Parts for Mtd 1P65NU: 1P65nu Cylinder Head Parts

This flange bolt is a genuine MTD part, sold individually. This flange bolt can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, string trimmers, leaf blowers, edgers, log splitters, wood chippers, and tillers. The purpose of a flange bolt is to serve as a fastening component, in conjunction with a nut, so components can be secured and affixed to one another over time.The flange bolt might have to be replaced at some point within the standard lifespan of the appliance if it is lost, misplaced, or damaged. The flange bolt can be gradually stripped over time, in which case it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This flange bolt is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Cub Cadet, Craftsman, Yard-Man, Yard Machines, MasterCut, and Huskee.

This part is a replacement rocker arm stud. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken or defective rocker arm stud on various types of outdoor small engine power equipment. This rocker arm stud works by securing the cylinder head. The rocker itself slides over the stud and is then held securely by the nut that locks it into place. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this rocker arm stud, the appropriate owner's manual and equipment diagrams should be referenced. This rocker arm stud is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with lawnmowers, blowers, and tillers that have been manufactured by MTD, Yard Machines, Cub Cadet, Bolens, Husky, and Troy-Bilt.

This is a valve adjusting nut that is an integral part of many different types of lawn and garden equipment, such as lawnmowers, trimmers, and snowblowers. The location of the part will vary based on the model. Users can refer to the equipment's diagram to determine where the component is located. The nut acts as a fastener and is made of durable metal. However, it can be damaged, may break, or become lost and will need to be replaced.If the valve adjusting nut is damaged or missing, it will need to be replaced. A pair of work gloves and basic tools will be needed for the process. Take the lawn and garden equipment and place it on a level surface before removing the spark plug wire. Access the location of the nut and remove it before installing the new replacement part.This is a genuine OEM replacement part that is directly sourced from the manufacturer. The valve adjusting nut is sold as an individual item. The part is made to be compatible with snowblowers, lawnmowers, string trimmers, leaf blowers, edgers, log splitters, wood chippers, and tillers manufactured by MTD, Troy-Bilt, Yard Machines, Craftsman, Cub Cadet, Huskee, MasterCut, and Yard-Man.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This replacement part is a stud. This is a genuine replacement part made by MTD. This part is commonly used inside the engine and works with the cylinder to ensure that the different parts in the machine are running smoothly and effectively.A new stud might be needed if the current one is missing or damaged in any way. This can include being dented, cracked, or bent. It is common that after years of normal wear and tear this part can need replacing. Be sure to wear work gloves while replacing this part as other parts around it can cause injuries.Reference the equipment's manual to ensure a proper repair. This stud is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part made for long-lasting use.

This secondary air valve gasket is an OEM replacement part that is sourced directly from the manufacturer for use on lawnmowers and other lawn and garden machines. The secondary valve is commonly known as the idle valve, and this gasket is used to protect the valve from contaminants and to keep the air and pressure at preset levels. If the gasket is worn or torn due to regular use, it will need to be replaced. If the idle on the engine is not functioning correctly, the engine dies when it should be idling, which is a good indicator of a secondary air valve gasket problem. If the engine idles too high, this could be another sign of problems with the gasket. Before replacing the secondary air valve gasket, drain the fuel from the machine and take the spark plug out to prevent accidental engine starting. Use the engine diagram to locate and remove the secondary valve gasket. Install the new gasket and reinstall the parts removed from the engine.This secondary air valve gasket is sold individually. It is compatible with lawnmowers, lawn tractors, and other small engines manufactured by Cub Cadet, MTD, Husky, Troy-Bilt, Yard-Man, and Yard Machines.

This spark arrestor is a genuine MTD part. It is a replacement part for lawn mowers, log splitters, and walk-behind mowers. The spark arrestor is an important safety feature, and it is illegal to sell or operate a machine without one.This part arrests or extinguishes sparks that are created by the engine and other components while the mower is in use. It prevents fires, and mowers should never be used without one.This spark arrestor is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, MasterCut, Bolens, Cub Cadet, Husky, MTD, Troy-Bilt, and Yard-Man.

This genuine replacement part is a self-tapping screw. A self-tapping screw is a small screw that taps into place with relative ease. Lawnmowers have many screws that secure a variety of different parts. Whether they hold the housing of the various mechanical components or are used as mounting screws for other various parts, self-tapping screws are essential in holding all the different parts of the mower together. Over time, self-tapping screws that are exposed to the elements can rust and deteriorate. If they become too damaged, they might no longer do their job effectively and will need to be replaced. Luckily replacing these screws is a very simple process. To replace the screws, simply unthread the damaged screws and replace them with the new self-tapping screws. If the screws are stripped or too corroded to be removed, consider prying them out with a screwdriver or using a pair of needlenose pliers to rotate them out of their position. This OEM part is sold individually and is compatible with MTD brand mowers.

This push rod kit is a genuine MTD part, sold individually. This push rod kit can be used as a replacement part in a lawnmower. This kit comes with a variety of push rods in various shapes and sizes, perfect for the replacement or repair of a push rod within the internal machinery of the lawnmower. The push rods could be dented, punctured, scraped, cracked, warped, or eroded, and if this occurs to the point of reduced or no efficacy, the push rod kit should be ordered as a genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This push rod kit is compatible with the following outdoor appliance brands: MTD, Bolens, Yard-Man, Yard Machines, Troy-Bilt, Cub Cadet, and Husky.