Parts for Electrolux DGHX2655TFA: 04 - Cabinet Parts

Covers the factory test opening on your refrigerator cabinet or liner. Replace if missing, cracked, or damaged to restore a finished look and seal.

Light lens cover for refrigerator interior lighting. Replaces cracked, yellowed, or missing lens covers. Snaps into place over bulb compartment.

Replace your dim or flickering refrigerator interior LED light assembly for bright, clear visibility. Essential when light fails or flickers. Verify fit with your model number before ordering.

Secures panels, brackets, handles, and trim inside your refrigerator. Replace missing, stripped, or damaged screws to eliminate rattling and looseness.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Replacement door closer cam for refrigerator hinges. Installs on upper door hinge to control door swing and prevent cabinet damage. Needed when cracked or worn.

This roller assembly consists of small caster-style wheels mounted on a support ring, designed to allow a shelf, drawer, or internal component to slide smoothly inside the refrigerator or freezer compartment. It supports the weight of stored items while enabling easy access. Replace this assembly if the rollers are cracked, seized, or if the shelf or drawer no longer glides properly and feels stuck or wobbly.

Lower door hinge bracket supports the bottom refrigerator door hinge assembly. Replace if bent, broken, or cracked to restore proper door alignment.

Lower door hinge secures the bottom corner of your refrigerator door and provides a pivot point for smooth opening and closing. Replace if cracked or worn.

OEM mounting bracket that secures the hinge and pin assembly inside your refrigerator. Replace if cracked, broken, or missing to restore proper alignment.

Supports and aligns the refrigerator door at the hinge pivot point. Replace if cracked, bent, or worn to restore stable door operation and proper sealing.

Covers and secures the cabinet hinge on your refrigerator. Replaces a cracked, broken, or missing cover to restore a clean appearance and protect the hinge.

Replacement upper door hinge cover for your refrigerator. Conceals and protects the top hinge assembly. Install when original is cracked, broken, or missing.

Specs: 1.40`` long

Specs: Hex head ,1/4-20 x 5/8

This roller assembly consists of small caster-style wheels mounted on a support ring, designed to allow a shelf, drawer, or internal component to slide smoothly inside the refrigerator or freezer compartment. It supports the weight of stored items while enabling easy access. Replace this assembly if the rollers are cracked, seized, or if the shelf or drawer no longer glides properly and feels stuck or wobbly.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Secures refrigerator shelves in their track for stable storage. Fits into shelf track to support glass or wire shelves. Replace if cracked or broken.

The Main Power Board is an OEM replacement part for Frigidaire refrigerators. It plays a crucial role in distributing power and controlling electrical components within the refrigerator. 

Causes of a bad Main Power Board can include failures or malfunctions of electronic components over time due to normal operational wear, voltage fluctuations, or moisture damage. 

Symptoms of a bad Main Power Board include:

• Lights or temperature control not functioning correctly  
• Refrigerator cycles on and off frequently
• Unusual noises or vibrations coming from inside cabinet
• Complete failure to power on  

This replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Genuine mounting screw secures panels, brackets, and covers inside your refrigerator. Replace missing, stripped, or corroded fasteners to restore secure fit.

Refrigerator damper housing that encloses the air damper control assembly. Replace this housing if cracked, broken, or damaged to restore proper fit.

Meat keeper not maintaining proper temperature? This damper regulates airflow to your meat/deli drawer. Controls cold air flow for optimal freshness.

Replaces your refrigerator's front bottom grille kickplate. Installs at the base below the doors. Order if yours is cracked, broken, or missing.

This part number contains one (1) screw.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Supports refrigerator crisper or bin drawers for smooth gliding. Replace when drawers stick or bind. Confirm fit with your model number listed.

Metal rivet fastener permanently secures panels, brackets, and internal components in refrigerators. Replace damaged, missing, or worn rivets to restore fit.

This cover assembly attaches to the back or bottom of the refrigerator to enclose and protect the compressor and related components. It helps keep dust and debris away from the compressor area while providing a finished appearance. Replace this cover if it is cracked, broken, or missing, which can allow dirt buildup on the compressor and condenser that reduces cooling efficiency.

Seals evaporator cover to direct airflow and prevent frost buildup. Replace if worn, cracked, or causing excess frost. Confirm fit with your model number.

Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.

Interior light stays on or won't turn on? This door-activated light switch controls your refrigerator lighting. Simple repair restores proper operation.

Supports the glass crisper cover in your refrigerator. Replace if cracked, broken, or missing. Installs on the refrigerator wall above the crisper drawer.

Refrigerator cover panel that conceals internal components or provides finished appearance. Replace if cracked, discolored, broken, or missing.

This return air seal keeps refrigerator airflow channels sealed so cold air returns to the evaporator properly, helping maintain consistent temperatures and reduce frost and moisture issues. It replaces a worn or damaged return-air gasket. What it does

• Seals the return-air opening to direct cold air back to the evaporator
• Helps maintain even cooling and prevents warm air infiltration
• Reduces frost, moisture buildup, and uneven temperature zones
• Commonly replaced when you notice poor cooling, excessive frost, or air leakage noises

• One return air seal

• Disconnect power before starting work
• Remove any trim or panels that block access to the return-air opening
• Seat the seal into the channel or mating surface; some installations use adhesive or retainers—follow the manufacturer's instructions

Wire harness for side-by-side refrigerators. Replaces damaged, frayed, or broken wiring harnesses that connect electrical components inside your fridge.

Plastic grommet that supports and secures refrigerator shelves. Replaces broken, cracked, or missing grommets causing shelves to lean or sag.

Rear support clip that holds the crisper cover shelf in place. Replace when broken, snapped, or cracked to restore stability to your crisper drawer area.