Parts for Maytag DNF17BCLWHT / 8V011: 03 - Unit Compartment & System Parts

This part has been discontinued by the manufacturer and is no longer available.

This part has been discontinued by the manufacturer and is no longer available.

Replace a faulty heat exchanger if water is freezing in the drain tube during defrost cycles. Compatible with various freezer and refrigerator models.

Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.

Pan head screw secures panels, brackets, and trim on refrigerators and freezers. Replace missing, stripped, or damaged screws to restore proper fastening.

Fix excessive frost buildup in your freezer with this defrost timer. Restores the 6-hour defrost cycle to keep cooling consistent. Moderate DIY repair.

Fix ice buildup in your freezer with this defrost heater. Replaces burnt-out heating elements on evaporator coils. Moderately difficult, 2-5 hour repair.

Refrigerator not cooling or freezer making loud noise? A failed evaporator fan motor stops cold air circulation. This DIY repair takes about 30 minutes.

This is a metal mounting bracket that secures the motor in place inside the freezer compartment. It holds the fan motor steady to reduce vibration and ensure proper airflow for consistent cooling. Replace this bracket if the motor is loose, rattling, or vibrating excessively, which can lead to increased noise and uneven temperatures.

This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation.

• Provides the correct fastener for locations identified in your model's parts diagram
• Helps prevent looseness, vibration, and rattling of panels or brackets
• Replace if the head is stripped, threads are worn, or the screw is missing
• Symptoms can include loose parts, gaps, or noises from movement

• Unplug the refrigerator and shut off water if working near the ice maker or dispenser
• Match length and type to the original; follow your model's parts diagram for placement
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
• Keep track of screw positions; do not mix different screw lengths or styles