Parts for Electrolux GRFC2353AFD: 04 - Cabinet Parts

This is a foam or rubber seal that fits around the fan cover inside the refrigerator or freezer compartment, creating an airtight barrier to maintain proper airflow and temperature control. It prevents warm air from bypassing the evaporator fan area. Replace this seal if you notice frost buildup near the fan cover, inconsistent cooling temperatures, or if the seal is torn, compressed, or deteriorated.

Seals refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or causing temperature issues. Verify fit with model number.

This is a fan blade that attaches to the evaporator fan motor inside the freezer or refrigerator compartment. It circulates cold air over the evaporator coils and throughout the appliance to maintain consistent temperatures. Replace this blade if it is cracked, broken, or warped, which can cause poor cooling, unusual noises, or uneven temperatures in the refrigerator or freezer.

Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.

The Motor Mount Bushing is an essential OEM component inside Frigidaire bottom-mount refrigerators. It secures the evaporator fan motor securely while cushioning vibrations transmitted to the refrigerator body.  

Causes of failure include natural wear of plastic glide surfaces from prolonged absorption of mechanical stresses during compressor and fan operation cycles. Deformations compromise uniform motor positioning over time.

Symptoms of a worn motor mount bushing include:

• Rattling noises emanating from the refrigerator fan area
• Reduced air circulation leading to warmer interior temperatures 
• Lubricant leaks at the mounting point requiring replacement

This authentic OEM replacement is compatible with Frigidaire, Electrolux and select Kenmore models.

Refrigerator air tower with gasket controls airflow between compartments. Replace if you notice temperature inconsistencies or frost buildup. Verify fit.

Seals the coil cover area to maintain proper airflow and prevent dust buildup. Replace if worn, cracked, or losing seal efficiency. Verify fit with your model.

Replaces broken or dim refrigerator interior light assembly to restore clear compartment illumination. Install when light housing cracks or fails.

Houses the interior bulb and lens to illuminate your refrigerator. Replace when light dims, flickers, or stops working. Verify fit with your model number.

Replace your refrigerator's light assembly to restore interior illumination. Includes housing, socket, and lens for secure bulb mounting. Verify fit by model.

Provides interior refrigerator illumination for clear visibility of food and settings. Replace when light fails, housing cracks, or lens breaks. Confirm fit with your refrigerator model number before ordering.

Replacement screw fastener for securing panels, trim, and components inside your refrigerator. Needed when original screws are stripped or missing.

Mounting screw for refrigerator components and panels. Replaces lost, stripped, or damaged screws. Essential hardware for secure assembly.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Replacement screw that secures refrigerator door handles to the door. Needed when the original screw is worn, missing, or stripped, causing a loose handle.

This roller assembly consists of small caster-style wheels mounted on a support ring, designed to allow a shelf, drawer, or internal component to slide smoothly inside the refrigerator or freezer compartment. It supports the weight of stored items while enabling easy access. Replace this assembly if the rollers are cracked, seized, or if the shelf or drawer no longer glides properly and feels stuck or wobbly.

Secures your refrigerator to the floor or wall to prevent tipping. Replace if bracket is bent, broken, or missing to restore proper stability.

Supports and allows your refrigerator door to pivot smoothly. Replace this hinge assembly if yours is worn, bent, broken, or causing door misalignment.

Secures and aligns your refrigerator door for smooth opening and closing. Replace if door sags, won't close properly, or seal doesn't engage fully. Verify fit by model number.

Secures and supports the refrigerator door hinge assembly to keep the door aligned and operating smoothly. Replace if your bracket is cracked, broken, or worn.

This is a gray plastic cover that fits over the upper door hinge on the left side of the refrigerator. It provides a finished appearance and protects the hinge mechanism from dust and debris. Replace this cover if it is cracked, broken, or missing, which can detract from the appliance's appearance and leave the hinge exposed.

Specs: Hex head ,1/4-20 x 5/8

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.

Hex washer head ,10-32 x 0.375. Ground

This cover assembly attaches to the back or bottom of the refrigerator to enclose and protect the compressor and related components. It helps keep dust and debris away from the compressor area while providing a finished appearance. Replace this cover if it is cracked, broken, or missing, which can allow dirt buildup on the compressor and condenser that reduces cooling efficiency.

Fixes incorrect temperature readings and short cycling. This thermistor monitors fridge temps and signals the control board. Moderate DIY repair.

Replacement outer housing cover for refrigerators. Shields internal components and restores exterior appearance. Needed when original is cracked or broken.

Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.

Fix a refrigerator light that won't turn on or stays on when the door closes. This door light switch restores proper interior lighting in minutes.

Refrigerator won't cool properly or runs constantly? The thermistor monitors temperature and signals the control board. Moderate DIY repair.

This is a gasket that seals around the upper evaporator cover inside the freezer compartment. It helps maintain proper airflow and prevents warm air from bypassing the evaporator coils. Replace this gasket if you notice excessive frost buildup in the freezer, inconsistent cooling, or if the gasket appears torn, warped, or no longer seals tightly against the evaporator cover.

Seals refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or causing temperature issues. Verify fit with model number.

Secures components to the cabinet frame for solid support and alignment. Replace this bracket if worn, bent, or broken to restore structural stability.

Directs cold air from the evaporator through your freezer compartment. Snaps into the back wall. Replace if cracked, warped, or missing to restore airflow.

Fix loose components or rattling noises in your refrigerator with this lock washer. Prevents fasteners from loosening due to vibration. Easy 5-minute fix.

Replace a cracked or missing protective trim cover on your refrigerator. This cover shields internal components from dirt and restores a clean look.

Secures refrigerator grille or trim to cabinet, preventing rattles and gaps. Replace when broken or missing to restore proper panel alignment. Verify fit with your model number before ordering.

Machine screw secures panels, trim, and internal brackets in your refrigerator. Replace worn, stripped, or missing fasteners to keep components aligned.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.