Parts for Electrolux FFGH3051VSD: 05 - Top / Drawer Parts

Replaces a damaged, cracked, or missing bottom drawer on your range. Restores smooth slide action and a flush, finished look to the storage compartment.

This is a metal liner that sits inside the broil drawer at the bottom of the range, protecting the cabinet floor from grease, drips, and heat damage. It provides a smooth, cleanable surface beneath the broiler element or heating area. Replace this liner if it is rusted, warped, or has burn-through holes that allow grease to reach the range cabinet.

Metal shield protects internal components from heat and debris. Replaces damaged, cracked, or missing shields to restore proper protection around wiring.

This is the front-facing panel for the storage drawer located beneath the oven compartment. It serves as both a structural component and the visible exterior surface of the drawer, typically in a stainless steel finish. Replace this panel if it is dented, scratched, discolored, or if the drawer no longer closes flush with the range.

Replace worn drawer slide glides to restore smooth movement and eliminate sticking or noise. Guides drawer along track for reliable operation. Verify fit.

The Glide is an OEM part for Frigidaire ranges. It ensures smooth movement of the storage drawer, allowing you to easily access and organize your stored items.

A bad glide can be caused by wear and tear, damage, or lack of lubrication. Signs of a faulty glide include a sticky or jammed drawer, uneven sliding, or a drawer that doesn't close properly.

Symptoms of a bad glide can include:

• Difficulty in opening or closing the storage drawer.
• Uneven or jerky sliding motion of the drawer.
• Drawer getting stuck or not fully closing.

Replace your worn-out or damaged glide with this genuine OEM part to restore movement to your range's storage drawer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Range drawer glide ensures smooth opening and closing while keeping drawers aligned. Replace when drawers stick, scrape, or misalign. Confirm fit with model.

Drawer slide glide for electric and gas ranges. Replace if cracked, broken, or worn to restore smooth, aligned drawer movement and eliminate sticking.

Replacement cooktop grate for gas ranges. Supports cookware above burners for safe, even cooking. Replace if cracked, broken, or missing to restore stability.

Burner grate for gas ranges and cooktops. Supports cookware over the burner flame. Replace if warped, bent, rusted, chipped, or broken for safe cooking.

This is a black burner cap that sits on top of a medium-sized gas range surface burner. It distributes the flame evenly around the burner for consistent heating. Replace this cap if it is chipped, cracked, warped, or if the burner flame is uneven or yellow instead of blue.

This is a black burner cap that sits on top of a small surface burner on a gas range. It distributes the flame evenly around the burner for consistent heating. Replace this cap if it is chipped, cracked, warped, or if you notice uneven or yellow flames on the small burner.

This is a black burner cap that sits on top of a gas range surface burner head. It distributes the gas flame evenly around the burner for consistent heating. Replace this cap if it is cracked, chipped, warped, or heavily corroded, which can cause uneven flames, poor ignition, or yellow/orange flame color.

Replace your cracked or broken range oven door handle insert. This trim piece fits between the door and handle, restoring a secure, finished appearance.

Decorative trim piece for gas range that covers gaps and provides a finished appearance. Replace if cracked, chipped, discolored, or missing.

Seals gaps at the rear of your range while maintaining proper ventilation. Replace if damaged, cracked, or allowing air leaks. Confirm fit with your model.

This seal fits along the perimeter of the range main top, creating a tight barrier between the cooktop and the frame beneath it. It prevents grease, spills, and heat from reaching internal components. Replace this seal if you notice grease leaking beneath the cooktop surface, a loose-fitting main top, or if the old seal is cracked, flattened, or missing.

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

Size: 8-32t x 0.500 inch. Color: Black.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.