Parts for Mtd 1X65LU: 1X65lu Fuel Tank Parts

This is a carbon canister assembly that is used to make lawn and garden equipment more ecologically friendly. When the engine is turned off, the fuel vapors from the fuel tank and carburetor are asborbed by the charcoal in the carbon canister assembly. It's part of an evaporative emission control system that captures hydrocarbon emissions.If there is a bad odor coming from the fuel, high emission levels, or pinging sounds, this could be an indication that the carbon canister assembly is failing. It can also cause weak performance from the equipment. If the carbon canister assembly isn't working properly, it will need to be replaced. Only basic tools are needed to remove the old carbon canister. The replacement component can be snapped in its place to ensure the equipment is capturing harmful emissions.This carbon canister assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. This part is designed for compatibility with lawnmowers, trimmers, wood chippers, log splitters, string trimmers, and tillers made by MTD, Cub Cadet, and Craftsman.

A carbon canister air filter is an important piece that helps machines operate in accordance with environmental safety standards. This carbon canister air filter is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, tillers, string trimmers, edgers, log splitters, and wood chippers. It is compatible with products by brands such as Craftsman, Cub Cadet, MTD, Huskee, and Yard-Man.The carbon canister air filter part is a crucial device that is found in machines with small engines. The air filter is designed to decrease the amount of air pollution that the machine emits. It is serves the important purpose of increasing the machine's fuel efficiency. The carbon canister air filter traps the vapor the machine releases, but rather than letting it escape the fuel tank, it re-routes it back into the engine.The replacement or repair process of the carbon canister air filter should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This carbon canister filter can be used to replace old filters that are no longer functioning properly. Carbon canister filters need to be replaced regularly in order to ensure outdoor power equipment runs efficiently. Filters are essential for keeping dirt, debris, and harmful materials from ruining an engine. Without carbon canisters, outdoor power equipment can experience decreased fuel efficiency whilst also contaminating the air with more pollutants from the engine. While an engine is running and even after it has been turned off, fuel vapors rise from the fuel tank and pollute the air. Carbon canisters are essential for trapping these vapors and preventing them from being released. Without a clean, well-functioning filter, carbon canisters cannot work efficiently.This carbon canister filter is a genuine replacement part sourced directly from the manufacturer. This replacement carbon canister filter fits various different models of MTD, Cub Cadet, Yardman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers, log splitters, and trimmers. Please note this cover plate is sold individually.

A carbon canister filter cap is an essential piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, tillers, wood chippers, string trimmers, log splitters, and edgers. It is compatible with products by brands such as Craftsman, Cub Cadet, and MTD. This carbon canister filter cap is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. The purpose of the carbon canister filter cap is to prevent harmful fumes or chemicals from entering the environment.The replacement or repair process of the carbon canister filter cap should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This flange bolt is a genuine MTD part. It is manufactured as a replacement part for several different types of machines, including lawnmowers, snowblowers, leaf blowers, log splitters, tillers, wood chippers, and other equipment.A flange bolt is a type of fastener that has a skirt that extends off of the head. There are many locations on these types of machines where a flange bolt is used. The bolts and other fasteners on small engine equipment are typically designed to last for the life of the equipment. However, they may become damaged or stripped during another repair and require replacement. It is a good idea to have extra bolts and other fasteners on hand whenever making repairs to this type of equipment.This flange bolt is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Columbia, Husky, MTD, Craftsman, Remington, Yard-Man, Yard Machines, Mastercut, Cub Cadet, Troy-Bilt, and several others.

Lawn equipment and other machines with small gas-powered engines have fuel tanks that require a fuel tank lower grommet to keep the fuel from leaking. This grommet is located near where the fuel filter and neck meet. With use and over time, the fuel tank lower grommet may wear out or get lost. Leaking fuel is a clear indication that there is a problem with the lower fuel tank grommet. If this occurs, the part will have to be replaced to prevent further leakage and device failure.Before replacing a lower fuel tank grommet, empty the fuel tank completely. Wear gloves for protection. Push the replacement part in the hole and turn slightly to push the piece in. If necessary, use a screwdriver to push in to get a secure fit.This fuel tank lower grommet is an authentic OEM part sourced from the manufacturer. The fuel tank lower grommet is compatible with MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt machines. It can be used in various devices, including lawnmowers, log splitters, trimmers, and other engines. It is made of high-quality material and sold as an individual unit.

