Parts for Husqvarna 968999764: 48" Cutting Deck Parts

This replacement part is an idler pulley intended for use in lawn mowers. This is a genuine replacement part made by Husqvarna. Idler pulleys connect wiring inside the machine. Idler pulleys spin as the machine is powered on and aid in moving different belts so that the appliance is able to function properly. A new idler pulley might be needed if the current one is worn down or broken in any way. It is possible that the pulley can be stripped down overtime and not function as efficiently as when brand new. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by Husqvarna.

This replacement part is an idler spindle, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is commonly found in lawn mowers and assists the user in turning the machine in different directions. The idler spindle allows for smooth turns and maneuvers during use. A new idler spindle might be needed if the current ones are damaged or broken in any way. It is possible for this part to become worn down or stripped overtime due to normal wear and tear. If the user noticed that the machine is not turning as smoothly or is unable to rotate the steering of the appliance, it might be time to replace the idler spindle. This replacement part is an OEM part sourced directly from the manufacturer. This idler spindle is sold individually. Be sure to purchase the correct amount as some appliances require more than one.

This replacement part is a hex nut. It is a genuine replacement part made by Husqvarna. This part is small yet very important to the overall operation of many different appliances. Hex nuts are able to hold other parts in place and secure them so that everything can operate smoothly. A new hex nut might be needed if the current ones are damaged or missing. The repair should be fairly easy and only require a screwdriver or pliers if the previous part is stuck. It is possible that nuts can become stripped or lodged over time and should be replaced when this occurs. Be sure the engine is completely powered down before starting a repair. This is a genuine OEM replacement part sourced directly from the manufacturer. This nut is sold individually. Be sure to purchase the correct amount as many appliances require more than one.

This spring is a genuine Husqvarna part, sold individually. This spring can be used as a replacement part in a lawn mower. The purpose of the spring in a lawn mower is to secure one or more components while allowing those components to have a range of motion within the internal mechanisms of the appliance.If the spring is permanently damaged, it should be removed and replaced by this genuine OEM replacement part. This replacement is a simple process that will require only basic tools to execute.This is a genuine OEM from the manufacturer. It is sold individually. This spring is compatible with the following outdoor appliance brands: Husqvarna.

This part is a replacement hexagon screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current hexagon screw is broken, misplaced, or in any way damaged, this part can be used as a replacement. It is intended for use with outdoor power equipment.Hexagon screws are a standard piece of hardware that get their name from the hexagonal shape of the screw head. They have multiple different uses. Screws are critical for properly securing parts of the equipment, and may require replacing if stripped, corroded, lost, or otherwise defective. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this hexagon screw, the appropriate owner's manual and equipment diagrams should be referred to. This hexagon screw is suitable for use on outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. This part is sold individually.

Flat washers have multiple applications in lawn mowers and tractors, but are used to add additional security to various screws and bolts. These are made of durable metal, but they can still become worn or damaged over time. The flat washer is a useful part that needs to be in working order at all times for the most effective operation of your lawn equipment. In some cases, they can become lost or damaged during other maintenance. Replacing them is easy with this OEM flat washer. Refer to the user manual for various applications and locations of this washer, as each unit will have its own specifications. Always follow manufacturer instructions for installing hardware like this flat washer replacement. This genuine OEM washer is manufactured to exact standards by Husqvarna. It is designed to be used with several brands of lawn and garden equipment engines, including Weed Eater, Husqvarna, Poulan, Poulan Pro, Craftsman/Sears, and Roper. The part is silver in finish and is sold individually. Order multiple quantities as needed.

This replacement part is a torsion spring. This is a genuine replacement part made by Husqvarna. This part works within a machine to provide torque to different parts so that the machine can run smoothly and properly. A new torsion spring might be needed if the current one is missing or damaged in any way including being dented or bent. Because of the nature of the spring, this part could snap under pressure and need to be replaced. Work gloves are recommended during this repair as springs can be dangerous if handled improperly. Be sure the engine is off before starting this repair as running parts may affect the installation.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This is a push nut that is used in many different models of lawnmowers. It's a black nut made of durable metal. The push nut is used to secure various components in several locations on lawn and garden equipment. This component is made of strong materials but it can experience damage, wear and tear, or even break over time. This can cause the lawnmower to perform poorly or experience other issues. This is a small component that can be broken or lost and needs to be replaced to ensure the best performance from the lawnmower. A set of pliers and a screwdriver may be required to replace the push nut. The parts that will need to be removed before replacement vary based on the location of the push nut. Disassemble any components in the way before taking out the bad or damaged push nut. Place and tighten the new nut and reassemble the parts.This is a genuine OEM replacement push nut that is directly sourced from the manufacturer. It is sold as an individual component. The push nut is created for use with lawnmowers manufactured by Craftsman, Husqvarna, Weed Eater, Poulan, Murray, Ariens, and Dixon.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This replacement part is a deck belt intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Deck belts link various rotating shafts to ensure that the entire machine is running smoothly and efficiently. A new deck belt might be needed if the current one is damaged or broken in any way such as being split or torn. The user might be able to tell when the deck belts are malfunctioning if there are noises coming from the machine that are not typical. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.

This part is a nyloc nut. This specific nut is used in many different applications depending upon the outdoor power equipment machine that it is used on. This nut has a nylon collar insert that resists turning when it has been threaded on correctly. The nyloc nut is a type of lock nut, which prevents loosening when it's exposed to vibrations. It helps fasten parts together.A new nyloc nut may be needed if the original one has been broken, damaged, or lost. If the nyloc nut is no longer staying in place when it is exposed to vibrations and the operator can notice the parts loosening, then the nyloc nut will need to be replaced.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This nyloc nut is used on snowblowers that are manufactured by both Husqvarna and Craftsman.

This washer is a genuine Husqvarna part, sold individually. This washer can be used as a replacement part in a lawn mower. The purpose of the washer in a lawn mower is to serve as a small fastening component that can reduce the friction between two or more components.The washer in a lawn mower can be easily lost or misplaced during the operation of the appliance as it is a particularly small component that can go missing without alerting the operator of its absence. If this occurs, the washer should be replaced by this genuine OEM replacement part. Additionally, the washer can be subject to stripping over time, in which case it should also be immediately replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This washer is compatible with the following outdoor appliance brands: Husqvarna and Dixon.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower or an edger. The purpose of a nut in a lawn mower or an edger is to secure one or more components to a certain spot within the internal machinery of the appliance in conjunction with a bolt.A nut could be easily lost or misplaced as it is a very small component that can fall off or disappear from its area of placement; if this occurs, the nut should be replaced by this genuine OEM replacement part. The nut could also suffer from puncturing, denting, cracking, chipping, warping, or eroding that can mandate its removal and replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.