Parts for Dixon 965882401: 44" Deck Parts

This replacement part is a hex nut. It is a genuine replacement part made by Husqvarna. This part is small yet very important to the overall operation of many different appliances. Hex nuts are able to hold other parts in place and secure them so that everything can operate smoothly. A new hex nut might be needed if the current ones are damaged or missing. The repair should be fairly easy and only require a screwdriver or pliers if the previous part is stuck. It is possible that nuts can become stripped or lodged over time and should be replaced when this occurs. Be sure the engine is completely powered down before starting a repair. This is a genuine OEM replacement part sourced directly from the manufacturer. This nut is sold individually. Be sure to purchase the correct amount as many appliances require more than one.

This shoulder bolt is an authentic OEM replacement part sourced directly from the manufacturer. It is used on many lawn and garden machines to connect parts that rotate or move. The bolt is threaded partway up the shaft, and then the shoulder is smooth. This smooth area allows for rotation. Shoulder bolts can be found on pulleys, gears, rolling wheels, and moving parts of the engine. The bolt's size indicates the shoulder's length, measured from the end of the shoulder to underneath the head. This shoulder bolt has a hexagonal head that requires a hex wrench to remove and replace. The bolt may rust or corrode due to normal wear and tear and exposure to the weather. Constant pressure due to moving parts may also cause the bolt to be worn down. During routine inspections, if the bolt is found to be worn, it should be removed and a new one installed. This shoulder bolt is a heavy-duty gold-colored part that is sold individually. This shoulder bolt is designed for use on all outdoor lawn and garden machines that require a 1/2C x 2/ ¾ inch shoulder bolt.

This part is a replacement idler pulley. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective idler pulley in a variety of outdoor power equipment models.The idler pulley is an essential component of equipment and thus needs to be replaced if dented, bent, or in any way broken. Disconnect spark plugs before replacing this part. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this idler pulley, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this idler pulley is suitable for use on several different models of outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This deck belt spring is a genuine Husqvarna part, sold individually. This deck belt spring can be used as a replacement part for a lawnmower. This deck belt spring maintains the placement of the mower deck v-belt, or drive belt, through spring tension.The deck belt spring might have to be replaced if it can no longer hold the v-belt in place. If the spring is lost, misplaced, or has been stripped over time from general wear and tear or as the result of a direct impact with a hard object, the deck belt spring will have to be removed and replaced with this genuine OEM replacement part before using the lawnmower again. This is an OEM part sourced directly from the manufacturer. It is sold individually. This deck belt spring is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, and Jonsered.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower. The purpose of the nut in a lawn mower is to serve as a fastening component within the internal mechanisms of the appliance, in conjunction with a bolt, to keep one or more components in their stable placement.The nut in a lawn mower might be subject to damage during the typical lifespan of the appliance that could render the nut beyond functionality. The nut can also be easily lost or misplaced during the lifespan of the appliance as it is a small component that can disappear without necessarily notifying the user of the appliance of its absence. If the nut is lost, misplaced, or sufficiently damaged to the point of reduced or no functionality, the nut should be replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This nut is compatible with products from Husqvarna.

This part is a nyloc nut. This specific nut is used in many different applications depending upon the outdoor power equipment machine that it is used on. This nut has a nylon collar insert that resists turning when it has been threaded on correctly. The nyloc nut is a type of lock nut, which prevents loosening when it's exposed to vibrations. It helps fasten parts together.A new nyloc nut may be needed if the original one has been broken, damaged, or lost. If the nyloc nut is no longer staying in place when it is exposed to vibrations and the operator can notice the parts loosening, then the nyloc nut will need to be replaced.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This nyloc nut is used on snowblowers that are manufactured by both Husqvarna and Craftsman.

This is a single washer for use with an assortment of lawn and garden equipment. The location of the washer will vary by tool and model. It's made of durable metal and can be used to distribute pressure across another component or can be used to add spacing between two parts. Since washers are small and experience a great deal of pressure, they can become damaged or even lost. If this occurs, other parts will make contact and pressure may not be appropriately distributed in a piece of lawn and garden equipment. If a replacement is needed, locate the area with the washer. Disassemble as needed to visually inspect the part. The washer can be removed by hand or with the help of a flathead screwdriver to pry it up. Replace the original washer with the replacement part and reassemble the equipment. The washer is priced as a single unit and is directly sourced from the manufacturer. It is an authentic OEM replacement component. It's compatible with a variety of string trimmers, tillers, snowblowers, and lawn mowers manufactured by Weed Eater, Husqvarna, and Craftsman.

This flat washer is a genuine Husqvarna part, sold individually. This flat washer can be used as a replacement part in a lawn mower. The purpose of the flat washer in a lawn mower is to function within the fastening mechanisms of an appliance by fitting onto a bolt or a screw so that the spacing between one or more components is maintained while also reducing friction between those components.The washer can be easily lost or misplaced during the operation of the appliance as it is a small component that does not serve a critical function. The flat washer can also be punctured, dented, warped, or eroded over time, in which case it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This flat washer is compatible with the following outdoor appliance brands: Husqvarna.

This genuine replacement Husqvarna carriage bolt can be used in the infrastructure of several different kinds of appliances that require small engines, including lawn mowers, leaf blowers, lawn tractors, line trimmers, snowblowers, wood-chippers, and generators. Carriage bolts are distinguished by their round heads and flat tips. Their function as a fastener, in conjunction with nuts, is to attach materials or components to one another, wood and metal components in particular. There are several reasons that a carriage bolt might have to be replaced, including misplacement of a carriage bolt, as the part is relatively small and can disappear without immediate consequence. Other reasons to replace a carriage bolt can include damage from overuse, exposure, or age; this damage can manifest in the form of visible erosion, cracking, or piercing that prevents the carriage bolt from properly fastening materials to one another. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carriage bolt is compatible with the following brands: Husqvarna, Poulan, and Craftsman. Part sold individually.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a lawn mower.The screw in a lawn mower might eventually have to be replaced if it is lost, misplaced, or stripped away from general wear and tear with long-term use. The screw is a small component that can be lost or misplaced; if this occurs, the screw should be replaced by this genuine OEM replacement part. The screw can also be damaged over time, and if its damage results in the loosening of the components to which it was affixed, the screw should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower or an edger. The purpose of a nut in a lawn mower or an edger is to secure one or more components to a certain spot within the internal machinery of the appliance in conjunction with a bolt.A nut could be easily lost or misplaced as it is a very small component that can fall off or disappear from its area of placement; if this occurs, the nut should be replaced by this genuine OEM replacement part. The nut could also suffer from puncturing, denting, cracking, chipping, warping, or eroding that can mandate its removal and replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.