Parts for Briggs & Stratton 122132-0110-E8: Air Cleaner, Controls, Exhaust System, Governor Spring, Ignition Parts

This is a high-quality metal air cleaner base that is designed to be used on wood chippers and tillers. The purpose of the air cleaner base is to keep the air filter element secure and protected. It also fastens to the carburetor. This air cleaner base comes with the base, a screw, and a composite gasket to seal the part to the tool. Through use, the air cleaner base can become damaged or worn out and will need to be replaced to keep the air cleaner secure and protected.When replacing the air cleaner base, the only tool required is a screwdriver. Turn off the lawn and garden equipment and remove the spark plug wire. Use the screwdriver to remove the air filter cover from the carburetor. A new air filter cleaner can be installed in the same location. Make sure to tighten the screws and replace the spark plug wire before use.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The air cleaner base is designed for use with tillers and wood chippers manufactured by Briggs & Stratton, Simplicity, and Snapper.

An air cleaner gasket is a valuable barrier between the carburetor of a machine and the air filter. This air cleaner gasket is made out of durable composite material. It is designed for use with outdoor lawn and garden power equipment such as lawn mowers, snowblowers, tillers, leaf blowers, and wood chippers. It is compatible with products by brands such as Briggs & Stratton, Toro, Cub Cadet, Snapper, and Simplicity.The air cleaner gasket part is crucial to the health and longevity of the machine's engine. The purpose of the air cleaner gasket is to help seal and protect the engine, the air cleaner, and other internal systems from dirt, contaminants, and debris that can often become the source of engine problems.The proper gasket for each user's engine depends entirely on the engine's design. That's why it is strongly recommended that users check their engine's Illustrated Parts List and refer back to their owner's manuals before making any decisions. This air cleaner gasket is an original OEM part sourced directly from the manufacturer, Midwest Engines. It is sold individually.

The stop switch, sometimes called a kill switch, is triggered to stop the engine when the operator is no longer on the seat ,This is important for safety. If the stop switch is not functioning properly, inspect it for damage and replace it right away. Operating a machine without a functional stop switch can be dangerous. The stop switch is a genuine OEM part, and it is sold individually. The switch can work for many types of equipment including lawn tractors, lawnmowers, log splitters, wood chippers, pressure washers, and tillers. The replacement part is compatible with a range of brands, including Midwest Engine, Toro, Craftsman, Briggs & Stratton, Lawn-Boy, Murray, Snapper, and MTD.

This genuine OEM replacement part is a spark plug terminal for a wide variety of small combustion engines. In a combustion engine, the spark plug generates a small electrical charge that creates enough power to start up the ignition and engage combustion. The plug connects to the ignition through the terminal. Spark plugs generate and then pass a small electrical current through to the ignition. Usually, the main issue with spark plugs is that this current hyper-extends and ends up frying the spark plug. However, if the terminal is damaged, the charge will not pass into the ignitor, and the engine will not turn. If the spark plug can carry a charge but the engine still won't turn, it's likely the terminal that needs replacing. This is an easy repair because the terminal should just snap on and off. If stuck, a pair of needle-nose pliers should make it easier. This high-quality replacement part is compatible with engines from Murray, Toro, Lawn Boy, and Briggs & Stratton. It is sourced from the original manufacturer and ships individually.

This exhaust gasket is a genuine Midwest Engine replacement part for appliances that use small engines, such as chipper shredders, snowblowers, leaf blowers, and lawn mowers. The function of an exhaust gasket is to seal off the carburetor from the exhaust tube in order to protect the engine from the accumulation of dirt, debris, and gunk within the inner workings. The exhaust gasket may require replacement over time from general wear and tear. If the exhaust gasket is not sealing, allowing dirt and debris to accumulate within the carburetor and leaving the exhaust tube exposed, the part should be replaced immediately. Evidence of a damaged exhaust gasket could also manifest in the form of oil leakage, black smoke arising out of the exhaust tube, and unusually low pressure from the combustion when using the appliance. Any of these symptoms can be attributable to multiple factors, so one should assess if the exhaust gasket is responsible before ordering a replacement.This exhaust gasket is compatible with the following brands: Briggs and Stratton, Cub Cadet, Toro, and Simplicity. This part sold individually.

This replacement part is a screw. It is a genuine replacement part made by Midwest Engine. Screws are found in many different types of appliances and machines. These parts are important in holding different pieces together so that the user is able to operate the appliance effectively. A replacement screw might be needed if some parts of the appliances are loose or missing. Screws can become stripped over time. If this is the case it is recommended that they be replaced as soon as possible. The repair for this screw is simple and will most likely require a screwdriver and perhaps pliers if the previous part is lodged in place. This screw is made of durable metal. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This is a genuine OEM replacement part.