Parts for Briggs & Stratton 12E602-0135-E1: Air Cleaner, Controls, Exhaust System, Flywheel Brake, Governor Spring, Ignition Parts

This is a genuine intake gasket replacement that is designed for use in certain lawn mower engines. This specialty intake gasket is what is responsible for creating the seal between the carburetor and the breather tube so that no gases or fluids leak when they pass between the two. This gasket is subjected to constant high pressure, vibrations, and extreme temperatures, and over time it will need replaced. Gaskets are generally considered a part of routine maintenance on most engines, and many owners will choose to keep a few extra on hand in case of an urgent repair need. This genuine OEM intake gasket is manufactured by Briggs & Stratton and designed to offer an identical replacement for the original gasket that came on the new unit. It is compatible with lawn mower engines in models from Briggs & Stratton and Toro, and will fit on over 150 different engine models in lawn mowers from these brands. The intake gasket is made of durable composite material. It is also a good idea to replace gaskets when servicing the carburetor to ensure a proper seal after reassembly. Be sure to use the right tools to install this part so that it isn't damaged in the process.

This is a genuine OEM air cleaner gasket replacement sourced directly from the manufacturer. This gasket provides the seal between the carburetor and air filter on various lawn and garden engines. The seal is essential to engine performance. If dirty air or too much air gets into the carburetor, the ratio of fuel to air will be off and the engine may misfire, not run at all, or die during operation. Normal use of outdoor machinery will produce wear and tear on the air cleaner gasket that cannot be seen during operation. It isn't until the engine runs badly that the worn gasket is discovered. This is remedied by including the air cleaner gasket in regularly scheduled maintenance. Before changing the air cleaner gasket, make sure the engine is cool. Severe burns can happen if the engine is still hot. Wear gloves while making repairs as an added layer of protection. Remove the air cleaner cover and air filter to access the gasket. Remove the gasket and clean behind the gasket. Install the new gasket, making sure the part is flat. Reinstall the air filter and cover. This air cleaner gasket is sold individually. This gasket is compatible with small engines manufactured by Briggs & Stratton and Cub Cadet.

This is a screw that is used in many types of lawn and garden equipment, including lawnmowers and wood chippers. It comes with a black finish and is made of durable metal. The screw can be used in many locations on a tool to attach two components together. Screws can also be used in tandem with nuts, but the two components should have the same threading and finish.Screws can become damaged, break, or be stripped and will need to be replaced. Corrosion, extreme temperatures, and unexpected stress can all lead to issues with a screw. A visual inspection can indicate whether the screw should be replaced. If it does need replacement, a screwdriver can be used to remove the original screw. The new component can be placed and tightened.This screw is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as a single component. The screw can be used with many types of lawn and garden equipment, including lawnmowers, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and snowblowers manufactured by Briggs & Stratton, Cub Cadet, Craftsman, Murray, Wheel Horse, Lawn-Boy, MTD, MasterCut, Simplicity, and Toro.

This is replacement air cleaner screw is compatible with a range of different types of lawn and garden equipment that have air cleaners. The screw is used to ensure the air cleaner is properly fastened to the machine. Without the screw, the air cleaner would not stay in place. The air cleaner screw could suffer damage in a range of ways. It might simply be from wear and tear or corrosion from the elements. In addition, it could have been damaged or the threads could have become stripped. If the threads are damaged, it will not hold properly. The air cleaner screw could have been lost, as well. In any of these instances, the owner will want to replace the screw. This is a genuine OEM replacement air cleaner screw that is sold individually. The screw can be used with pressure washers, wood chippers, chainsaws, leaf blowers, lawn mowers, and other small engines with an air cleaner. Compatible brands include Craftsman, Briggs & Stratton, Toro, Cub Cadet, Homelite, Murray, Simplicity, Lawn-Boy, and MTD.

This filter is used for lawn and garden equipment. A dirty or clogged filter could cause the engine to run poorly.

The breather tube is responsible for filtering out exhaust gases from the crankcase. It has special fibers in the tube to remove contaminants as it moves the exhaust gases through the ventilation valve and out into the air. The tube also helps ensure that the engine air stays cool for optimal performance. This rubber tube can become dry and cracked over time, or it could be damaged due to an incident or impact. In any case, the tube should be fully replaced when it is not functional to ensure optimal performance at all times. This genuine OEM breather tube is manufactured to exact standards and made by Briggs and Stratton. It is compatible with select engines on more than 150 lawn mowers and generators from Toro, Briggs & Stratton, and Lawn Boy. This replacement tube is made of high-quality materials and sold as an individual part. No hardware or other parts are included with the purchase. This part should only be replaced once the engine is cool and all work should be done in a well-ventilated area. A screwdriver and socket set will be required to replace this part.

Flange screws have a flange located near the top of the screw, which helps to distribute the connection force over a larger area to reduce potential damage to the machine. It also allows the screws to be used in oversized or irregular holes, and it helps to ensure they stay in place. This flange screw also has a hex top. Screws can last for a long time. However, they may become corroded or worn over time and need to be replaced. They could also become lost and need a replacement. Without all of the screws in the proper places in a machine, it could vibrate too much, which could render it less effective or unsafe to use. The flange screw is a genuine OEM part that can be used with many types of machines including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, generators, wood chippers, and other small engines. The screws are compatible with Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, Simplicity, and MTD.

