Agway Parts

This is a genuine replacement self-tapping hex screw with a blunt nose designed for lawn mowers and lawn tractors. It is used in a variety of locations for the engine assembly of lawn mowers. The self-tapping feature allows the metal screw threads to tightly secure to other metal. The blunt nose requires the use of a pre-drilled pilot hole smaller than the diameter of the screw. These screws do not interchange well. Be sure to check the owner's manual to ensure the correct part number. The hex head needs a socket wrench for the easiest removal and replacement. When removing this type of screw, stripped threads can occur. If this happens, use a screw of the same type in a slightly larger size to accommodate for the damage. Typically, this type of screw would need to be replaced when removed to access another part of the lawn mower for replacement, such as the carburetor. This an OEM part sourced directly from the manufacturer and is sold individually. This screw fits products by Bolens, Brute, Columbia, County Line, Craftsman, Cub Cadet, Huskee, Huskee Supreme, MTD Black, MTD Gold, Mastercut, Murray, Troy Bilt, Yard Man, & Yard Machines.

With small gasoline-powered tools that require control panels, this hex screw attaches the panel to the handles of the tools. Machined to be durable, important screws such as these take a real beating. In their locations at critical points on the handle, the hex screws are considered "wear items," and thus periodically, they must be replaced. The control panel itself is often a location of extreme forces, jostling, and abrupt movement in unpredictable directions. The constant movement, with sheet metal rubbing against the hex screws from every direction, make wear inevitable. The manufacturers recommend that spare screws of this type be kept on hand if the heavy use of the equipment is expected. Among the gasoline-powered tools that use these screws are snowblowers, yard tractors, mowers, tiller, chippers, shredders, and other tools requiring hand-maneuvered levers. These screws are compatible with a number of equipment brands and manufacturers, including MTD, Ryobi, Poulan, Yard-Man, Bolens, Troy-Bilt, and Yard Machines.

Replacement hex bolt for lawn mowers and outdoor power equipment. Secures components throughout the machine. Replace when stripped, broken, or missing.

Hex bolt fastener for lawn mowers and outdoor power equipment. Replace this bolt if cracked, stripped, or missing to secure engine and frame components.

Hex lock nut for lawn mowers and outdoor power equipment. Secures blade assemblies, wheels, and components. Replace if stripped, corroded, or missing.

Fastening nut for lawn mowers, tillers, and outdoor power equipment. Secures components when used with a bolt. Replace if stripped, corroded, or missing.

Speed nut fastener for lawn mowers and tractors. Secures components in place. Replace if missing, damaged, or worn from regular use or impact.

This is a flange nut that can be used in a variety of lawn and garden equipment from different manufacturers. The nut is made of metal, measures 5/16x18, and is used to secure components in place. It also assists with preventing backing out caused by vibration. Over time, the flange nut can become damaged and will need to be replaced. If the flange nut in lawn and garden equipment has become damaged, is loose, or gets lost, then replacement is required. The level of difficulty of replacing a flange nut depends on which parts it's securing and what kind of equipment it is installed on. This flange nut is an OEM replacement part that can be used with lawn mowers, snowblowers, wood chippers, tillers, log splitters, leaf blowers, and edgers by MasterCut, Craftsman, Yard-Man, Toro, Bolens, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold individually and will require a wrench or socket for installation.

Fix transmission engagement issues with this right actuating arm. Controls clutch and brake operation on lawn tractors. Direct-fit replacement part.

Miter gear for garden tractor transmission systems. Replaces worn, stripped, or broken gears that cause grinding or mechanical failure in the drive assembly.

Fix tiller transmission issues with this 17-tooth spur gear. Restores power transfer when gears slip or grind. Fits most rear-tine tiller models.

This clutch collar is an authentic OEM part sourced directly from the manufacturer for use in lawnmowers and lawn tractors. If there are problems with the lawnmower jerking and sputtering after changing gears, the clutch collar should be removed and replaced to keep the lawnmower running properly. The clutch collar is part of the clutch bearing. The clutch collar is used between bevel gears as spacers and allows them to move in sync with the pinion gear. If the clutch collar is deteriorated, broken, or missing, a new one should be installed.Make sure the lawnmower is on a flat surface. Remove the spark plug and disconnect the battery. A screwdriver, pliers, socket set, wrench set, and nut driver are required to make this repair. Take the transmission out of the lawnmower. Open the case on the transmission and remove the broken clutch collar. Install the new clutch collar. Reverse the process to reassemble the lawnmower. This clutch collar is a high tensile metal part that is sold individually. It is designed for use in lawn tractors manufactured by Craftsman.

This is an upper housing that is used with many models of lawnmowers and lawn tractors. The part is made of durable metal and has the responsibility of protecting many of the interior parts of the lawnmower. Over time, the upper housing can be damaged or may break. It can also be lost and will need to be replaced with a new OEM component. If the housing is damaged or cannot be found, the part should be replaced.Basic tools like a screwdriver and socket may be needed for this project process. A pair of work gloves will also be useful for the process. Before replacing the upper housing, make sure the lawnmower is placed on a sturdy surface and in the off position. The spark plug wire should be disconnected for safety reasons. Use the tools to remove the old damaged part from the lawnmower before installing the new one in its place.This upper housing is designed to compatible with lawnmowers and lawn tractors manufactured by Montgomery Wards, MTD, Ryobi, and Yard Machines. It is an authentic OEM replacement part that is directly sourced from the manufacturer. This component is sold individually.

Seals the gear case to prevent oil leaks in your tiller. Replace when worn, cracked, or leaking. Verify fit with your model number before ordering.

Counterweight for rear-tine tillers that balances the machine during operation. Replace if cracked, broken, or missing to restore proper weight distribution.