Parts for Mtd 170-VU: Vu Crankcase Parts

This is a piston ring set that is compatible with a range of lawn and garden equipment. Piston rings create a seal between the cylinder wall and the piston, so the pressurized combustion gases do not leak. If the piston rings are going bad or have failed, owners may notice that the machine is using more oil. They may also see white or gray smoke coming from the machine's exhaust. The performance of the equipment will also decline.Piston rings can fail for many different reasons. They might not have enough lubrication, which could cause them to overheat and lose their tension. The piston rings could also fail if they are installed incorrectly. Machines with problematic piston rings will have trouble operating properly and will need to be replaced.This piston ring set can work with select chippers, lawn tractors, log splitters, snowblowers, mowers, and other engines from Yard-Man, Yard Machines, MTD, Troy-Bilt, Cub Cadet, and Husky. The set is sold individually, and the genuine OEM parts have been sourced from the manufacturer.

This replacement part is a piston, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This piston is commonly found in lawn mowers and is an important part in the user process. Pistons help transfer the combustion power of the engine to other working parts of the machine. A new piston might be needed if the overall performance of the engine is lacking compared to previous uses. If the lawn mower is not able to build enough power to accelerate, the piston might be faulty. It is also common for the engine to use an excessive amount of oil or put out white or gray exhaust smoke. All of these indicators might mean that the piston should be replaced. This part is a genuine OEM replacement part. This piston is sold individually and can be used in lawn mowers manufactured by MTD.

This replacement part is a piston pin. This is a genuine replacement part made by MTD. This part is small but important to ensure that the piston is working properly during use. A new piston pin might be needed if the current one is missing or damaged. It is not uncommon for the pin to be stripped down over time due to normal wear and tear. The pin may also become lodged in place and should be replaced if this happens. Wear work gloves when completing this repair to prevent injury during the job. The engine should be completely turned off and cooled down before beginning repairs.This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This is a high-quality connecting rod assembly that is used in many types of lawn and garden equipment from several manufacturers. It has a metal rod that connects to the crankshaft and piston. The purpose of the connecting rod is to allow pressure and combustion to rotate the engine's output. If this part is damaged or broken, the garden equipment may not work or may not have the desired level of performance. If this happens, the connecting rod assembly should be replaced.A basic set of tools and work gloves will be needed to replace the connecting rod assembly. First, turn off the tool with the damaged rod and put it on a level and sturdy surface. The spark plug wire should be disconnected to prevent the engine from turning on. Access the rod and replace it with the new part before use.The connecting rod assembly is sold as an individual part. It is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is made to be compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, and leaf blowers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines.

This is a governor arm shaft found on lawnmowers, chippers, and other engines on lawn and garden equipment. It is a component of the governor assembly maintains a steady speed regardless of how much stress is placed on the engine. The governor arm is connected to the carburetor arm shaft. One end of this arm is connected to the governor spring and the other to the throttle linkage. Speed is increased or decreased based on the amount of push or pull that is placed on the throttle arm. If the governor arm shaft is bent, broken, or damaged, the governor arm will not be able to maintain its speed. The engine may appear to be stuck in high speed or it won't accelerate at all.Remove the carburetor to access the governor assembly. Disconnect the governor spring and take the linkage off the governor arm. Remove the governor arm from the arm shaft and then remove the broken governor arm shaft. Install the new shaft and reassemble the governor. Reinstall the carburetor. The governor arm shaft is made from heavy-duty metal and is sold as an individual unit. It is compatible with snowblowers, lawnmowers, chippers, and other small engines manufactured by MTD, Craftsman, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, and Husky.

