Parts for Mtd 165-SUB-11: Sub-11 Crankcase Parts

This piston ring set is a genuine MTD part, sold individually. This piston ring set can be used as a replacement part in a variety of outdoor appliances including lawn mowers, snowblowers, and tillers. The piston ring set comes with a variety of differently sized and shaped piston rings, which seal off the area surrounding the pistons.If the piston rings of an outdoor appliances are suffering from damage in the form of puncturing, tearing, ripping, cracking, denting, or eroding, this set can be ordered as a genuine OEM replacement part. The replacement of the broken or malfunctioning piston rings should be performed in accordance with the proper instructions from a relevant appliance manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This piston ring set is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard Man.

This is a high-quality connecting rod assembly that is used in many types of lawn and garden equipment from several manufacturers. It has a metal rod that connects to the crankshaft and piston. The purpose of the connecting rod is to allow pressure and combustion to rotate the engine's output. If this part is damaged or broken, the garden equipment may not work or may not have the desired level of performance. If this happens, the connecting rod assembly should be replaced.A basic set of tools and work gloves will be needed to replace the connecting rod assembly. First, turn off the tool with the damaged rod and put it on a level and sturdy surface. The spark plug wire should be disconnected to prevent the engine from turning on. Access the rod and replace it with the new part before use.The connecting rod assembly is sold as an individual part. It is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is made to be compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, and leaf blowers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines.

This is a governor arm shaft found on lawnmowers, chippers, and other engines on lawn and garden equipment. It is a component of the governor assembly maintains a steady speed regardless of how much stress is placed on the engine. The governor arm is connected to the carburetor arm shaft. One end of this arm is connected to the governor spring and the other to the throttle linkage. Speed is increased or decreased based on the amount of push or pull that is placed on the throttle arm. If the governor arm shaft is bent, broken, or damaged, the governor arm will not be able to maintain its speed. The engine may appear to be stuck in high speed or it won't accelerate at all.Remove the carburetor to access the governor assembly. Disconnect the governor spring and take the linkage off the governor arm. Remove the governor arm from the arm shaft and then remove the broken governor arm shaft. Install the new shaft and reassemble the governor. Reinstall the carburetor. The governor arm shaft is made from heavy-duty metal and is sold as an individual unit. It is compatible with snowblowers, lawnmowers, chippers, and other small engines manufactured by MTD, Craftsman, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, and Husky.

This replacement part is a camshaft assembly. This is a genuine replacement part made by MTD. This part is a rotating metal object that converts rotational motion to reciprocal motion. This ensures that the machine is able to move successfully according to the user's preferences at any given time. A new camshaft assembly might be needed if the user notices the engine is not working up to the normal standard. This can be from a faulty camshaft assembly and should be replaced if this is the case. Be sure the engine is turned off before attempting this repair to ensure the safety of the user and those around them. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

The flywheel key keeps the engine flywheel and the crankshaft connected. In the event that the engine is forced to a sudden stop, the flywheel key could be sheared off, making it impossible for the engine to start back up again. Replacing the flywheel key is a part of routine maintenance for many modern engines, so it should be inspected and replaced as needed. This sturdy metal flywheel key is easy to install, but remember to choose the right torque setting when doing the replacement. Always disengage the spark plug and wear gloves when replacing engine parts. This genuine flywheel key is designed to be used in a number of lawn and garden equipment products from MTD, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Husky, and Bolens. It can be used as a replacement for many models of snowblowers, lawnmowers, and log splitters. Sold individually.

This replacement part is an oil seal. This part is a genuine replacement part made by MTD. Oil seals are commonly found in machines with small engines and are responsible for making sure that oil does not leak from the appliance during or after use. A new oil seal might be needed if the current one is missing or damaged in any way. This can include being cracked, stripped, or dented. Any type of damage may cause oil to leak from the tank which can lead to additional problems within the machine itself. Be sure to wear work gloves during this repair as oil can be difficult to remove from the hands. Refer to the correct owner's manual before replacing this part. This oil seal is a genuine OEM replacement part. This part is also sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This replacement part is a gasket kit. It is a genuine replacement part made by MTD. This gasket kit is an essential part of the appliance and allows the engine to run properly and smoothly during use.A new gasket kit might be needed if the user hears unusual noises coming from inside the machine. If the machine is having trouble being turned on or cannot turn off, it might be a faulty gasket. If the appliance is slow to start this can also indicate a faulty kit. Be sure the engine is turned completely off and cooled down before attempting this repair. Be sure to refer to the owner's manual before replacing this gasket kit.This part is sold as a single kit. This gasket kit is a genuine OEM replacement part and is sourced directly from the manufacturer.

This is a gasket kit that contains a variety of parts utilized in many kinds of lawn and garden equipment. Each of the parts in the kit is created to seal two surfaces inside the equipment. The components in the kit include a carburetor insulator plate, a carburetor gasket, a carburetor insulator gasket, two carburetor gasket plates, an exhaust pipe gasket, a valve cover gasket, and an oil drain plug washer. If a lawn and garden tool is leaking fuel, air, or oil, these parts can be used to replace the faulty component.A socket wrench or small monkey wrench and a screwdriver will be needed to replace any parts included with the gasket kit. Make sure the lawn equipment is on a flat surface and the spark plug wire has been disconnected. Disassemble any needed components to reach the gasket or other part that needs to be replaced. Put in the new component and reassemble before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit. The external gasket kit is designed to be used with snowblowers manufactured by Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.