Parts for Briggs & Stratton 12F612-0115-E2: Air Cleaner, Controls, Exhaust System, Governor Spring, Ignition Parts

This is a genuine intake gasket replacement that is designed for use in certain lawn mower engines. This specialty intake gasket is what is responsible for creating the seal between the carburetor and the breather tube so that no gases or fluids leak when they pass between the two. This gasket is subjected to constant high pressure, vibrations, and extreme temperatures, and over time it will need replaced. Gaskets are generally considered a part of routine maintenance on most engines, and many owners will choose to keep a few extra on hand in case of an urgent repair need. This genuine OEM intake gasket is manufactured by Briggs & Stratton and designed to offer an identical replacement for the original gasket that came on the new unit. It is compatible with lawn mower engines in models from Briggs & Stratton and Toro, and will fit on over 150 different engine models in lawn mowers from these brands. The intake gasket is made of durable composite material. It is also a good idea to replace gaskets when servicing the carburetor to ensure a proper seal after reassembly. Be sure to use the right tools to install this part so that it isn't damaged in the process.

Seals between carburetor and air filter on lawn and garden engines. Replace if worn, cracked, or leaking to prevent dirty air from affecting performance.

This governor spring is a genuine Midwest Engine part, sold individually. This governor spring can be used as a replacement part for a pressure washer. The purpose of a governor spring in a pressure washer is to open the throttle of the appliance and maintains its positioning so that the speed and pacing of the appliance can be controlled by the operator.The governor spring might have to be replaced if it suffers damage that affects its ability to maintain spring tension. The governor spring could be cracked, punctured, scraped, or eroded from general wear and tear over long-term use or as the result of an accident that warps the component beyond functionality. If this occurs, the governor spring should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer, and it is sold individually. This governor spring is compatible with the following outdoor appliance brands: Midwest Engine and Briggs & Stratton.

Control wire casing for lawn and garden engines. Protects and guides throttle or choke control cables. Replace if cracked, split, or missing.

Control wire for lawn and garden engines. Connects controls to engine throttle or choke mechanisms. Replace if frayed, broken, kinked, or missing.

Metal mounting screw for lawn and garden engines. Secures components together throughout the equipment. Replace when stripped, rusted, or missing.

This standard engine screw is responsible for securing various components and has multiple applications or locations, depending on the type and model of the lawn and garden equipment. It needs to be in good condition to continue to work effectively. Over time, however, hardware can come loose, be lost, break, or be otherwise worn or damaged, which would require a replacement. This screw can provide a solution for a number of applications on various engines. This genuine OEM replacement screw is manufactured to exact standards by Briggs & Stratton. It is compatible with hundreds of engines in lawn mowers and generators. Check the owner's manual for part location, as well as appropriate replacement procedure. This screw is made from durable metal and sold as an individual unit. Those who need more than one screw will have to order multiple quantities. This hardware should always be installed properly according to the manufacturer's recommendations and is a specialty screw that has specific uses. Not using the OEM screw replacement could cause operational issues or void any warranties that are in place.

This is replacement air cleaner screw is compatible with a range of different types of lawn and garden equipment that have air cleaners. The screw is used to ensure the air cleaner is properly fastened to the machine. Without the screw, the air cleaner would not stay in place. The air cleaner screw could suffer damage in a range of ways. It might simply be from wear and tear or corrosion from the elements. In addition, it could have been damaged or the threads could have become stripped. If the threads are damaged, it will not hold properly. The air cleaner screw could have been lost, as well. In any of these instances, the owner will want to replace the screw. This is a genuine OEM replacement air cleaner screw that is sold individually. The screw can be used with pressure washers, wood chippers, chainsaws, leaf blowers, lawn mowers, and other small engines with an air cleaner. Compatible brands include Craftsman, Briggs & Stratton, Toro, Cub Cadet, Homelite, Murray, Simplicity, Lawn-Boy, and MTD.

Replacement air filter cartridge for lawn and garden equipment engines. Replace when dirty or clogged to restore performance. Verify fit with your model.

The breather tube is responsible for filtering out exhaust gases from the crankcase. It has special fibers in the tube to remove contaminants as it moves the exhaust gases through the ventilation valve and out into the air. The tube also helps ensure that the engine air stays cool for optimal performance. This rubber tube can become dry and cracked over time, or it could be damaged due to an incident or impact. In any case, the tube should be fully replaced when it is not functional to ensure optimal performance at all times. This genuine OEM breather tube is manufactured to exact standards and made by Briggs and Stratton. It is compatible with select engines on more than 150 lawn mowers and generators from Toro, Briggs & Stratton, and Lawn Boy. This replacement tube is made of high-quality materials and sold as an individual part. No hardware or other parts are included with the purchase. This part should only be replaced once the engine is cool and all work should be done in a well-ventilated area. A screwdriver and socket set will be required to replace this part.

Flange screw for lawn and garden engines. Distributes connection force over a larger area. Replace if threads are stripped, head is damaged, or screw is missing.

Engine won't shut off when you turn the key? Replace your lawn mower's stop switch to restore safe engine control. Simple safety repair.

If your small engine won't start or has no spark, a faulty spark plug terminal may be the cause. This terminal connects the ignition coil to the plug.

This exhaust gasket is a genuine Midwest Engine replacement part for appliances that use small engines, such as chipper shredders, snowblowers, leaf blowers, and lawn mowers. The function of an exhaust gasket is to seal off the carburetor from the exhaust tube in order to protect the engine from the accumulation of dirt, debris, and gunk within the inner workings. The exhaust gasket may require replacement over time from general wear and tear. If the exhaust gasket is not sealing, allowing dirt and debris to accumulate within the carburetor and leaving the exhaust tube exposed, the part should be replaced immediately. Evidence of a damaged exhaust gasket could also manifest in the form of oil leakage, black smoke arising out of the exhaust tube, and unusually low pressure from the combustion when using the appliance. Any of these symptoms can be attributable to multiple factors, so one should assess if the exhaust gasket is responsible before ordering a replacement.This exhaust gasket is compatible with the following brands: Briggs and Stratton, Cub Cadet, Toro, and Simplicity. This part sold individually.

This OEM air cleaner cover from Briggs & Stratton fits over the air cleaner and filter system, protecting the filters from excess dirt, debris, and other potential damage. This cover is also designed to help hold the air filter in place. The plastic housing is durable, but it can be subject to damage over time. This replacement is a snap-on cover, so no tools are required. Be sure to wear gloves when performing any kind of work on lawn and garden equipment. This air cleaner cover is designed to work with multiple types of lawn and garden equipment from Briggs & Stratton, Lawn-Boy, and Toro. It works with various engines on generators and lawnmowers, including hundreds of different specific models. It is sold individually and does not include the actual air filter or the bottom part of the housing.