The stop switch, sometimes called a kill switch, is triggered to stop the engine when the operator is no longer on the seat ,This is important for safety. If the stop switch is not functioning properly, inspect it for damage and replace it right away. Operating a machine without a functional stop switch can be dangerous. The stop switch is a genuine OEM part, and it is sold individually. The switch can work for many types of equipment including lawn tractors, lawnmowers, log splitters, wood chippers, pressure washers, and tillers. The replacement part is compatible with a range of brands, including Midwest Engine, Toro, Craftsman, Briggs & Stratton, Lawn-Boy, Murray, Snapper, and MTD.

This genuine OEM replacement part is a spark plug terminal for a wide variety of small combustion engines. In a combustion engine, the spark plug generates a small electrical charge that creates enough power to start up the ignition and engage combustion. The plug connects to the ignition through the terminal. Spark plugs generate and then pass a small electrical current through to the ignition. Usually, the main issue with spark plugs is that this current hyper-extends and ends up frying the spark plug. However, if the terminal is damaged, the charge will not pass into the ignitor, and the engine will not turn. If the spark plug can carry a charge but the engine still won't turn, it's likely the terminal that needs replacing. This is an easy repair because the terminal should just snap on and off. If stuck, a pair of needle-nose pliers should make it easier. This high-quality replacement part is compatible with engines from Murray, Toro, Lawn Boy, and Briggs & Stratton. It is sourced from the original manufacturer and ships individually.

This exhaust gasket is a genuine Midwest Engine replacement part for appliances that use small engines, such as chipper shredders, snowblowers, leaf blowers, and lawn mowers. The function of an exhaust gasket is to seal off the carburetor from the exhaust tube in order to protect the engine from the accumulation of dirt, debris, and gunk within the inner workings. The exhaust gasket may require replacement over time from general wear and tear. If the exhaust gasket is not sealing, allowing dirt and debris to accumulate within the carburetor and leaving the exhaust tube exposed, the part should be replaced immediately. Evidence of a damaged exhaust gasket could also manifest in the form of oil leakage, black smoke arising out of the exhaust tube, and unusually low pressure from the combustion when using the appliance. Any of these symptoms can be attributable to multiple factors, so one should assess if the exhaust gasket is responsible before ordering a replacement.This exhaust gasket is compatible with the following brands: Briggs and Stratton, Cub Cadet, Toro, and Simplicity. This part sold individually.

This spring brake is a genuine Midwest Engine part that can be used as a replacement part for outdoor appliances with small engines, including lawn mowers, chipper shredders, snowblowers, and other such appliances. Spring brakes are a braking system employed a large, coiled spring that is kept under high tension; the control valves attached to the spring brake are the mechanism by which the spring brake is released.If the spring brake has been damaged, is malfunctioning, or is in a state of disrepair, this will manifest in the form of a sudden, volatile eruption from the air brake chamber. This is a dangerous state for a small engine, so repair should be conducted immediately. Additionally, a new spring brake part should be ordered before any attempt to use the appliance without a proper repair. Remember to always wear gloves when handling, repairing, and operating outdoor equipment, and stay safe around the small engine of the appliance if the spring brake has malfunctioned and caused a dangerous situation.This spring brake is compatible with the brands Briggs and Stratton, Cub Cadet, and Toro.

This is a foam pre-filter that is used to help prevent dust, pollen, and other debris from clogging the air filters of small engines. One of the most common problems faced by small engines is an inadequate air supply caused by air filters that have become mired with airborne debris. Cleaning or replacing filters can become a tiresome and expensive proposition. If filters are not adequately cared for, they perform poorly, waste gasoline, pollute the air, and cause internal engine damage. A good way to help an air filter do its job is by adding a foam pre-filter in the air filter compartment. Pre-filters are exposed to all the things that clog air intakes, so periodically, they also must be replaced. Foam pre-filters are designed to fit snugly inside the housing of the air filter of virtually all small engine housings. To install a pre-filter, remove the air filter housing by taking off the one screw holding it in place. Remove the air filter from the housing and place the pre-filter inside against the exterior wall of the housing with the arrows pointing up. Reinstall the air filter. The paper of the filter should fit perfectly against the labeled side of the pre-filter. Now simply reattach the air filter housing. Genuine Midwest Engine makes this OEM replacement part, and it is sold separately.

This OEM air cleaner cover from Briggs & Stratton fits over the air cleaner and filter system, protecting the filters from excess dirt, debris, and other potential damage. This cover is also designed to help hold the air filter in place. The plastic housing is durable, but it can be subject to damage over time. This replacement is a snap-on cover, so no tools are required. Be sure to wear gloves when performing any kind of work on lawn and garden equipment. This air cleaner cover is designed to work with multiple types of lawn and garden equipment from Briggs & Stratton, Lawn-Boy, and Toro. It works with various engines on generators and lawnmowers, including hundreds of different specific models. It is sold individually and does not include the actual air filter or the bottom part of the housing.

The primer is used to help circulate fuel to the carburetor, which ensures that the engine starts quickly. Primers can start to wear out over time, which can cause the engine to leak gas or the engine not to start at all. In those cases, it is time to look at the carburetor primer to see if it is properly in place and that it is still in good shape. If there is an issue, it is time to replace it. This genuine OEM replacement carburetor primer part is high-quality and is made to work with lawn mowers and small engines from a range of different brands. These brands include the likes of Craftsman, Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, and Simplicity.