Parts for Mtd 5X65RU: 5X65ru Cylinder Head Parts

This flange bolt is a genuine MTD part, sold individually. This flange bolt can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, string trimmers, leaf blowers, edgers, log splitters, wood chippers, and tillers. The purpose of a flange bolt is to serve as a fastening component, in conjunction with a nut, so components can be secured and affixed to one another over time.The flange bolt might have to be replaced at some point within the standard lifespan of the appliance if it is lost, misplaced, or damaged. The flange bolt can be gradually stripped over time, in which case it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This flange bolt is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Cub Cadet, Craftsman, Yard-Man, Yard Machines, MasterCut, and Huskee.

This cylinder head service kit is used to maintain and repair a cylinder head that is worn out or broken. It comes with various small parts that may need to be replaced in the cylinder head. In lawn and garden equipment the cylinder head is located on top of the engine and ensures the combustion chamber is closed. It also keeps the cylinder lubricated so the machine can work at its best. A cylinder head that is damaged or worn out may create overheating, oil leaks, excess smoke, or poor engine performance.Depending on the tool and the part that is worn out within the cylinder head, several tools may be needed to make the replacement. Before replacing any of the components, the tool should be turned off with the spark plug wire disconnected.This cylinder head service kit is a genuine OEM replacement kit with parts that can be used to repair an ailing cylinder head. It is sold as an individual kit. This service kit is designed to be used with lawnmowers, string trimmers, edgers, log splitters, and wood chippers manufactured by MTD, Craftsman, and Cub Cadet.

This cylinder head is made for use in many types of lawn and garden equipment. The cylinder head is located on top of the engine in the machinery. It is tasked with making sure the combustion chamber is sealed shut. The gap between the engine and the cylinder head will be filled using a head gasket. Another responsibility of the cylinder head is ensuring the cylinder is constantly lubricated. If the cylinder head isn't working, it may cause low oil levels, lowered engine performance, and exhaust smoke.To inspect the cylinder head, the grass shield and screen should first be removed. Remove the engine cover by taking out all of the bolts that secure it. Remove the engine shroud and the bolts that connect the head to the pump bracket. The cylinder head will be located under the valve cover. Remove it and install the replacement part before using the tool.This cylinder head is an authentic OEM replacement part sourced directly from the manufacturer. It is sold individually. The cylinder head is created to be compatible with lawnmowers, string trimmers, edgers, log splitters, and wood chippers manufactured by MTD, Cub Cadet, and Craftsman.

The spark plug takes in power from the battery and generates the spark that will keep the combustion engine running. Spark plugs need to be replaced annually as a part of regular maintenance. In the event that the engine is not idling correctly or keeps stopping and starting, the spark plug may need to be replaced immediately. This is a simple replacement that involves removing the spark plug boot and taking out the old plug, then screwing in the new plug, and replacing the boot. The spark plug requires an open-ended wrench or special spark plug socket to replace. This OEM spark plug replacement is made by MTD and is compatible with edgers, lawnmowers, log splitters, trimmers, and other garden engines. It can be used on compatible Craftsman, Cub Cadet, and MTD engines. This unit is sold as a single plug.

This part is a replacement rocker arm stud. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken or defective rocker arm stud on various types of outdoor small engine power equipment. This rocker arm stud works by securing the cylinder head. The rocker itself slides over the stud and is then held securely by the nut that locks it into place. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this rocker arm stud, the appropriate owner's manual and equipment diagrams should be referenced. This rocker arm stud is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with lawnmowers, blowers, and tillers that have been manufactured by MTD, Yard Machines, Cub Cadet, Bolens, Husky, and Troy-Bilt.

This is a valve adjusting nut that is an integral part of many different types of lawn and garden equipment, such as lawnmowers, trimmers, and snowblowers. The location of the part will vary based on the model. Users can refer to the equipment's diagram to determine where the component is located. The nut acts as a fastener and is made of durable metal. However, it can be damaged, may break, or become lost and will need to be replaced.If the valve adjusting nut is damaged or missing, it will need to be replaced. A pair of work gloves and basic tools will be needed for the process. Take the lawn and garden equipment and place it on a level surface before removing the spark plug wire. Access the location of the nut and remove it before installing the new replacement part.This is a genuine OEM replacement part that is directly sourced from the manufacturer. The valve adjusting nut is sold as an individual item. The part is made to be compatible with snowblowers, lawnmowers, string trimmers, leaf blowers, edgers, log splitters, wood chippers, and tillers manufactured by MTD, Troy-Bilt, Yard Machines, Craftsman, Cub Cadet, Huskee, MasterCut, and Yard-Man.

This replacement part is a stud. This is a genuine replacement part made by MTD. This part is commonly used inside the engine and works with the cylinder to ensure that the different parts in the machine are running smoothly and effectively.A new stud might be needed if the current one is missing or damaged in any way. This can include being dented, cracked, or bent. It is common that after years of normal wear and tear this part can need replacing. Be sure to wear work gloves while replacing this part as other parts around it can cause injuries.Reference the equipment's manual to ensure a proper repair. This stud is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part made for long-lasting use.

This is a muffler gasket that is located between the engine exhaust and the exhaust system in various types of lawn and garden equipment. When the muffler gasket is in good shape, it prevents exhaust from leaking out of the tool. It comes with a substantial amount of flexibility so that it can expand in the presence of heat. The main task of the muffler gasket is to prevent leaking. If the gasket is damaged or broken, the exhaust may leak from the joint.A muffler gasket can fail due to many situations. It can dry out, lose its flexibility, or develop cracks or holes. Sometimes the muffler gasket will chafe and lose its resistance to heat so it dries out. Muffler gaskets can also tear due to the intense vibrations from equipment. The gasket will need to be replaced by taking out the engine and switching the muffler gasket for a new one.This is a genuine OEM replacement muffler gasket that is sourced directly from the manufacturer. It is sold as an individual part. The gasket can be used in lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, and MTD.

