Parts for Maytag MAH7500AWW: 05 - Door & Front Panel Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Color: White. For bisque order 22003243. For the inner door panel in white order WP22003275. Used on Maytag Neptunes. Includes medallion.

This vent tube assembly directs exhaust airflow from the dryer to the cabinet exit, restoring proper venting and reducing moisture buildup. It's a direct-fit replacement that helps return your appliance to normal drying performance. What it does:

• Channels hot, moist air from the dryer drum to the exhaust outlet to prevent interior condensation.
• Replaces damaged, crushed, or disconnected tubing that can cause poor drying or longer cycle times.
• Helps reduce lint accumulation at the blower assembly by providing a continuous exhaust path.
• Can resolve symptoms like reduced drying efficiency, excess humidity around the appliance, and unusual airflow noises.

• One vent tube assembly

• Disconnect power (and gas supply if applicable) before starting any repair.
• Access the dryer rear or cabinet per your model's service instructions to remove the old tube and install the new one.
• Ensure the tube is routed without sharp bends or kinks and secure clamps/fasteners tightly to prevent leaks.

The Washer Door Latch Assembly is an OEM part for Whirlpool washing machines. This assembly is crucial for securing the washer door during operation, ensuring that the door remains closed and locked while the machine is in use. This helps prevent water leaks and ensures that the wash cycle completes safely and effectively.

You should replace the door latch assembly if it becomes faulty or damaged. Causes of a bad door latch assembly can include wear and tear over time, mechanical failure, or accidental damage from forcefully closing the door. A malfunctioning latch can prevent the washer from starting or cause it to stop mid-cycle.

Symptoms of a bad door latch assembly include:

• The washer door not locking or staying closed
• The washer not starting or pausing mid-cycle
• Error codes related to door lock issues displayed on the control panel
• Water leakage around the door area during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

NOTE: Washer door latch, gray w/switches and ind. Light 

Door lock hoop assembly that positions and secures the door latch striker so the door closes and the interlock can engage. Replacing a worn or damaged hoop restores proper door alignment and reliable door closure. What it does:

• Positions the latch striker so the door can fully engage and stay closed.
• Allows the door interlock to operate correctly; often replaced when the appliance won't start because the door won't latch.
• Reduces door play and rattling caused by a bent, cracked, or worn hoop.

• Disconnect power (and water supply for washers) before starting any repair.
• Access may require removing the door or front panel; follow the appliance service manual for model-specific steps.
• Inspect the latch/strike and mounting hardware while installing; replace any damaged components and verify correct alignment before reassembly.

Color: White. For bisque order WP22003279. For the outer door panel in white order 22003242. Used on Maytag Neptunes.

Double

Single

This grommet seals and cushions the dryer/refrigerator vent tube where it passes through the cabinet, helping prevent air leaks and reduce vibration noise. It restores a tight vent connection for proper airflow and quieter operation. What it does

• Provides a secure, flexible seal around the vent tube to reduce air leaks.
• Cushions the vent tube to minimize vibration and rattling during operation.
• Helps maintain proper airflow by keeping the vent connection aligned.
• Commonly replaced when cracked, torn, or excessively worn.

• One vent tube grommet.

• Turn off and unplug the appliance (or disconnect power) before starting any repair.
• Access may require removing the back panel or interior trim—follow your model's service instructions.
• Inspect surrounding vent tubing and fasteners; replace any damaged components for a complete repair.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This hinge kit replaces a worn or damaged refrigerator/freezer door hinge to restore proper door alignment and sealing. It helps stop door sagging and ensures smooth opening and closing for a tight temperature seal. What it does:

• Replaces a damaged or bent door hinge to correct misaligned or sagging doors
• Restores smooth hinge movement for easier opening and closing
• Helps the door seal properly to maintain internal temperature and efficiency
• Prevents rubbing or binding that can damage door gasket or cabinet finish

• Disconnect power to the appliance before beginning any repairs to avoid injury
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use basic hand tools; follow for correct alignment and torque
• After installation, check door alignment and gasket contact; adjust as needed

This door hinge secures and guides a refrigerator door, restoring proper alignment and smooth opening/closing. Replaces a worn or damaged hinge to reduce sagging, rubbing, or uneven gaps and help maintain a tight door seal. What it does:

• Provides the pivot point that supports and aligns the refrigerator door
• Restores correct door height and gap to prevent rubbing or catching
• Helps the door close fully to maintain proper temperature and efficiency
• Reduces sagging or drooping that can cause seal and cooling issues

• One door hinge

• Disconnect power to the appliance before beginning any repair to avoid electrical hazards
• Support the door during removal/installation to prevent injury or damage to the cabinet
• Use the same fasteners provided or retained from the original hinge; torque per manufacturer guidelines
• Adjust hinge position per service instructions

Note: This part is one screw, order quantity needed.

Specs: No.8-18AB WAFER HD

Color: White

This factory screw secures appliance panels and components, keeping them properly aligned and quiet during operation. Replace a stripped, corroded, or missing fastener to restore a snug fit and dependable performance in the original mounting location. What it does:

• Fastens brackets, panels, trim, or internal hardware to the cabinet/frame as specified by the manufacturer
• Helps maintain proper alignment and reduce rattling or vibration when a screw is worn or missing
• Direct replacement for damaged, stripped, or rusted hardware
• Used in various locations per the service diagram; match to the original position

• 1 screw

• Disconnect power (and shut off water or gas, if applicable) before servicing.
• Compare length and thread style to the original; install in the same location.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• Reinstall any brackets or panels in the correct order.

This hinge screw fastens a hinge to the appliance cabinet or door, helping keep the door aligned and operating smoothly. Replace a missing or stripped screw to restore solid hinge support and reliable closure.

• Secures the hinge to the cabinet/frame or door
• Maintains proper alignment at the hinge point
• Helps ensure smooth opening/closing and effective sealing where applicable
• Common symptoms: loose or wobbly hinge, door sagging/misaligned, poor closure/seal, rattling, or a missing/stripped fastener

• Disconnect power to the appliance; shut off gas if applicable
• Support the door to relieve hinge load before removing or installing screws
• Use the correct driver for your model to avoid stripping fasteners
• Start threads by hand and tighten snugly; do not overtighten

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.