This replacement part is a camshaft assembly. This is a genuine replacement part made by MTD. This part is a rotating metal object that converts rotational motion to reciprocal motion. This ensures that the machine is able to move successfully according to the user's preferences at any given time. A new camshaft assembly might be needed if the user notices the engine is not working up to the normal standard. This can be from a faulty camshaft assembly and should be replaced if this is the case. Be sure the engine is turned off before attempting this repair to ensure the safety of the user and those around them. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

The flywheel key keeps the engine flywheel and the crankshaft connected. In the event that the engine is forced to a sudden stop, the flywheel key could be sheared off, making it impossible for the engine to start back up again. Replacing the flywheel key is a part of routine maintenance for many modern engines, so it should be inspected and replaced as needed. This sturdy metal flywheel key is easy to install, but remember to choose the right torque setting when doing the replacement. Always disengage the spark plug and wear gloves when replacing engine parts. This genuine flywheel key is designed to be used in a number of lawn and garden equipment products from MTD, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Husky, and Bolens. It can be used as a replacement for many models of snowblowers, lawnmowers, and log splitters. Sold individually.

This replacement part is an oil seal. This is a genuine replacement part made by MTD. This part is used to ensure that oil and other fuel cannot escape from the tank. The seal prevents it from leaking during use to ensure the engine is able to run properly. A new oil seal might be needed if the current one has been damaged. If the seal is worn down and thinner than before, it can cause leaks and oil waste. If this is the case, the seal should be replaced immediately. Oil leakage can cause other issues within the machine. Refer to the owner's manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This short block assembly is a genuine OEM replacement part sourced directly from the manufacturer for use with the engine in many lawn and garden machines. The camshaft, crankshaft, piston, rod, valves, and governor are included in the kit. The gasket replacement kit is also included in the assembly. Damaged engines are costly and time-consuming to rebuild. Replacing the short block assembly is a less expensive option. Damage to the crankshaft is common in outdoor lawn and garden equipment. Rocks, sticks, and other debris can get caught in the engine and damage the camshaft or crankshaft. When this occurs, replacing the short block is easier than taking the entire short block apart to replace the damaged part. If the crankshaft is damaged, there is no reason to replace the entire engine when a replacement short block assembly will provide necessary repairs at a lesser cost.This short block assembly is sold as an individual part. It comes pre-assembled and ready to install. This assembly is designed for use in leaf blowers, log splitters, tillers, wood chippers, and other small engines manufactured by Cub Cadet, MTD, Yard Machines, and Troy-Bilt.

This replacement part is an oil seal. This part is small but important in various types of machines that rely on oil to run. The oil seal is found near the fuel tank and ensures that there are no leaks. If the machine is leaking oil, it can be due to a damaged oil seal. Seals like this one can wear out over time or be knocked out of place by impact.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This replacement part is an external gasket kit, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This gasket kit is different from typical gasket kids as they are used on the external side of the engines. These gaskets are still very important to the engine as a whole and allow it to run smoothly during use.A new external gasket kit might be needed if the current one is broken or damaged. If there are noises coming from inside the machine it is possible that the parts of the gasket are out of place or could be malfunctioning. Be sure the engine of the appliance is completely powered down and cooled off before replacing the gasket kit as this area can be hot from use.Be sure to reference the specific user manual prior to beginning this repair. Note that this is a genuine OEM replacement part and is told individually. This part is sourced directly from the manufacturer.

This is a complete gasket kit that is sold as a genuine OEM replacement for MTD lawn and garden equipment engines. The engine contains various gaskets throughout the components that are responsible for creating a good seal and ensuring the proper flow of air and fuel through the equipment. Over time, these gaskets can become worn, brittle, or warped and should be replaced.It is always best to replace all of the gaskets at the same time with this OEM complete gasket kit. It is manufactured by MTD and designed to work with select engines from Troy-Bilt, MTD, and Cub Cadet. It is a good idea to inspect gaskets while performing other engine repairs or maintenance. This can help identify issues before they become bigger problems and allow for a quick gasket repair instead of a total engine overhaul. The gaskets should be replaced one at a time and the area where they sit should be cleaned to ensure a good seal. Never take all of the gaskets out and try to replace them at once. It can be confusing and it may be difficult to get things back together. This complete gasket kit includes all of the gaskets that are needed for a full engine replacement.