mounting location