This part is a choke temperature control thermostat that is used on engines and lawnmowers. A choke temperature control thermostat is a standard component in outdoor power equipment that has a carburetor and ignition coil system. The purpose of the choke temperature control thermostat is to control the idle of the machine.A new choke temperature control thermostat may be needed if the original has burnt out. This component is especially susceptible to heat damage. If the choke temperature control thermostat is cracked, broken, or damaged in any way, this would warrant replacing the part as soon as possible. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This choke temperature control thermostat is a genuine MTD part. It is sold individually. This particular choke temperature control thermostat is compatible with engines and lawnmowers that are manufactured by MTD, Yard-Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This genuine replacement part is a muffler assembly for use with a lawn mower. The muffler is an essential part for the safe and reliable operation of a lawn mower. A muffler can help minimize the sound of the lawn mower engine. Additionally, it can help prevent exhaust sparks from exiting the mower and igniting dry grass, leaves, or debris. It can also help improve fuel economy of the mower. The main signs that a muffler may need to be replaced are a change in operating volume, lower fuel economy, or a bad odor during operation. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench may be needed for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair. Perform repairs only in a well ventilated area.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with MTD, Yard Machines, Yard Man, Cub Cadet, Husky, Troy-Bilt, and more lawn mowers. Please note: original part number 751-14429 is now obsolete, and manufacturer has replaced the original part number with this part.

This is a high-quality muffler shield that can be used on many types of lawn and garden equipment. The muffler shield encloses and protects various small engine mufflers. This part is used to reduce the radiant heat coming from the motor. It also protects the muffler from damage from impact, dirt and debris, or other things. Each muffler shield is made of durable metal but can be damaged over time through ordinary use.If the muffler shield is malfunctioning or broken or the muffler doesn't come with a shield, a replacement can be used to rectify the issue. A wrench will be needed to remove the bolts on the old heat shield so the new one can be installed. Only make the replacement when the engine is cold. The spark plug wire should be disconnected before replacing this part in lawn and garden equipment.This muffler shield is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The muffler shield is designed to be used with lawnmowers, tillers, string trimmers, edgers, wood chippers, and log splitters manufactured by MTD, Craftsman, and Cub Cadet.

This is a cylinder head gasket that is located between the cylinder head and the engine block on many types of lawn and garden equipment. It is responsible for sealing the internal combustion process. It prevents oil and coolant from mixing together while each moves to the cylinder head from the engine block. If the cylinder head gasket is broken or damaged, it can cause fouled spark plugs, white smoke, milky white oil, leaking coolant, or an overheating engine.Gaskets can crack or wear out over time, which requires the parts to be replaced. Some of the tools needed to make the replacement include a gauge, socket driver, Torx screwdriver, nut driver, screwdriver, torque wrench, hex bit, and spark plug wrench. Make sure to wear work gloves and do the replacement with the tools on a flat surface.This cylinder head gasket is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The head gasket is designed for use with lawnmowers, string trimmers, tillers, edgers, log splitters, and wood chippers created by Cub Cadet, Craftsman, and MTD.

This push rod kit is a genuine MTD part, sold individually. This push rod kit can be used as a replacement part in a lawnmower. This kit comes with a variety of push rods in various shapes and sizes, perfect for the replacement or repair of a push rod within the internal machinery of the lawnmower. The push rods could be dented, punctured, scraped, cracked, warped, or eroded, and if this occurs to the point of reduced or no efficacy, the push rod kit should be ordered as a genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This push rod kit is compatible with the following outdoor appliance brands: MTD, Bolens, Yard-Man, Yard Machines, Troy-Bilt, Cub Cadet, and Husky.

This is a metal tappet that is used with many types of lawn equipment with small motors. The tappet is a component that attaches to the push rod. Tappets take the rotating motion provided by the camshaft and transfer it into linear motion so the valves operate properly. Over time, the tappet can break or become damaged and will require replacement.When replacing a tappet, users will need a set of pliers. It's best to wear work gloves during the process and make sure the spark plug wire is disconnected. Items like the mufflers, crankcase breather, and other parts will need to be removed to access the tappet. A visual inspection of the tappets can be done by removing them from the engine to check for damage. Remove the old tappet and replace it with a new part.This tappet is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The tappet is made for use with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, Yard-Man, and MTD.

This spark arrestor is a genuine MTD part. It is a replacement part for lawn mowers, log splitters, and walk-behind mowers. The spark arrestor is an important safety feature, and it is illegal to sell or operate a machine without one.This part arrests or extinguishes sparks that are created by the engine and other components while the mower is in use. It prevents fires, and mowers should never be used without one.This spark arrestor is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, MasterCut, Bolens, Cub Cadet, Husky, MTD, Troy-Bilt, and Yard-Man.

This genuine replacement part is a self-tapping screw. A self-tapping screw is a small screw that taps into place with relative ease. Lawnmowers have many screws that secure a variety of different parts. Whether they hold the housing of the various mechanical components or are used as mounting screws for other various parts, self-tapping screws are essential in holding all the different parts of the mower together. Over time, self-tapping screws that are exposed to the elements can rust and deteriorate. If they become too damaged, they might no longer do their job effectively and will need to be replaced. Luckily replacing these screws is a very simple process. To replace the screws, simply unthread the damaged screws and replace them with the new self-tapping screws. If the screws are stripped or too corroded to be removed, consider prying them out with a screwdriver or using a pair of needlenose pliers to rotate them out of their position. This OEM part is sold individually and is compatible with MTD brand mowers.