This fuel tank upper grommet can be used to easily replace one that has worn out or deteriorated, allowing equipment to run smoothly for longer.Fuel tank grommets are required to ensure fuel does not leak from the area between the fuel filter and the fuel tank. Throughout their life, grommets will experience wear and tear which can easily cause them to weaken. To prevent fuel loss, replace the grommet when it begins to show signs of deterioration. These grommets can easily be replaced at home.This fuel tank upper grommet is an OEM replacement part that has been sourced directly from the manufacturer. This replacement fuel tank grommet is compatible with various different models of MTD, Cub Cadet, Craftsman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers and log splitters. Please note this fuel tank grommet is sold individually.

This fuel tank nut attaches the fuel tank to the rest of the equipment. The fuel tank nut keeps the container from moving around while the device is in motion. The fuel tank nut may wear out or become loose over time, which will cause the fuel tank, itself, to become loose. To continue safe operation, lawn equipment with a worn or broken fuel tank nut should have the part replaced.Empty the fuel from the fuel tank before starting a fuel tank nut replacement project. After locating the fuel tank nut, use the proper tools to loosen and remove the damaged or worn-out fuel tank nut. Attach the new nut to the machine and secure it tightly. Replace the fuel tank.This is a genuine OEM part supplied by the manufacturer. The fuel tank nut is made of high-quality, durable material. The fuel tank nut is compatible with a variety of models of small engines, lawnmowers, log splitters, and trimmers. It is used in several different brands, including MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt. The part is sold as an individual piece.

This fuel cap assembly can be used to easily replace a worn-out or broken fuel cap.Fuel caps have one primary purpose, to keep fuel in the fuel tank and prevent it from spilling or becoming contaminated. This fuel cap is made of top-quality, durable plastic and includes a retainer that fixes to the neck of the tank itself to prevent the cap from becoming detached. Fuel caps are essential, as without them, the fuel in the outdoor equipment machine can easily become filled with dirt and debris that can contaminate the engine and cause more serious problems. This fuel cap assembly is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement fuel cap fits various different MTD, Cub Cadet, Craftsman, and Yards Man models of lawn mowers, log splitters, and trimmers. Please note this fuel cap assembly is sold individually.

This fuel tank is a genuine OEM part sourced from the manufacturer. It is commonly used on chippers, lawnmowers, lawn tractors, and other lawn and garden equipment that is powered by gasoline. The fuel tank is attached to the carburetor with a hose and clamp. The fuel tank has a vented fuel cap to help keep a vacuum from developing in the fuel line. If a vacuum develops, the fuel will not flow from the fuel tank to the carburetor. The fuel tank is made of non-corrosive plastic to prevent deterioration from the fuel.Inspect the fuel tank periodically for signs of deterioration. If there are any cracks or flaws that could become cracks, replace the fuel tank. Leaking fuel not only reduces the performance of the engine but can also be a safety hazard. Before replacing the tank, the fuel should be run dry or pumped out. Remove the spark plug to prevent accidental engine ignition while the fuel tank is replaced. This fuel tank is sold as an individual unit. It is designed for use with lawnmowers, lawn tractors, and many other small engines that are powered by fuel. This fuel tank is compatible with equipment made by MTD, Yard Machines, Yard-Man, Cub Cadet, Troy-Bilt, and Husky.

Fuel filters are created to strain out gas before it reaches the carburetor in lawnmowers and other gardening tools. Located in the fuel line or the fuel tank, it prevents unwanted debris from reaching the carburetor, which can cause engine damage. If the fuel filter is damaged or becomes clogged with material, it no longer offers the same protection to the carburetor. This can lead to difficulty starting the lawnmower and decreased performance. Correcting this issue early can prevent damage that might require a new lawnmower. Maintenance of the lawnmower by adding fuel stabilizer, changing the oil, and replacing the air filter will increase the life of lawn care equioment. Even if no issues are present, the fuel filter should be replaced after about 200 hours of use. Disconnecting the spark plug should be done prior to installing a new fuel filter. This fuel filter is a genuine OEM component directly from the manufacturer and comes as an individual part. It can be used with various Craftsman, Cub Cadet, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and Mastercut lawnmowers, tillers, blowers, and wood chippers.