Parts for Briggs & Stratton 127602-0331-E2: Air Cleaner, Exhaust System Parts

This is a genuine OEM air cleaner gasket replacement sourced directly from the manufacturer. This gasket provides the seal between the carburetor and air filter on various lawn and garden engines. The seal is essential to engine performance. If dirty air or too much air gets into the carburetor, the ratio of fuel to air will be off and the engine may misfire, not run at all, or die during operation. Normal use of outdoor machinery will produce wear and tear on the air cleaner gasket that cannot be seen during operation. It isn't until the engine runs badly that the worn gasket is discovered. This is remedied by including the air cleaner gasket in regularly scheduled maintenance. Before changing the air cleaner gasket, make sure the engine is cool. Severe burns can happen if the engine is still hot. Wear gloves while making repairs as an added layer of protection. Remove the air cleaner cover and air filter to access the gasket. Remove the gasket and clean behind the gasket. Install the new gasket, making sure the part is flat. Reinstall the air filter and cover. This air cleaner gasket is sold individually. This gasket is compatible with small engines manufactured by Briggs & Stratton and Cub Cadet.

This standard engine screw is responsible for securing various components and has multiple applications or locations, depending on the type and model of the lawn and garden equipment. It needs to be in good condition to continue to work effectively. Over time, however, hardware can come loose, be lost, break, or be otherwise worn or damaged, which would require a replacement. This screw can provide a solution for a number of applications on various engines. This genuine OEM replacement screw is manufactured to exact standards by Briggs & Stratton. It is compatible with hundreds of engines in lawn mowers and generators. Check the owner's manual for part location, as well as appropriate replacement procedure. This screw is made from durable metal and sold as an individual unit. Those who need more than one screw will have to order multiple quantities. This hardware should always be installed properly according to the manufacturer's recommendations and is a specialty screw that has specific uses. Not using the OEM screw replacement could cause operational issues or void any warranties that are in place.

This is replacement air cleaner screw is compatible with a range of different types of lawn and garden equipment that have air cleaners. The screw is used to ensure the air cleaner is properly fastened to the machine. Without the screw, the air cleaner would not stay in place. The air cleaner screw could suffer damage in a range of ways. It might simply be from wear and tear or corrosion from the elements. In addition, it could have been damaged or the threads could have become stripped. If the threads are damaged, it will not hold properly. The air cleaner screw could have been lost, as well. In any of these instances, the owner will want to replace the screw. This is a genuine OEM replacement air cleaner screw that is sold individually. The screw can be used with pressure washers, wood chippers, chainsaws, leaf blowers, lawn mowers, and other small engines with an air cleaner. Compatible brands include Craftsman, Briggs & Stratton, Toro, Cub Cadet, Homelite, Murray, Simplicity, Lawn-Boy, and MTD.

This filter is used for lawn and garden equipment. A dirty or clogged filter could cause the engine to run poorly.

The breather tube is responsible for filtering out exhaust gases from the crankcase. It has special fibers in the tube to remove contaminants as it moves the exhaust gases through the ventilation valve and out into the air. The tube also helps ensure that the engine air stays cool for optimal performance. This rubber tube can become dry and cracked over time, or it could be damaged due to an incident or impact. In any case, the tube should be fully replaced when it is not functional to ensure optimal performance at all times. This genuine OEM breather tube is manufactured to exact standards and made by Briggs and Stratton. It is compatible with select engines on more than 150 lawn mowers and generators from Toro, Briggs & Stratton, and Lawn Boy. This replacement tube is made of high-quality materials and sold as an individual part. No hardware or other parts are included with the purchase. This part should only be replaced once the engine is cool and all work should be done in a well-ventilated area. A screwdriver and socket set will be required to replace this part.

Flange screws have a flange located near the top of the screw, which helps to distribute the connection force over a larger area to reduce potential damage to the machine. It also allows the screws to be used in oversized or irregular holes, and it helps to ensure they stay in place. This flange screw also has a hex top. Screws can last for a long time. However, they may become corroded or worn over time and need to be replaced. They could also become lost and need a replacement. Without all of the screws in the proper places in a machine, it could vibrate too much, which could render it less effective or unsafe to use. The flange screw is a genuine OEM part that can be used with many types of machines including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, generators, wood chippers, and other small engines. The screws are compatible with Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, Simplicity, and MTD.

This exhaust gasket is a genuine Midwest Engine replacement part for appliances that use small engines, such as chipper shredders, snowblowers, leaf blowers, and lawn mowers. The function of an exhaust gasket is to seal off the carburetor from the exhaust tube in order to protect the engine from the accumulation of dirt, debris, and gunk within the inner workings. The exhaust gasket may require replacement over time from general wear and tear. If the exhaust gasket is not sealing, allowing dirt and debris to accumulate within the carburetor and leaving the exhaust tube exposed, the part should be replaced immediately. Evidence of a damaged exhaust gasket could also manifest in the form of oil leakage, black smoke arising out of the exhaust tube, and unusually low pressure from the combustion when using the appliance. Any of these symptoms can be attributable to multiple factors, so one should assess if the exhaust gasket is responsible before ordering a replacement.This exhaust gasket is compatible with the following brands: Briggs and Stratton, Cub Cadet, Toro, and Simplicity. This part sold individually.

This OEM air cleaner cover from Briggs & Stratton fits over the air cleaner and filter system, protecting the filters from excess dirt, debris, and other potential damage. This cover is also designed to help hold the air filter in place. The plastic housing is durable, but it can be subject to damage over time. This replacement is a snap-on cover, so no tools are required. Be sure to wear gloves when performing any kind of work on lawn and garden equipment. This air cleaner cover is designed to work with multiple types of lawn and garden equipment from Briggs & Stratton, Lawn-Boy, and Toro. It works with various engines on generators and lawnmowers, including hundreds of different specific models. It is sold individually and does not include the actual air filter or the bottom part of the housing.

The primer is used to help circulate fuel to the carburetor, which ensures that the engine starts quickly. Primers can start to wear out over time, which can cause the engine to leak gas or the engine not to start at all. In those cases, it is time to look at the carburetor primer to see if it is properly in place and that it is still in good shape. If there is an issue, it is time to replace it. This genuine OEM replacement carburetor primer part is high-quality and is made to work with lawn mowers and small engines from a range of different brands. These brands include the likes of Craftsman, Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, and Simplicity.